GUARD HAND ASSY (FOR DARK BLUE GRAY)TO DS CAT NO.1005-007775(DC-26520-SA). CONSISTING OF:- 1) 1005-560844(DC-26635-SA) 2) 5360-007116(DC-26521-SA), 3)1005-007903(DC-26521-SA) & 4) 5305-077989 (WITH S.S.REFLECTOR). ARDE SPECN.ARDE/SPECN/538(PROV). FOR RIFLE 5.56MM.INSAS.

GUARD HAND ASSY (FOR DARK BLUE GRAY)TO DS CAT NO.1005-007775(DC-26520-SA). CONSISTING OF:- 1) 1005-560844(DC-26635-SA) 2) 5360-007116(DC-26521-SA), 3)1005-007903(DC-26521-SA) & 4) 5305-077989 (WITH S.S.REFLECTOR). ARDE SPECN.ARDE/SPECN/538(PROV). FOR RIFLE 5.56MM.INSAS.

DS CAT NO.1005-007775(DC-26520-SA). CONSISTING OF:- 1) 1005-560844(DC-26635-SA) 2) 5360-007116(DC-26521-SA), 3)1005-007903(DC-26521-SA) & 4) 5305-077989

SEMI FINISHED DOVETAIL FOR RIFLE 5.56MM INSAS.AS PER RFI SK.NO.6448*2 (EXCEPT HEAT TREATMENT AND PHOSPHATING).

SEMI FINISHED DOVETAIL FOR RIFLE 5.56MM INSAS.AS PER RFI SK.NO.6448*2 (EXCEPT HEAT TREATMENT AND PHOSPHATING).

RFI SK.NO.6448*2

DUMMY SHELL (N) FOR TEAR GAS GUN.

DUMMY SHELL (N) FOR TEAR GAS GUN.

AS PER DRAWING

HOLSTER TO DRG.NO.RFI SK-9594-PS FOR 0.32" PISTOL.

HOLSTER TO DRG.NO.RFI SK-9594-PS FOR 0.32" PISTOL.

DRG.NO.RFI SK-9594-PS

MAGAZINE ASSEMBLY DRG.NO,PS32-400.FOR 0.32" PISTOL.(TRADE FINISH WITH FIRM MATERIAL.)(WITHOUT NICKEL PLATING)

MAGAZINE ASSEMBLY DRG.NO,PS32-400.FOR 0.32" PISTOL.(TRADE FINISH WITH FIRM MATERIAL.)(WITHOUT NICKEL PLATING)

PS32-400

TRIGGER FINISH TO DRG NO.PS32-112(FROM TRADE FINISH).FOR 0.32" PISTOL

TRIGGER FINISH TO DRG NO.PS32-112(FROM TRADE FINISH).FOR 0.32" PISTOL

DRG NO.PS32-112

METALLIC MAGAZINE ASSEMBLY AS PER DRG. NO. AR/023 FOR 7.62 ASSAULT RIFLE (GHAATAK)

METALLIC MAGAZINE ASSEMBLY AS PER DRG. NO. AR/023 FOR 7.62 ASSAULT RIFLE (GHAATAK)

DRG. NO. AR/023

STOCK FORE END FOR 30-06 SPORTING RIFLE.DRAWING NO. TSP-501

STOCK FORE END FOR 30-06 SPORTING RIFLE.DRAWING NO. TSP-501

DRAWING NO. TSP-501

STOCK BUTT FOR 30-06 SPORTING RIFLE. DRAWING NO. TSP-401

STOCK BUTT FOR 30-06 SPORTING RIFLE. DRAWING NO. TSP-401

DRAWING NO. TSP-401

THINNER IN 20 LITER M.S. DRUM GEN PURPOSE FOR SYNTH. PAINT AND VARNISHES TO SPECN. IS-14314-1995 (SUITABLE FOR MIXING WITH READY MIXED PAINT TO IS 168/1993 AIR DRYING (MATT FINISH) SHA-DE O.G. TO ISC 220 OF 15.5.94 A APPLICABLE FOR DEF. USE

