IRON ORE TO SPECIFICATION IS : 5442-1992, Gr.57/59, PARTICLE SIZE- 200 +10MM. FE CONTENT SHOULD BE MINIMUM 57%"

IRON ORE TO SPECIFICATION IS : 5442-1992, Gr.57/59, PARTICLE SIZE- 200 +10MM. FE CONTENT SHOULD BE MINIMUM 57%"

FERRO MANGANESE [H C] TO SPECN. IS - 1171-1996, GRADE-Fe Mn 72 [SIZE OF THE LUMPS 50 MM TO 150 MM WITH PERCENTAGE OF FINES LIMITED UP TO 10 %,]

FERRO MANGANESE [H C] TO SPECN. IS - 1171-1996, GRADE-Fe Mn 72 [SIZE OF THE LUMPS 50 MM TO 150 MM WITH PERCENTAGE OF FINES LIMITED UP TO 10 %,]

FERRO-CHROME ( HIGH CARBON ) TO SPECIFICATION IS: 1170-1992,GRADE- 1, DESIGNATION 7 Fe Cr-65, CHEM.COMP.:- Cr%:60-70,C%:6-8,Si%:1.5-4;RESIDUAL ELEMENTS & OTHERS: AS PER SPECN. PARTICLE SIZE: BETWEEN 100 MM TO 150 MM,UNDER SIZE: 5% MAX,OVERSIZE: 10% MAX. FREE FROM EXTRANEOUS CONTAMINATIONS ETC.

FERRO-CHROME ( HIGH CARBON ) TO SPECIFICATION IS: 1170-1992,GRADE- 1, DESIGNATION 7 Fe Cr-65, CHEM.COMP.:- Cr%:60-70,C%:6-8,Si%:1.5-4;RESIDUAL ELEMENTS & OTHERS: AS PER SPECN. PARTICLE SIZE: BETWEEN 100 MM TO 150 MM,UNDER SIZE: 5% MAX,OVERSIZE: 10% MAX. FREE FROM EXTRANEOUS CONTAMINATIONS ETC.

DOLOMITE FETTLING MASS FOR HOT REPAIR OF BANK AND BOTTOM OF EAF.CHEMICAL COMPOSITION: %MgO= 36 - 40,

DOLOMITE FETTLING MASS FOR HOT REPAIR OF BANK AND BOTTOM OF EAF.CHEMICAL COMPOSITION: %MgO= 36 - 40,

FLUORSPAR TO SPECIFICATION - IS-4574-1989 (REAFFIRMED-2003)GRADE-3 [COMPOSITION:CAF2-80 % MIN,SiO2-8% MAX,CaCO3 -3% MAX MIXED OXIDE(R2O3 - 3.5% MAX,S-0.3% MAX,Pb - 0.3% MAX).PELLET FORM HAVING SIZE - 1" TO 3".

FLUORSPAR TO SPECIFICATION - IS-4574-1989 (REAFFIRMED-2003)GRADE-3 [COMPOSITION:CAF2-80 % MIN,SiO2-8% MAX,CaCO3 -3% MAX MIXED OXIDE(R2O3 - 3.5% MAX,S-0.3% MAX,Pb - 0.3% MAX).PELLET FORM HAVING SIZE - 1" TO 3".

