SET OF 8 COMPONENTS FOR DELAY UNIT TO DRG NO.TRD-2-2-2226 OF84MM HEAT-551.1) CLOSING SLEEVE (2) CLOSING DISC (3) GASKET4) DELAY BODY UPPER (5) DELAY BODY LOWER (6) WASHER7) DISC (8) "O"RING 8.1 X 1.6.DRG NO. AS PER ATTACHED LIST.

SET OF 8 COMPONENTS FOR DELAY UNIT TO DRG NO.TRD-2-2-2226 OF84MM HEAT-551.1) CLOSING SLEEVE (2) CLOSING DISC (3) GASKET4) DELAY BODY UPPER (5) DELAY BODY LOWER (6) WASHER7) DISC (8) "O"RING 8.1 X 1.6.DRG NO. AS PER ATTACHED LIST.

SET OF 8 COMPONENTS FOR DELAY UNIT TO DRG NO.TRD-2-2-2226 OF84MM HEAT-551.1) CLOSING SLEEVE (2) CLOSING DISC (3) GASKET4) DELAY BODY UPPER (5) DELAY BODY LOWER (6) WASHER7) DISC (8) "O"RING 8.1 X 1.6.DRG NO. AS PER ATTACHED LIST.

SEALING RING TO DRG.NO.TRD-1-2-2246.

SEALING RING TO DRG.NO.TRD-1-2-2246.

SEALING RING TO DRG.NO.TRD-1-2-2246.

RIVET 2x10 TO DRG.NO.TRD-1-2-2239.

RIVET 2x10 TO DRG.NO.TRD-1-2-2239.

RIVET 2x10 TO DRG.NO.TRD-1-2-2239.

PLUNGER BLANK TO DRG NO.6417 888/DRG.NO.TRD-1-2-2293.

PLUNGER BLANK TO DRG NO.6417 888/DRG.NO.TRD-1-2-2293.

PLUNGER BLANK TO DRG NO.6417 888/DRG.NO.TRD-1-2-2293.

PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203

PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203

PIEZO ELECTRIC GENERATOR ASSY. TO DRG .NO. TRD 2-2-2203

PARTITION TO DRG.NO. TRD 1-2-2279 FOR 84MM HEAT-551.

PARTITION TO DRG.NO. TRD 1-2-2279 FOR 84MM HEAT-551.

PARTITION TO DRG.NO. TRD 1-2-2279 FOR 84MM HEAT-551.

MANTLE TO DRG.NO.TRD-2-2-2271.

MANTLE TO DRG.NO.TRD-2-2-2271.

MANTLE TO DRG.NO.TRD-2-2-2271.

LOCK WASHER JZE-2.55 TO DRG.NO.TRD-1-2-2269.

LOCK WASHER JZE-2.55 TO DRG.NO.TRD-1-2-2269.

LOCK WASHER JZE-2.55 TO DRG.NO.TRD-1-2-2269.

LINER SCREW DRG.NO.TRD-1-2-2321./ LINER SCREW TO DRG.NO. 5209558

LINER SCREW DRG.NO.TRD-1-2-2321./ LINER SCREW TO DRG.NO. 5209558

LINER SCREW DRG.NO.TRD-1-2-2321./ LINER SCREW TO DRG.NO. 5209558

DIAPHRAGM TO DRG.NO.TRD-2-2-2244.

DIAPHRAGM TO DRG.NO.TRD-2-2-2244.

DIAPHRAGM TO DRG.NO.TRD-2-2-2244.

CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.

CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.

CARBON NOZZLE BLANK TO DRG NO.6413 206/DRG.NO.TRD-1-2-2242.

SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).

SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).

SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).

BASE PLATE TO DRG.NO.6436977/ ART.NO.304052041.

BASE PLATE TO DRG.NO.6436977/ ART.NO.304052041.

BASE PLATE TO DRG.NO.6436977/ ART.NO.304052041.