THINNER IN 20 LITER M.S. DRUM GEN PURPOSE FOR SYNTH. PAINT AND VARNISHES TO SPECN. IS-14314-1995 (SUITABLE FOR MIXING WITH READY MIXED PAINT TO IS 168/1993 AIR DRYING (MATT FINISH) SHA-DE O.G. TO ISC 220 OF 15.5.94 A APPLICABLE FOR DEF. USE

CPP HOLLOW CORRUGATED BOX TO DRG.NO.RFI SK.NO.6431*4(TO HOLD 5 NOS. RIFLE) FOR 30-06, 0.22", .315" SPORTING RIFLE & 12 BORE PAG.

CPP HOLLOW CORRUGATED BOX TO DRG.NO.RFI SK.NO.6431*4(TO HOLD 5 NOS. RIFLE) FOR 30-06, 0.22", .315" SPORTING RIFLE & 12 BORE PAG.

DRG.NO.RFI SK.NO.6431*4

STOCK FORE END (SEMI FINISH) RFI SK. 7637*2 FOR 0.315 SPORTING RIFLE

STOCK FORE END (SEMI FINISH) RFI SK. 7637*2 FOR 0.315 SPORTING RIFLE

RFI SK. 7637*2

HEAD BREECH BOLT (SP-18)UPTO OPERATION STAGE-XIV AS PER RFI SK.7848(WITHOUT HARDENING,CR.FLASHING & R/DIE OPERATION)WITH FIRM'S MATERIAL. FOR .315"SPORTING RIFLE.

HEAD BREECH BOLT (SP-18)UPTO OPERATION STAGE-XIV AS PER RFI SK.7848(WITHOUT HARDENING,CR.FLASHING & R/DIE OPERATION)WITH FIRM'S MATERIAL. FOR .315"SPORTING RIFLE.

RFI SK.7848

MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG

MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG

RFI SK 9609

DIE CASTING OF TRIGGER HOUSING TO DRG.NO.RFI SK.8877(SHT.1&2) FOR 12 BORE MOD.PAG.

DIE CASTING OF TRIGGER HOUSING TO DRG.NO.RFI SK.8877(SHT.1&2) FOR 12 BORE MOD.PAG.

RFI SK.8877(SHT.1&2)

MAGAZINE COVER PIPE FOR 12 BORE MODIFIED PUMP ACTION GUN, RFI DRG.NO. PAG-0009

MAGAZINE COVER PIPE FOR 12 BORE MODIFIED PUMP ACTION GUN, RFI DRG.NO. PAG-0009

PAG-0009

COCKING HANDLE (GRIP) FOR 12 BORE MODIFIED PUMP ACTION GUN, RFI DRG. NO. PAG-0056. (MATL.-NYLON-66 TO SPECN. DEF-STD.93-8/1, COLOUR- BLACK)

COCKING HANDLE (GRIP) FOR 12 BORE MODIFIED PUMP ACTION GUN, RFI DRG. NO. PAG-0056. (MATL.-NYLON-66 TO SPECN. DEF-STD.93-8/1, COLOUR- BLACK)

PAG-0056

BLANK OF BODY (70X42X220)MM TO DRG.NO.RFI SK.NO.8714 B,GRADEALUMINIUM ALLOY DTD.5124 FOR 12 BORE PAG.

BLANK OF BODY (70X42X220)MM TO DRG.NO.RFI SK.NO.8714 B,GRADEALUMINIUM ALLOY DTD.5124 FOR 12 BORE PAG.