CRADLE CLAMP PART NO 1148547

CRADLE CLAMP PART NO 1148547

• as per Annexure L

• as per Annexure L

AL FLAT 120X85MM IS:733-1983,76528

AL FLAT 120X85MM IS:733-1983,76528

AL ANGLE 60X40X5 IS733-83,64430 WP

AL ANGLE 60X40X5 IS733-83,64430 WP

AL FLAT 130X100MM IS:733-1983,76528

AL FLAT 130X100MM IS:733-1983,76528

AL RD 95MM DIA IS:733-1983, 76528 WP

AL RD 95MM DIA IS:733-1983, 76528 WP

AL PLATE 2MM THICK IS:737-08,52000

AL PLATE 2MM THICK IS:737-08,52000

ST RD 55 MM DIA IS:5517-93,42CR4M02

ST RD 55 MM DIA IS:5517-93,42CR4M02

ST SQR 125MM IS 5517-78,40NI6C

ST SQR 125MM IS 5517-78,40NI6C

ST RD 150MM DIA IS:5517-1993,40NI6C

ST RD 150MM DIA IS:5517-1993,40NI6C

ST RD 32MM BS:970,PT-1-83,817,M40

ST RD 32MM BS:970,PT-1-83,817,M40

ST RD 80MM DIA EN 10297-1-2003,25CR

ST RD 80MM DIA EN 10297-1-2003,25CR

RD HSS 19MM DIA T70W18CR4VI

RD HSS 19MM DIA T70W18CR4VI

ST SHEET SIZE:1MM TH IS1570-61C-25

ST SHEET SIZE:1MM TH IS1570-61C-25

ST RD 12MM DIATO SPECN C-25

ST RD 12MM DIATO SPECN C-25

ST RD 90MM DIA IS:8500-91,GD.FE490B

ST RD 90MM DIA IS:8500-91,GD.FE490B

ST.RD.40MM IS:4431-78,GD.11C10S25

ST.RD.40MM IS:4431-78,GD.11C10S25

BRACKET INVEST CASTING 3053375D

BRACKET INVEST CASTING 3053375D

BRACKET INVESTMENT CAST.GCF/50/39183

BRACKET INVESTMENT CAST.GCF/50/39183

AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS

AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS

AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS

AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS

AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS

AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS

AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS

AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS

AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS

AS PER GCF SPECIFICATION.DRG/SIZE & REQUIREMENTS

RING PRONG SNAP BUTTON-9MM SHALL BE MADE AS PER MATERIAL GIVEN IN 4741-1968, ALL FOUR PARTS SHALL BE NIKLE-PLATED AND CONFORM TO GRADE-B OF IS:1068-1958. SNAP SHALL DISENGAGE WHENTHEY ARE SUBJECT TO PULL WITH 1.0 +/-0.3 kgf APPLIED ALONGITS CENTRE LINE ASPER ASTM D4846- 96(REAPPROVED 2011).DESIGN/DIMENSIONS AS PER SAMPLE HELD IN CQA(T&C),KANPUR.AS PER RELEVANT CLAUSE OF SPECIFICATIONA

RING PRONG SNAP BUTTON-9MM SHALL BE MADE AS PER MATERIAL GIVEN IN 4741-1968, ALL FOUR PARTS SHALL BE NIKLE-PLATED AND CONFORM TO GRADE-B OF IS:1068-1958. SNAP SHALL DISENGAGE WHENTHEY ARE SUBJECT TO PULL WITH 1.0 +/-0.3 kgf APPLIED ALONGITS CENTRE LINE ASPER ASTM D4846- 96(REAPPROVED 2011).DESIGN/DIMENSIONS AS PER SAMPLE HELD IN CQA(T&C),KANPUR.AS PER RELEVANT CLAUSE OF SPECIFICATIONA

HIGH ALUMINA REFRACTORY CEMENT. TRADE NAME :"WHYTHEAT GRADE LWB SPECN: Al2O3: 90%MIN.,SiO2:2 TO 3 %, Fe2O3:0.75% (0.80% MAX) MAX.SERVICE TEMPERATURE:1750 DEG.C.MAX.GRAIN SIZE :5 MM. PACKED IN 50 KGS HDPE BAGS.

HIGH ALUMINA REFRACTORY CEMENT. TRADE NAME :"WHYTHEAT GRADE LWB SPECN: Al2O3: 90%MIN.,SiO2:2 TO 3 %, Fe2O3:0.75% (0.80% MAX) MAX.SERVICE TEMPERATURE:1750 DEG.C.MAX.GRAIN SIZE :5 MM. PACKED IN 50 KGS HDPE BAGS.

GRAPHITE CRUCIBLE FOR LADDLE OF SLAG MELTING FURNACE AS PER MSF DRG NO. LFVD/1000/22 (SHEET NO.3/3)

GRAPHITE CRUCIBLE FOR LADDLE OF SLAG MELTING FURNACE AS PER MSF DRG NO. LFVD/1000/22 (SHEET NO.3/3)

MSF DRG NO. LFVD/1000/22 (SHEET NO.3/3)

BOTTOM POURING S.G IRON INGOT MOULD TO SIZE 385 MM DIA X2265 MM LONG AS PER DRG. NO. OH-391. MATERIAL SPECN. SPHEROIDAL CAST IRON IS:1865 GRADE:400/18. FIRM SHOULD SUBMIT T.C. FROM, NABL ACCREDITED/GOVT. APPROVED LAB ONLYFOR BASIC METAL & MECHANICAL PROPERTIES.