BASE PLATE 8.5 MM TO DRG NO. F-1301-015081-L DC 36862-A DATE23/08/2005 SPECN:-F-1301-902040-K(b) (CIA-0308) DC 36766-ADT 14/07/2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 8.5MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATION OF TAIL END QTY.IN USER SECTION

BASE PLATE 8.5 MM TO DRG NO. F-1301-015081-L DC 36862-A DATE23/08/2005 SPECN:-F-1301-902040-K(b) (CIA-0308) DC 36766-ADT 14/07/2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 8.5MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATION OF TAIL END QTY.IN USER SECTION

BASE PLATE 8.5 MM TO DRG NO. F-1301-015081-L DC 36862-A DATE23/08/2005 SPECN:-F-1301-902040-K(b) (CIA-0308) DC 36766-ADT 14/07/2001NOTE:ENSURED THAT THE FIRM SHOULD SUPPLY THE BASE PLATE 8.5MM QYT.IN LOT SIZE -MULTIPLES OF 5345 NOS.TO AVOIDACCUMILATI

BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.

BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.

BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.

ARMING DEVICE CASING ASSY TO DRG.NO.5209 556.

ARMING DEVICE CASING ASSY TO DRG.NO.5209 556.

ARMING DEVICE CASING ASSY TO DRG.NO.5209 556.

AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243

AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243

AFT CLOSURE INSULATOR TO DRG.NO.TRD-2-2-2243

AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.

AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.

AFT CLOSURE BLANK TO DRG NO.4103 408/DRG.NO.TRD-2-2-2294.

BRUSH CLEANING 7.62mm CHAMBER / GAS CYLINDER 1A. D.S.CAT.No.: 1005-000715, D.C.No.: 17850-SA, DATED: 12/04/1984,

AS PER D.S.CAT.No.: 1005-000715, D.C.No.: 17850-SA, DATED: 12/04/1984,

D.S.CAT.No.: 1005-000715, D.C.No.: 17850-SA, DATED: 12/04/1984,

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BRUSH CLEANING RIFLE MARK 1/L, DS.CAT.NO. 1005-001120, DC.NO. 26087-SA. DT: 11/07/05 FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.

AS PER DS.CAT.NO. 1005-001120, DC.NO. 26087-SA. DT: 11/07/05 FOR DC. NO. LATEST ISSUE TO BE FOLLOWED.

DS.CAT.NO. 1005-001120, DC.NO. 26087-SA. DT: 11/07/05

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PLASTIC CONTAINER P-17D (EMPTY ASSY) DRG NO. TRD-1676 b WITHONE NO EACH OF THE FOLLOWING PACKING FITMENTS:-(a) THERMOCOL DISC BOTTOM TO DRG NO KhFQ-110639 (b) THERMOCOL DISC TOP TO DRG NO KhFQ-110640 (c) POLYTHENE SLEEVE TO DRG NO. KhFQ-110644 (d) LABLE TO DRG NO KhFQ-110645.

PLASTIC CONTAINER P-17D (EMPTY ASSY) DRG NO. TRD-1676 b WITHONE NO EACH OF THE FOLLOWING PACKING FITMENTS:-(a) THERMOCOL DISC BOTTOM TO DRG NO KhFQ-110639 (b) THERMOCOL DISC TOP TO DRG NO KhFQ-110640 (c) POLYTHENE SLEEVE TO DRG NO. KhFQ-110644 (d) LABLE TO DRG NO KhFQ-110645.

PLASTIC CONTAINER P-17D (EMPTY ASSY) DRG NO. TRD-1676 b WITHONE NO EACH OF THE FOLLOWING PACKING FITMENTS:-(a) THERMOCOL DISC BOTTOM TO DRG NO KhFQ-110639 (b) THERMOCOL DISC TOP TO DRG NO KhFQ-110640 (c) POLYTHENE SLEEVE TO DRG NO. KhFQ-110644 (d) LA

• attached

• attached

As per TE

AS per TE

As per TE

CONTAINER NO P-17 (EMPTY ASSY) TO DRG NO. TRD-2-1-2079 ONE CONTAINER WITH FOLLOWING ITEMS:-1.DISC TOP & BOTTOM SIZE 74MM X 10MM THICK EXPENDED POLYTHE- NE FOAM TO DENSITY 25 TO 30 Kg PER METER SQUARE - 02 NO.2.DISC SIZE 74MM X 0.08MM THICK COPPER FOIL TO SPECN:IS-191 DHP-I - 01 NO.3.SLEEVE TO DRG.NO.TRD 1-1-2080 - 01 NO.4.HOLDING PIECE TO DRG.NO.TRD 1-1-2081 - 01 NO.5.LABLE TO DRG.NO.TRD 1-1-2082 - 01 NO.