DRG.NO.RFI SK.NO.8714

HOLSTER FOR PISTOL 9MM BERETTA & PISTOL AUTO 9MM 1A. TO DS CAT. NO.1095-003146 (DC-26404-SA). (CONSIST OF: SHT.-1, SHT.-2, SHT.-3 & SHT.-4 )

HOLSTER FOR PISTOL 9MM BERETTA & PISTOL AUTO 9MM 1A. TO DS CAT. NO.1095-003146 (DC-26404-SA). (CONSIST OF: SHT.-1, SHT.-2, SHT.-3 & SHT.-4 )

DS CAT. NO.1095-003146 (DC-26404-SA). (CONSIST OF: SHT.-1, SHT.-2, SHT.-3 & SHT.-4 )

MAGAZINE ASSEMBLY TO DS CAT NO.1005-003190 (LT.DC-24648-SADT.1-3-2000) CONSISTING OF:1)1005-003191(LT.DC-26970-SA)2)1005-003192(LT. DC-26821-SA)(3)CISA 640(LT. DC-26822-SA)4)5360-042525(LT.DC-26820-SA) FOR PISTOL AUTO 9MM 1A

MAGAZINE ASSEMBLY TO DS CAT NO.1005-003190 (LT.DC-24648-SADT.1-3-2000) CONSISTING OF:1)1005-003191(LT.DC-26970-SA)2)1005-003192(LT. DC-26821-SA)(3)CISA 640(LT. DC-26822-SA)4)5360-042525(LT.DC-26820-SA) FOR PISTOL AUTO 9MM 1A

DS CAT NO.1005-003190 (LT.DC-24648-SADT.1-3-2000) CONSISTING OF:1)1005-003191(LT.DC-26970-SA)2)1005-003192(LT. DC-26821-SA)(3)CISA 640(LT. DC-26822-SA)4)5360-042525(LT.DC-26820-SA)

LINK HAMMER TO DS CAT NO. 3040-003489 (LTDC 26826-SA DATED 06.05.2016) (MACTROTECH TEST TO ASTME 381-1984 WILL BE AS PER COL. (C) OF SL. NO. 1 OF CQA (SA) NOTE SHEET NO. 1) AND (NMIR TEST TO IS: 4163 WILL BE AS PER COL. (C) OF SL. NO. 3 OF CQA (SA) NOTE SHEET NO. 1 FOR PISTOL AUTO 9MM 1A.

LINK HAMMER TO DS CAT NO. 3040-003489 (LTDC 26826-SA DATED 06.05.2016) (MACTROTECH TEST TO ASTME 381-1984 WILL BE AS PER COL. (C) OF SL. NO. 1 OF CQA (SA) NOTE SHEET NO. 1) AND (NMIR TEST TO IS: 4163 WILL BE AS PER COL. (C) OF SL. NO. 3 OF CQA (SA) NOTE SHEET NO. 1 FOR PISTOL AUTO 9MM 1A.

DS CAT NO. 3040-003489 (LTDC 26826-SA DATED 06.05.2016)

HAMMER,MK-2 TO DS CAT NO.1005-003160(LT.DC-26820-SA ) MACRO-ETCH TEST TO ASTME-381:1984 AS PER COL.'C' OF CQA(SA) NOTE SHEET NO.1 & NMIR TEST AS PER COL.'C'AGAINST SL.NO.3 OFCQA(SA) NOTE SHEET NO.1

HAMMER,MK-2 TO DS CAT NO.1005-003160(LT.DC-26820-SA ) MACRO-ETCH TEST TO ASTME-381:1984 AS PER COL.'C' OF CQA(SA) NOTE SHEET NO.1 & NMIR TEST AS PER COL.'C'AGAINST SL.NO.3 OFCQA(SA) NOTE SHEET NO.1

DS CAT NO.1005-003160(LT.DC-26820-SA)

SLIDE TO DS.CAT. NO. 1005-003210(LT.DC-26822-SA DT.22-4-16) [MACRO ETCH TEST,DETERMINATION OF INCLUSION CONTENT AND SAM-PLING PLAIN REFER TO CQA(SA) NOTE SHEET NO.1 OF LATEST ISSUEAGAINST COLUMN "NATURE" C.] FOR PISTOL AUTO 9MM 1A.