MATERIAL SPECN. SPHEROIDAL CAST IRON IS:1865 GRADE:400/18

DRG. NO. OH-391

BOTTOM POURING S.G.IRON INGOT MOULD TO SIZE 450 MM DIAX2250MM LG AS PER DRG. NO-O.H.-387. MATL. SPECN-SPHEROIDAL CASTIRON AS PER IS:1865 GRADE 400/18. FIRM SHALL SUBMIT T.C.FROMNABL ACCREDITED/GOVT APPROVED LAB. ONLY FOR BASIC MATERIALAND MECHANICAL PROPERTIES

SPECN-SPHEROIDAL CASTIRON AS PER IS:1865

DRG. NO-O.H.-387

BOTTOM PLATE FOR 20 TON EAF AS PER DRAWING NO:OH-385.

BOTTOM PLATE FOR 20 TON EAF AS PER DRAWING NO:OH-385.

DRAWING NO:OH-385

4 WAY 4 MOULD BOTTOM POURING SET FOR 20 TO EAF AS PER MSF DRAWING NO:0H-389.

4 WAY 4 MOULD BOTTOM POURING SET FOR 20 TO EAF AS PER MSF DRAWING NO:0H-389.

MSF DRAWING NO:0H-389.

4 WAY 8 MOULD BOTTOM POURING SET FOR 20 TON EAF AS PER MSF DRAWING NO:OH-390.

4 WAY 8 MOULD BOTTOM POURING SET FOR 20 TON EAF AS PER MSF DRAWING NO:OH-390.

MSF DRAWING NO:OH-390.

C. I. MOULD 23"FOR RADIAL FORGING AS PER DRG. NO. OH/1012/150/1 (R1)

C. I. MOULD 23"FOR RADIAL FORGING AS PER DRG. NO. OH/1012/150/1 (R1)

DRG. NO. OH/1012/150/1 (R1)

S.G.IRON INGOT MOULD TO SIZE 20'' X 2500 MM AS PER DRG. NO-OH /1012/153 R1.MATERIAL SPECN:S.G.IRON IS:1865,GRADE:400/18.FIRM SHOULD SUBMIT T.C.FROM NABL ACCREDITED/GOVT. APPROVED LAB FOR BASIC MATERIAL & MECHANICAL PROPERTIES.

SPECN:S.G.IRON IS:1865,GRADE:400/18

DRG. NO-OH /1012/153 R1.

MANUFACTURE OF C.I. INGOT MOULD 175 MM DIA TO MSF DRG.NO. MP/121 R1.

MANUFACTURE OF C.I. INGOT MOULD 175 MM DIA TO MSF DRG.NO. MP/121 R1.

MSF DRG.NO. MP/121 R1

31 INCH C.I. INGOT MOULD AS PER MSF DRG NO.OH 1012/72 R2 (ITEM NO.1 ONLY)

31 INCH C.I. INGOT MOULD AS PER MSF DRG NO.OH 1012/72 R2 (ITEM NO.1 ONLY)

MSF DRG NO OH 1012/72 R2 (ITEM NO.1 ONLY)

"BOTTOM POURING S.G IRON INGOT MOULD TO SIZE 420MM DIA X 218 MM LONG AS PER DRG.NO.LFVD/1000/12/A REV.1. MATERIAL SPECN. SPHEROIDAL CAST IRON IS:1865, GRADE:400/18.FIRM SHOULD SUBMIT T.C FROM NABL ACCREDITED/GOVT.APPROVED LAB ONLY FOR BASIC MATAL & MECHANICAL PROPERTIES. "

MATERIAL SPECN. SPHEROIDAL CAST IRON IS:1865, GRADE:400/18.

LFVD/1000/12/A REV.1

BODY LINING REFRACTORY BRICKS FOR 15 TON ARC FURNACE FOR SET-B OF DRG.NO. 15 ARC/1000/159 R4.

BODY LINING REFRACTORY BRICKS FOR 15 TON ARC FURNACE FOR SET-B OF DRG.NO. 15 ARC/1000/159 R4.

15 ARC/1000/159 R4

BODY LINING BRICKS FOR 20/22 TON EAF AS PER DRG. NO-15ARC/1000/192.