CONTAINER NO P-17 (EMPTY ASSY) TO DRG NO. TRD-2-1-2079 ONE CONTAINER WITH FOLLOWING ITEMS:-1.DISC TOP & BOTTOM SIZE 74MM X 10MM THICK EXPENDED POLYTHE- NE FOAM TO DENSITY 25 TO 30 Kg PER METER SQUARE - 02 NO.2.DISC SIZE 74MM X 0.08MM THICK COPPER FOIL TO SPECN:IS-191 DHP-I - 01 NO.3.SLEEVE TO DRG.NO.TRD 1-1-2080 - 01 NO.4.HOLDING PIECE TO DRG.NO.TRD 1-1-2081 - 01 NO.5.LABLE TO DRG.NO.TRD 1-1-2082 - 01 NO.

CONTAINER NO P-17 (EMPTY ASSY) TO DRG NO. TRD-2-1-2079 ONE CONTAINER WITH FOLLOWING ITEMS:-1.DISC TOP & BOTTOM SIZE 74MM X 10MM THICK EXPENDED POLYTHE- NE FOAM TO DENSITY 25 TO 30 Kg PER METER SQUARE - 02 NO.2.DISC SIZE 74MM X 0.08MM THICK COPPER FOI

As per TE

As per TE

As per TE

As per TE

As per TE

As per TE

CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 13A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 13A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

CRATE, WOOD, 13A TO DRG. PT. NO. ISV-484 A DC NO. 36296-A DT. 10/6/97 TO SPECN : - IA-948 (ak) DC NO. 36868-AAIDE MEMOIRE W/4.NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 13A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS

Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15

Body with Insulation to GSF Sketch No OTF/DD/023 for Fuze B-15

• AS PER ATTACHMENT

• AS PER ATTACHMENT

HANDLE CARRYING ASSEMBLY (PLASTIC) (ICR - 63SA) D.S.CAT.No.: 1005-004051, D.C.No.:19513-SA, DATED:25-02-1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA/150(G),

AS PER DRG (ICR - 63SA) D.S.CAT.No.: 1005-004051, D.C.No.:19513-SA, DATED:25-02-1987 DETAILS OF LATEST ISSUE SPECIFICATION CISA/150(G),

(ICR - 63SA) D.S.CAT.No.: 1005-004051, D.C.No.:19513-SA, DATED:25-02-1987

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SCREW DRIVER AS PER DRG NO K 9006 WITH FIRMS MATERIAL

AS PER DRG NO K 9006 WITH FIRMS MATERIAL

K 9006

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

ACID BORIC TECHNICAL

AS PER REQUIREMENT AND SPECIFICATION

CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BEING DEVLOPED/SUPPLIED BY NEW SOURCE/FIRM.

CRATE WOOD 12-A TO DRG.PT.NO.ISV-483-A DC NO.36999-A DATED 02/02/2005 SPECN:-IA-948(a,k)DC(I)36868-A,AIDE MEMOIRE W/4NOTE 1:-SPECIAL INSTRUCTION FOR TEST FOR CRATE WOOD 12A IS ENCLOSED.NOTE 2:-ADVANCE SAMPLE 05 NOS.ARE REQUIRED WHEN ITEM IS BEING DEV

FIXED BUTT ASSY AS PER DRG No. K 3000 STAR WITH FIRM'S MATERIAL

AS PER DRG No. K 3000 STAR WITH FIRM'S MATERIAL

K 3000 STAR

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR

BOX FOR ACCESSORIES AS PER DRG NO K 9021STAR WITH FIRMS MATERIAL REQUIRED FOR TAR

K 9021STAR

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SUPPLY OF PACKING BOX AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL

AS PER DRG NO. K 9024 WITH FIRM'S MATERIAL

K 9024

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SLUSH BRUSH AS PER DRG No K 9009 WITH FIRM'S MATERIAL