SLIDE TO DS.CAT. NO. 1005-003210(LT.DC-26822-SA DT.22-4-16) [MACRO ETCH TEST,DETERMINATION OF INCLUSION CONTENT AND SAM-PLING PLAIN REFER TO CQA(SA) NOTE SHEET NO.1 OF LATEST ISSUEAGAINST COLUMN "NATURE" C.] FOR PISTOL AUTO 9MM 1A.

DS.CAT. NO. 1005-003210(LT.DC-26822-SA DT.22-4-16)

GUIDE SPRING MAIN ASSY.DS CAT NO.5360-007390(LT.DC-25139-SADT.08-10-2001)CONSISTING OF 1)GUIDE SPRING MAIN-1005-003186(DC-24858-SA),2)PLUG GUIDE-1005-003187(DC-24858-SA),3)SPRINGLEVER LOCKING 1005-003188 (DC-26816-SA) & CHROMIUM ALLOYSTEEL BALL 3.97MM DIA. FOR PISTOL AUTO 9MM1A

GUIDE SPRING MAIN ASSY.DS CAT NO.5360-007390(LT.DC-25139-SADT.08-10-2001)CONSISTING OF 1)GUIDE SPRING MAIN-1005-003186(DC-24858-SA),2)PLUG GUIDE-1005-003187(DC-24858-SA),3)SPRINGLEVER LOCKING 1005-003188 (DC-26816-SA) & CHROMIUM ALLOYSTEEL BALL 3.97MM DIA. FOR PISTOL AUTO 9MM1A

DS CAT NO.5360-007390(LT.DC-25139-SADT.08-10-2001)CONSISTING OF 1)GUIDE SPRING MAIN-1005-003186(DC-24858-SA),2)PLUG GUIDE-1005-003187(DC-24858-SA),3)SPRINGLEVER LOCKING 1005-003188 (DC-26816-SA)

LANYARD,PISTOL,OG 35-IN.DOUBLE TO SPECN.NO.E&S 3214-B(WS)/1 CLASS-'A' TO DS CAT NO.1005-001474 (DC-26237-SA(DT. 18.07.06)FOR PISTOL AUTO 9MM 1A

LANYARD,PISTOL,OG 35-IN.DOUBLE TO SPECN.NO.E&S 3214-B(WS)/1 CLASS-'A' TO DS CAT NO.1005-001474 (DC-26237-SA(DT. 18.07.06)FOR PISTOL AUTO 9MM 1A

DS CAT NO.1005-001474 (DC-26237-SA(DT. 18.07.06)

LOCKING PIECE FOR 9MM PISTOL AUTO 1A, DRG. NO. DS CAT. NO.1005-003146

BS:970 PT.I:1983 GR.665 M17 OR IS:4432 : 1988 DESIGNATION 20Ni 7Mo 2.

DRG. NO. DS CAT. NO.1005-003146

BODY TO DS CAT NO 1005-003145 (DC-26821-SA). MACRO-ETCH TEST ASTME 381-1984 WILL BE AS PER(C) OF SL.NO.1 OF CQA(SA)NOTE SHT.NO.1, & NMIR TEST TO IS:4163 WILL BE AS PER COL.(C) OF SL.NO.3 OF CQA(SA) NOTE SHT.NO.1 FOR PISTOL 9MM 1A.

BODY TO DS CAT NO 1005-003145 (DC-26821-SA). MACRO-ETCH TEST ASTME 381-1984 WILL BE AS PER(C) OF SL.NO.1 OF CQA(SA)NOTE SHT.NO.1, & NMIR TEST TO IS:4163 WILL BE AS PER COL.(C) OF SL.NO.3 OF CQA(SA) NOTE SHT.NO.1 FOR PISTOL 9MM 1A.