BODY LINING BRICKS FOR 20/22 TON EAF AS PER DRG. NO-15ARC/1000/192.

15ARC/1000/192

LINER REFRACTORIES FOR RADIAL FORGING INGOT MOULD AS PER DRG. NO.LFVD/1000/13/1/R1.

LINER REFRACTORIES FOR RADIAL FORGING INGOT MOULD AS PER DRG. NO.LFVD/1000/13/1/R1.

LFVD/1000/13/1/R1

LINEAR REFRACTORIES FOR INGOT MOULD ( TYPE- A ) AS PER DRG.NO.- LFVD / 1000 / 13 R5.

LINEAR REFRACTORIES FOR INGOT MOULD ( TYPE- A ) AS PER DRG.NO.- LFVD / 1000 / 13 R5.

LFVD / 1000 / 13 R5

LADLE REFRACTORY LINING BRICKS FOR LFVD LADLE 20 TON CAPACITY AS PER DRG.NO.LFVD/1000/30 R7. SET "A" MINI KEY TYPE

LADLE REFRACTORY LINING BRICKS FOR LFVD LADLE 20 TON CAPACITY AS PER DRG.NO.LFVD/1000/30 R7. SET "A" MINI KEY TYPE

LFVD/1000/30 R7

HIGH POWER (HP) GRAPHITE ELECTRODE NOMINAL DIA 400 MM WITH 4 TPI THREAD NIPPLE AS PER IS:9050-1979. EXTRA 10% NIPPLE TO BE SUPPLIED ALONG WITH TOTAL NIPPLES REQUIRED

IS:9050-1979

GRAPHITE ELECTRODES 254 MM DIA X 1500MM LONG OF WEIGHT 134KGS EACH WITH NIPPLES FOR THE ELECTRODES OF WEIGHT 5 KGS EACH.WITH PITCH FILLED.

GRAPHITE ELECTRODES 254 MM DIA X 1500MM LONG OF WEIGHT 134KGS EACH WITH NIPPLES FOR THE ELECTRODES OF WEIGHT 5 KGS EACH.WITH PITCH FILLED.

CYLINDRICAL MACHINED GRAPHITE ELECTRODE WITH THREADED SOCKET AND CONNECTING PINS AS PER IS:9050-1979 AND DRAWING NO. ESR/100/26 R1

IS:9050-1979

ESR/100/26 R1

IS :179-1977 (V.NO.4) (REAFF. 1997) EDITION 3.5 (1998-05)

IS :179-1977 (V.NO.4) (REAFF. 1997) EDITION 3.5 (1998-05)

MACHINED BODY (WITHOUT SURFACE TREATMENT) TO DRG. NO. M-11193 A FOR 51 mm MORTAR BOMB

MACHINED BODY (WITHOUT SURFACE TREATMENT) TO DRG. NO. M-11193 FOR 51 mm MORTAR BOMB

• AS PER ATTACHMENT

• AS PER ATTACHMENT

OBTURATING COPPER BAND 143mm +0.6 MM O/D X 10 mm +0.75 mm WALL THICK X STANDARD LENGTH TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)

OBTURATING COPPER BAND 143mm +0.6 MM O/D X 10 mm +0.75 mm WALL THICK X STANDARD LENGTH TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)

OBTURATING COPPER BAND 149mm (+-0.7 MM) O/D X 13 mm (+2.00 mm/-0.00MM) THICK X 450 TO 500 MM LONG TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)

OBTURATING COPPER BAND 149mm (+-0.7 MM) O/D X 13 mm (+2.00 mm/-0.00MM) THICK X 450 TO 500 MM LONG TO SPECN. IS: 2501-72, FRTP-1. ANNEALED WITH OXYGEN 0.07% MAX. AND UTS: 20 KG/mm (MIN)

• As per attachment

• As per attachment

COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "0" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/mmsq, ELONGATION %: -40min, HARDNESS: 55 HV MAX )

COPPER TUBE 35mm +0.2 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01:1988, GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERTIES : TS-185 TO 250 N/SQMM, ELONGATION %: -40min, HARDNESS: 55 HV MAX )