AS PER DRG No K 9009 WITH FIRM'S MATERIAL

K 9009

OIL BOTTLE AS PER DRG No K 9008 WITH FIRMS MATERIAL

AS PER DRG No K 9008 WITH FIRMS MATERIAL

K 9008

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL

SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL

K 9007STR

• AS PER DRAWING

• SLING ASSY AS PER DRG NO K 9007 STR WITH FIRMS MATERIAL

BRUSH AS PER DRG No K 9003* WITH FIRMS MATERIAL

AS PER DRG No K 9003* WITH FIRMS MATERIAL

K 9003*

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL

CLEANING ROD FOR SIDE FOLDABLE BUTT AS PER DRG NO K 9011STR WITH FIRMS MATERIAL

K 9011STR

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CLEANING ROD EXTENSION AS PER DRG No K 9002 WITH FIRMS MATERIAL

AS PER DRG No K 9002 WITH FIRMS MATERIAL

K 9002

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

CLEANING ROD AS PER DRG No. K 9001 WITH FIRM'S MATERIAL

AS PER DRG No. K 9001 WITH FIRM'S MATERIAL

K 9001

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

MAGAZINE ASSY AS PER DRG No. K 7000 WITH FIRM'S MATERIAL

AS PER DRG No. K 7000 WITH FIRM'S MATERIAL

K 7000

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

EXTENDABLE BUTT ASSY AS PER DRG No. K 5000 WITH FIRMS MATERIAL

AS PER DRG No. K 5000 WITH FIRMS MATERIAL

K 5000

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

UPPER HAND GUARD ASSY AS PER DRG No.K-2050 WITH FIRMS MATERIAL

AS PER DRG No.K-2050 WITH FIRMS MATERIAL

K 2050

LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

LOWER HAND GUARD ASSY AS PER DRG No K 2040 STAR7 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE

K 2040 STAR 7

• AS PER DRAWING ATTACHED

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

GRIP PISTOL AS PER DRG No.TAR-RB-K-1026 WITH FIRM'S MATERIAL

AS PER DRG No.TAR-RB-K-1026

TAR-RB-K-1026

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

PLATE BUTT TO DRG.No.: 29P 0049 required for 0.315" Sporting Rifle

AS PER DRG.No.: 29P 0049 required for 0.315" Sporting Rifle

29P 0049

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

GUARD HAND TO DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL

AS PER DRG.NO. 32P 4002*3 REQ.FOR 40mm UBGL

32P 4002*3

BRUSH CLEANING BARREL TO DRG NO 32P 5001. (CES ITEM) REQD FOR UBGL

AS PER DRG NO 32P 5001. (CES ITEM) REQD FOR UBGL

32P 5001

AVIATION COMPRESSOR AK 150C ASSY TO DRG. NO. AK 150C-01 CB

AVIATION COMPRESSOR AK 150C ASSY TO DRG. NO. AK 150C-01 CB

DRG. NO. AK 150C-01 CB

Alo Resin Abrasive Cloth of 50 mtrs

IS:715-1976

AS PER REQUIREMENT & SPECIFICATION

AS PER REQUIREMENT & SPECIFICATION

PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015

PROV.SPECN.NO.DMSRDE/ES&S/2008/231 ISSUED ON 19/05/2015

S.M Wire Bright Drawn Hard 4.00 mm Dia

IS:280 latest half hard

4020-000298 CORDAGE NYLON BRAIDED 1785 N FOR PERSONNEL PARA U/D as per Specification

SPECIFICATION NO.: JSS-4020-8 (i) Sampling Plan as per Annexure I attached.(ii) 100% sampling,inspection & testing will be resorted to (iii)In appearance, workmanship finish &other respects not defined in this JSS specification the material shall conform to the sealed pattern held in the custody of The Controller, CQAT&C, Kanpur (iv) hank length should be 270 + 05. - 00

CORDAGE NYLON BRAIDED 250 KG OLIVE DRAB SHADE NO.298 FOR PTAM

IS:SPECN NO.IS:5-1994, JSS:4020-8 ROLL LENGTH 285 MTR. EX-SAMPLING

USED FOR FLOAT

AS PER OPF

IND/TC/2123 (b)

IND/TC/2123 (b)

As per drg. (2A26-02-81)

As per drg. (2A26-02-81)

2A26-02-81

SUPPLY OF PREMACHINED BLANK S 2 TO DRG NO TEND 2607 STAR 5 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001STAR4 FIXED BUTT FOR TAR