DS CAT NO 1005-003145 (DC-26821-SA).

BLADE FORE SIGHT FOR 9MM PISTOL AUTO 1A.,DS CAT NO. 1005-003187 TO 1005-3201 OR 1005-006582 TO 1005-006583

AMENDED

DS CAT NO. 1005-003187 TO 1005-3201 OR 1005-006582 TO 1005-006583

LEVER SLIDE LOCKING BLANK AS PER RFI SK 8035*3 FOR PISTOLAUTO 9MM 1A

LEVER SLIDE LOCKING BLANK AS PER RFI SK 8035*3 FOR PISTOLAUTO 9MM 1A

RFI SK 8035*3

EXTRACTOR TO DS CAT NO.5120-007879(LT.DC-26820-SADT.26.04.16(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PER COL.(C) OFSL.NO.1 OF CQA(SA) NOTE SHEET NO.1.)& (NMIR TEST TO IS:4163 WILL BE AS PER COL.(C)OF SL.NO.3 OF CQA(SA) NOTE SHEET NO.1)FOR PISTOL AUTO 9MM 1A.

EXTRACTOR TO DS CAT NO.5120-007879(LT.DC-26820-SADT.26.04.16(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PER COL.(C) OFSL.NO.1 OF CQA(SA) NOTE SHEET NO.1.)& (NMIR TEST TO IS:4163 WILL BE AS PER COL.(C)OF SL.NO.3 OF CQA(SA) NOTE SHEET NO.1)FOR PISTOL AUTO 9MM 1A.

DS CAT NO.5120-007879

SEAR FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003172

IS:3748 : 1990 DESIGNATION 75 T-6

DRG. NO. DS CAT NO-1005-003172

PRE-MACHINED BARREL BLANK TO RFI SK NO. 6409/A* ( DC/RFI/NO.02/01/09)(TP TO BE TESTED TO CONFIRM MECH.PROP.AT T-1 COND)MACROETCH TEST, NMIR TEST TO JSS:9510-06 & INCLUSION CONTENTTO IS:4163 AS PER CQA(SA) NOTE SHEET NO.1 COL.(A) OR (B) OFSL.NO.1,SL.NO.2 & SL.NO.3 RESPECTIVELY(AS THE CASE MAY BE)

PRE-MACHINED BARREL BLANK TO RFI SK NO. 6409/A* ( DC/RFI/NO.02/01/09)(TP TO BE TESTED TO CONFIRM MECH.PROP.AT T-1 COND)MACROETCH TEST, NMIR TEST TO JSS:9510-06 & INCLUSION CONTENTTO IS:4163 AS PER CQA(SA) NOTE SHEET NO.1 COL.(A) OR (B) OFSL.NO.1,SL.NO.2 & SL.NO.3 RESPECTIVELY(AS THE CASE MAY BE)

RFI SK NO. 6409/A* ( DC/RFI/NO.02/01/09)

LEVER TRIPPING (THROUGH MIM ROUTE) DRG. REF. NO.5340-016094 AND DRG. NO. RFI. SK. 10122 FOR 9MM AUTO PISTOL

LEVER TRIPPING (THROUGH MIM ROUTE) DRG. REF. NO.5340-016094 AND DRG. NO. RFI. SK. 10122 FOR 9MM AUTO PISTOL

DRG. REF. NO.5340-016094 AND DRG. NO. RFI. SK. 10122

CATCH MAGAZINE FINISH FOR 9MM AUTO PISTOL 1A, DRG. NO. DS CAT NO-1005-003148

BS:970 M40 IS:3748-1990 DESIGNATION 75. T-6

DRG. NO. DS CAT NO-1005-003148

GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY) WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TO ARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA) SK-989,3145/63 0R CQA(SA)SK-984,3145/64 OR CQA(SA)SK-981.