COPPER NICKEL TUBE OF 76.2 MM + 0.5 I/D X 7.5 MM + 2.0 MM THICK TO SPECN. BS-STA-7 NC-8 AS DRAWN CONDN. TEST PIECES OF THE MAT SHOULD BE ANNEALED & CHECKED FOR HARDNESS 50 TO 60 VPN & 180 DEGREE BENT TEST INCLUDING THE OTHERS TESTS SPECIFIED IN THE SPECIFICATION

COPPER NICKEL TUBE OF 76.2 MM + 0.5 I/D X 7.5 MM + 2.0 MM THICK TO SPECN. BS-STA-7 NC-8 AS DRAWN CONDN. TEST PIECES OF THE MAT SHOULD BE ANNEALED & CHECKED FOR HARDNESS 50 TO 60 VPN & 180 DEGREE BENT TEST INCLUDING THE OTHERS TESTS SPECIFIED IN THE SPECIFICATION

• as per attachment

• as per attachment

COPPER ALLOY TUBE I/D 39.87-0.25 mm THICKNESS 3.2 +0.4 mm , BOTH ENDS CUT IN SQUARE, IN STRAIGHT LENGTH 1.5 TO 3 MTRS. AS PER SPEC NO. JSS-4710-01-88, GR. IV. MECHANICAL PROPERTIES: SAMPLE ON ANNEALING AT 700 (Degree) C FOR 2 HOUR TO SATISFY YIELD, Rm-240 MPa (MIN), % ELONGATION 50 mm-30(MIN)

COPPER ALLOY TUBE I/D 39.87-0.25 mm THICKNESS 3.2 +0.4 mm , BOTH ENDS CUT IN SQUARE, IN STRAIGHT LENGTH 1.5 TO 3 MTRS. AS PER SPEC NO. JSS-4710-01-88, GR. IV. MECHANICAL PROPERTIES: SAMPLE ON ANNEALING AT 700 (Degree) C FOR 2 HOUR TO SATISFY YIELD, Rm-240 MPa (MIN), % ELONGATION 50 mm-30(MIN)

• As per attachment

• As per attachment

GRIP PISTOL ASSEMBLY (PLASTIC) (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,

AS PER DRG (ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,

(ICR - 65A) D.S.CAT.No.: 1005-004030, D.C.No.:25592-SA, DATED:21/11/2002 WITH DETAILS OF LATEST ISSUE SPECIFICATION CISA/150G,

GUARD HAND LEFT & RIGHT ASSY. (PLASTIC) No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,

AS PER DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,

DRG No.2, CQA(SA)/91,D.S.CAT.No.1005-007723,D.C.No.22706-SA Dt.5-11-94 IMPROVED VERSION FOR RIFLE 7.62mm 1A1 TO D.S.CAT.No.: 1005-007504, 1005-007505, 1005-007506,1005-007507,1005-001593,1005-1718,

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

Prism Opt. Glass Mould, Optical Glass Mould As per Drg No.- ODD/C/921/2

Prism Opt. Glass Mould, Optical Glass Mould As per Drg No.- ODD/C/921/2

Drg No.- ODD/C/921/2

Prism Opt. Glass Mould as per Drg No. ODD/C/920/2

Prism Opt. Glass Mould as per Drg No. ODD/C/920/2

ODD/C/920/2

Set of Lense, HR BINO

Set of Lense, HR BINO, Drg No. MCT- 2973/1, 2977/1, 2980/1, 2981/1

MCT- 2973/1, 2977/1, 2980/1, 2981/1

Reticle Optical Instruments Drg. No. MCT-3278/1 FOR HR Bino

Reticle Optical Instruments Drg. No. MCT- 3278/1 FOR HR Bino

MCT- 3278/1

Set of Prism for HR Bino,MCT- 2954/1, 2976/1

Set of Prism for HR Bino,MCT- 2954/1, 2976/1

MCT- 2954/1, 2976/1

Gravity Die Casting for Housing EP

Gravity Die Casting for Housing EP, Drg No. ODD/C/892/2

Drg No. ODD/C/892/2

Gravity die casting for tube

gravity die casting for tube Drg No. ODD/C/893/3

ODD/C/893/3

SPECN.NO. PROV.IND/TC/1550 & ATTACHED RELEVANT DRAWINGS

SPECN.NO. PROV.IND/TC/1550 & ATTACHED RELEVANT DRAWINGS

PROV.IND/TC/1550 (7202/PK DT.21.09.13)

PROV.IND/TC/1550 (7202/PK DT.21.09.13)