AS PER DRG NO. TEND 2607 STAR 5 WITH OFT MATERIAL

K 3001 STR 4

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

Arm to casting drg no. D-4082416

Arm to casting drg no. D-4082416

D-4082416

Arm to Drg No. D-6358150

Arm to Drg No. D-6358150

D-6358150

As per requirements & Specifications

As per requirements & Specifications

FINISHED HOUSING TO DRG. NO. 188-94-001 FOR TRAVERSE REDUCTION GEAR UNIT CODE-94 (AS PER VENDOR QUALIFICATION CRITERIA & SCOPE OF WORK IN ANNEXURE-1)

FINISHED HOUSING TO DRG. NO. 188-94-001 FOR TRAVERSE REDUCTION GEAR UNIT CODE-94 (AS PER VENDOR QUALIFICATION CRITERIA & SCOPE OF WORK IN ANNEXURE-1)

188-94-001

For 51mm SMK & illg.

For 51mm SMK & illg.

PARTED BILLETS AS PER DRG. NO.SK-9719/A Steel To Specn. JSS 9510-1 2013 Grade- SS/B-27 For 105MM IFG HE

PARTED BILLETS AS PER DRG. NO.SK-9719/A Steel To Specn. JSS 9510-1 2013 Grade- SS/B-27 For 105MM IFG HE

SK-9719/A

PARTED SHELL BILLETS FOR BODY 105MM CARRIER SHELLS AS PER DRG. NO.SK-9748/B & MEETING THE REQUIREMENT AS PER DRG NO SK-5934/C (MATERIAL SPCN: IS:5517 1978.35Mn6Mo3Rs63)

PARTED SHELL BILLETS FOR BODY 105MM CARRIER SHELLS AS PER DRG. NO.SK-9748/B & MEETING THE REQUIREMENT AS PER DRG NO SK-5934/C (MATERIAL SPCN: IS:5517 1978.35Mn6Mo3Rs63)

SK-9748/B &SK-5934/C

BS:1449 PS-I-83 grade-43/35 size: 95MM+/-0.25 wide thickness 2.0MM+/-0.06x920+15mm long

BS:1449 PS-I-83 grade-43/35 size: 95MM+/-0.25 wide thickness 2.0MM+/-0.06x920+15mm long

ITV-46

Hot Rolled Steel Rod 90MM(+/-1) Dia to Specn.IS:5517-1978, 35 MN6 MO3 RS100 MN to be Heat Treated to Achieve Hardness 210 to 260 VPN in Finished Condition

Hot Rolled Steel Rod 90MM(+/-1) Dia to Specn.IS:5517-1978, 35 MN6 MO3 RS100 MN to be Heat Treated to Achieve Hardness 210 to 260 VPN in Finished Condition

Specn.IS:5517-1978, 35 MN6 MO3 RS100 MN

Drg. No.SK-7894/B

Drg. No.SK-7894/B

SK-7894/B

Drg. No.SK-8370

Drg. No.SK-8370

As per OFC Drg. NO. SK-9367/A

As per OFC Drg. NO. SK-9367/A

SK-9367/A

O Ring 188*5.4 As Per Drg No. 86030201030000200PA

O Ring 188*5.4 As Per Drg No. 86030201030000200PA

86030201030000200PA

O Ring 171.7*5.3 As Per Drg No. 86030201030000200PA

O Ring 171.7*5.3 As Per Drg No. 86030201030000200PA

86030201030000200PA

O Ring 191*5.4 As Per Drg No. 86030201090000300PA

O Ring 191*5.4 As Per Drg No. 86030201090000300PA

86030201090000300PA

O Ring 133*4 As Per Drg No. 86030201120000300PA

O Ring 133*4 As Per Drg No. 86030201120000300PA

86030201120000300PA

O Ring 188*5.4 As Per Drg No. 86030201090000300PA

O Ring 188*5.4 As Per Drg No. 86030201090000300PA

86030201090000300PA

Compression Spring to Drg No. 8603 02 01 11 00 004 00PA

Compression Spring to Drg No. 8603 02 01 11 00 004 00PA

8603 02 01 11 00 004 00PA

Torsion Spring to Drg No. 8603 02 01 11 00 010 00PA

Torsion Spring to Drg No. 8603 02 01 11 00 010 00PA

8603 02 01 11 00 010 00PA