GRIP PISTOL(FOLDABLE BUTT) FOR BLACK COLOUR(DARK BLUE GRAY) WITH COLOUR CODE 695 TO SPECN.IS 5:2007. NORMAL VERSION TO ARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA) SK-989,3145/63 0R CQA(SA)SK-984,3145/64 OR CQA(SA)SK-981.

TO SPECN.IS 5:2007. NORMAL VERSION TO ARDE SK. NO.3145/58 OR CQA(SA)SK-975.WITH 3145/57 OR CQA(SA)SK-990.CONST.OF:3145/59 OR CQA(SA)SK-988,3145/62 OR CQA(SA) SK-989,3145

BUTT PLASTIC (SOLID) WITH SINGLE MOULDED PLASTIC PIECE AS PER DRG. NO. RFI/SK NO. 9154 FOR RIFLE 5.56 MM EXCALIBUR.

BUTT PLASTIC (SOLID) WITH SINGLE MOULDED PLASTIC PIECE AS PER DRG. NO. RFI/SK NO. 9154 FOR RIFLE 5.56 MM EXCALIBUR.

DRG. NO. RFI/SK NO. 9154

CONNECTOR BUTT EXR. FOR 5.56MM EXCALIBUR TO RFI SK.NO.7326

CONNECTOR BUTT EXR. FOR 5.56MM EXCALIBUR TO RFI SK.NO.7326

RFI SK.NO.7326

FLASH ELIMINATOR FOR 5.56MM LMG TO DS CAT NO.1005-007962 (ARDE SK NO 2689/224) (TO BE USED IN RIFLE 5.56 MM EXCALIBUR)

FLASH ELIMINATOR FOR 5.56MM LMG TO DS CAT NO.1005-007962 (ARDE SK NO 2689/224) (TO BE USED IN RIFLE 5.56 MM EXCALIBUR)

DS CAT NO.1005-007962 (ARDE SK NO 2689/224)

STOCK BUTT TO DRG NO.SPR-16*10(DC/RFI NO.06/003/09) FOR .22" SPORTING RIFLE.

STOCK BUTT TO DRG NO.SPR-16*10(DC/RFI NO.06/003/09) FOR .22" SPORTING RIFLE.

TO DRG NO.SPR-16*10(DC/RFI NO.06/003/09)

BODY FOR 0.22" SPRTING RIFLE, DRG. NO. SPR-012*4

BS 970 EN 19A (T-CONDITION) WITH NON METALLIC INCLUSION RATING TEST

DRG. NO. SPR-012*4

FOLDABLE BUTT FOR RIFLE 5.56MM INSAS(STEEL COMPT)CONSIDERINGOF BUTT FRAME ASSY, ARDE/2975/41(DC-S/515) CONSIST OF 10,11,19,20,23,29,33,35,36,37,46 & RFI.SK.NO.7225-S,7226-S,7227-S ,7369-S AND SPG.DOWEL SLEEVE 2DIA X7MM & 5DIA X 42MM & 6DIAX22MM.(HEAVY IS:5988) EXCEPT BLOCK REAR & CLEANING UNIT ASSY.

FOLDABLE BUTT FOR RIFLE 5.56MM INSAS(STEEL COMPT)CONSIDERINGOF BUTT FRAME ASSY, ARDE/2975/41(DC-S/515) CONSIST OF 10,11,19,20,23,29,33,35,36,37,46 & RFI.SK.NO.7225-S,7226-S,7227-S ,7369-S AND SPG.DOWEL SLEEVE 2DIA X7MM & 5DIA X 42MM & 6DIAX22MM.(HEAVY IS:5988) EXCEPT BLOCK REAR & CLEANING UNIT ASSY.

ARDE/2975/41(DC-S/515) CONSIST OF 10,11,19,20,23,29,33,35,36,37,46 & RFI.SK.NO.7225-S,7226-S,7227-S ,7369-S

CHEST PISTOL AUTO 9MM 1A (TO HOLD 20 PISTOLS ) TO DRG.NO. CQA(SA) SK-605 (LATEST DC-26041-SA DT.26-2-05) FOR PISTOL AUTO 9MM 1A.