BRASS SEAMLESS TUBE TO EXTRUSION( DRG. NO. M-9547A) REQUIRED FOR PR. 19B MATERIAL SHOULD BE AS PER PHYSICAL AND CHEMICAL STD. LAID DOWN IN THE GSF DRG. NO. M-9547

BRASS SEAMLESS TUBE TO EXTRUSION( DRG. NO. M-9547A) REQUIRED FOR PR. 19B

SEMI MACHINED UNION RING FROM INPUT RAW MATERIAL (I/C: 0334001043) TO OUTPUT MATL SEMI MACHINED DRG. NO:- ISX-492 FOR 40 MM PFFC SHELL

AS PER DRG.& SPECIFICATION

• AS PER ATTACHMENT

• AS PER ATTACHMENT

END COVER TO OFDC DRG.NO. SK-2921 SHEET 6 OF 7 IN FINISHED CONDITION FOR TU-1111 MODIFIED

END COVER TO OFDC DRG.NO. SK-2921 SHEET 6 OF 7 IN FINISHED CONDITION FOR TU-1111 MODIFIED

SK-2921 SHEET 6 OF 7

STOCK FORE END (SEMI FINISH) RFI SK. 7637*2 FOR 0.315 SPORTING RIFLE

STOCK FORE END (SEMI FINISH) RFI SK. 7637*2 FOR 0.315 SPORTING RIFLE

RFI SK. 7637*2

STOCK BUTT (SEMI FINISH) RFI SK.7638*2 FOR 0.315 SPORTING RIFLE

STOCK BUTT (SEMI FINISH) RFI SK.7638*2 FOR 0.315 SPORTING RIFLE

RFI SK.7638*2

STOCK FORE END FOR 30-06 SPORTING RIFLE.DRAWING NO. TSP-501

STOCK FORE END FOR 30-06 SPORTING RIFLE.DRAWING NO. TSP-501

DRAWING NO. TSP-501

STOCK BUTT FOR 30-06 SPORTING RIFLE. DRAWING NO. TSP-401

STOCK BUTT FOR 30-06 SPORTING RIFLE. DRAWING NO. TSP-401

DRAWING NO. TSP-401

LEVER SAFETY FOR 30-06 SPORTING RIFLE. DRAWING NO. TSP-726

LEVER SAFETY FOR 30-06 SPORTING RIFLE.DRAWING NO. TSP-726

DRAWING NO. TSP-726

FIRING PIN NUT FOR 30-06 SPORTING RIFLE. DRAWING NO. TSP-103

FIRING PIN NUT FOR 30-06 SPORTING RIFLE.DRAWING NO. TSP-103

DRAWING NO. TSP-103

CORROGATED PACKING BOX FOR 81 MM BOMB BODY MORTAR DRG. NO. PB-ITV-9A-1-1

CORROGATED PACKING BOX FOR 81 MM BOMB BODY MORTAR DRG. NO. PB-ITV-9A-1-1

DRG. NO. PB-ITV-9A-1-1

CORRUGATED PACKING BOX FOR BOAT-TAIL MACHINED (DRG. NO. 155-1150) FOR 8 NOS. DRG. NO. 998-PB-2080-M

CORRUGATED PACKING BOX FOR BOAT-TAIL MACHINED (DRG. NO. 155-1150) FOR 8 NOS. DRG. NO. 998-PB-2080-M

DRG. NO. 155-1150 FOR 8 NOS. DRG. NO. 998-PB-2080-M

READY MIXED PAINT, AIR DRYING SEMI GLOSSY FINISH FOR GENERAL PURPOSES, SHADE NO. 359 (MIDDLE BUFF) OF IS:5-1994 (FOURTH REVISION) WITH AMENDMENT NO. 1 SPECN NO. 168-1993 (THIRD REVISION) AS APPLICABLE FOR DEFENCE USE. 81MM BOMB BODY / BOAT TAIL UNIT

READY MIXED PAINT, AIR DRYING SEMI GLOSSY FINISH FOR GENERAL PURPOSES, SHADE NO. 359 (MIDDLE BUFF) OF IS:5-1994 (FOURTH REVISION) WITH AMENDMENT NO. 1 SPECN NO. 168-1993 (THIRD REVISION) AS APPLICABLE FOR DEFENCE USE. 81MM BOMB BODY / BOAT TAIL UNIT