CHEST PISTOL AUTO 9MM 1A (TO HOLD 20 PISTOLS ) TO DRG.NO. CQA(SA) SK-605 (LATEST DC-26041-SA DT.26-2-05) FOR PISTOL AUTO 9MM 1A.

TO DRG.NO. CQA(SA) SK-605 (LATEST DC-26041-SA DT.26-2-05)

As per TE

As per TE

As per TE

As per TE

As per TE

As per TE

As per appendix 'H' of Specification No. IAFS 1042:2017

As per appendix 'H' of Specification No. IAFS 1042:2017

As per TE

As per TE

As per TE

As per TE

As per TE

As per TE

As per TE

As per TE

As per TE

As per TE, Used in Tent

As per TE

As per TE

As per TE

As per TE

As per TE

OCFS/Yarn Wool Polyamide(80:20) 240 Tex OG/2012

OCFS/Yarn Wool Polyamide(80:20) 240 Tex OG/2012

No. "OCFS/YARN WOOL POLY AMIDE (80:20) 240 TEX OG/2012" Except that Shade of the Yarn Shall be as per Pantone No. 19-3933 TPX & Annx-I

No. "OCFS/YARN WOOL POLY AMIDE (80:20) 240 TEX OG/2012" Except that Shade of the Yarn Shall be as per Pantone No. 19-3933 TPX & Annx-I

FASTENER PLASTIC SLIDE HEAVY DUTY O.G.61CM LONG (CLOSED END ONE WAY WITH NON LOCK SLIDER)

IS:14181 (LATEST).

PLASTIC SLIDE FASTENER SPECIAL PURPOSE HEAVY DUTY TWO WAY END TYPE 'F' DOUBLE PULLER NON LOCK SILDER OG 61 CM.

XX

SLIDE FASTENER PLASTIC HEAVY DUTY OG 40 CM LONG CLOSED END ONE WAY WITH SINGLE PULLER

XX

BOX FIBRE BOARD RIGID CORRUGATED DOUBLE WALL 5 PLY SIZE 420MM X 330MM X 375MM

IS:2771 (Part-1):1990 Reaffirmed 2002 will be followed for

BOX FIBRE BOARD RIGID CORRUGATED TRIPLE WALL 7 PLY SIZE 700X450X400 MM

AS PER REQUIREMENT & SPECIFICATION

Adhesive O.G Type A & with cross linking agent inproportinate quantity

IND/ENG./PROV/1193(a)

Polythene Bag 0.04mm Thick (Internally) 18" x 9- 1/2"

IS: 2508 (Latest)

Polythene Bag size 38cm Width x 72 cm Length x 0.04mm Thick

IS: 2508 (LATEST)

Polythene bag of film 0.075mm of size 55cm Width x 80cm Length

IS:2508 (Latest)

PLUG GAS CYLINDER ASSEMBLY-AS PER DRG. NO.TEND 1905* (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1 FOR DC NO.& SPECN. LATEST ISSUE SHOULD BE FOLLOWED

PLUG GAS CYLINDER ASSEMBLY-AS PER DRG. NO.TEND 1905* (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1 FOR DC NO.& SPECN. LATEST ISSUE SHOULD BE FOLLOWED

DRG. NO.TEND 1905* (ICR-66 SA)

• AS PER DRAWING

• INSPECTION WILL BE CARRIED OUT AFTER RECEIPT OF MATERIAL AT OFT BY GM OR HIS AUTHORIZED REPRESENTATIVE

BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028, 1005-005449,5305-005009,1005-004027,TEND 1911 REF.NEW DC

BUTT NORMAL ASSEMBLY (PLASTIC) WITH PLATE BUTT ASSEMBLY TO D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028, 1005-005449,5305-005009,1005-004027,TEND 1911 REF.NEW DC

D.S. CAT NO.1005-004025, D.C. NO.26416-SA, DATED 09.05.2008 WITH DETAILS OF LATEST ISSUE D.S. CAT NOS.5305-005010, 5340-015297,5340-016097,1005-001664,1005-004026,1005-004028, 1005-005449,5305-005009,1005-004027,TEND 1911 REF.NEW DC

• As per Drawing

• As per Drawing

CASE CARRYING TO DRG. NO. MCT-1463/1.FOR SIGHT 51MM MORTAR.

CASE CARRYING TO DRG. NO. MCT-1463/1.FOR SIGHT 51MM MORTAR.

MCT-1463/1.

NETTING MOSQUITO ROUND MESH HDPE O.G. 122 CMS.

IS:10054(LATEST).

PROV/OCFV/Fabric/004

PROV/OCFV/Fabric/004

IS-177-1989 reaffermed 1997

IS-177-1989 reaffermed 1997

IS:177

IS:177

OCFAv/Fabric/001(a)

OCFAv/Fabric/001(a)

WEBBING NYLON 51 MM UNDYED BS=480 KGS.

SPECIFICATION NO.: ADRDE/Specn/1983/11(b) 50mtr. for Roll Length Ex.cluding sampling.

DRAWING NO. : ADRDE/269(c)

DRAWING NO. : ADRDE/269(c)

TAPE TEXTILE NYLON 43 MM U/D (BS=9000 N)

SPECIFICATION NO. ADRDE/SPECN/1985/27(b) Except that : – Twist (TPM) yarn as per clause No. 4.1 only Roll length 55 mtr. Excluding sampling.

ADRDE/SPECN/1985/27(b)

• As per Specification/Drawing

• As per Specification/Drawing

CORD NYLON BRAIDED 2452-N / 250 KGS

SPECIFICATION NO. : JSS-4020-8

FABRIC NYLON LIGHT WEIGHT 37 GMS UNDYED 94 CMS FOR P.P.

SPECIFICATION NO. : IS : 4726-1984 and to the following exceptions :- (i) The breaking strength shall be carried out by revelled strip method after conditioning the test specimen at 65 + 2% RH & 27 + 2 C for 24 Hrs. No individual reading for breaking strength test for warp and weft shall be less than the value shown in ISI specn. NO.IS:4726-84. (ii) 100 % Sampling/Testing/Inspection shall be resorted (iii)Roll length shall be 80 M or above.(iv) A Flag allowance of 50 cm for each major defect flagged except for continuous defect which shall be given a one meter allowance for each meter in which defect occurs

SPECN-IS:4741-1965(Amdt-1.Reafirmed 2003) except for pull strength, which should be 4Kgf(Min). For Plastic Washer Thickness (under pressure 200g/cm squire) 1.14mm & Dia12.52 mm of best trade quality

IS:4741-1965(Amdt-1.Reafirmed 2003) except for pull strength, which should be 4Kgf(Min). For Plastic Washer Thickness (under pressure 200g/cm squire) 1.14mm & Dia12.52 mm of best trade quality

chrome tanned black buff din apollo leather embassed full grain leather, thickness 2+0.2mm

as per requirement

soft plain leather thickness 1+0.2mm

as per requirement

DRG.NO.: ADRDE/1359(a) DRD/25/98.

DRG.NO.: ADRDE/1359(a) DRD/25/98.

SPECN/DRG.NO: ADRDE/302(c).

SPECN/DRG.NO: ADRDE/302(c).

ADRDE/302(c).

SPECN-ADRDE/271(b) NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.

SPECN-ADRDE/271(b) NOTE-FIRM SHOULD ENGRAVE MCS ON THE COIL SPRING CROWN WITH OTHER ENGRAVINGS.

DRAWING ADRDE/271(b)