DUCK NYLON 230 GM STEEL GREY 91.4 CM WIDTH

SPECN.NO.ADRDE/SPECN./1984/23(d)

• As per Specification/Drawing

• As per Specification/Drawing

FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE U/D 95 CM

SPECN. NO. : ADRDE/SPECN/1983/14

FABRIC COTTON GREY MERCERISED WIDTH 94 CM

AS PER PARTICULAR =WIDTH=94 CM A.P.35+_5 Cuft/Sqft/Sec at 10"WHP Weight/Sq.Metre=115-117 Gram Thread /cm-Warp-28,WEft-25 Tex of Yarn Tex x Fold-Warp-9.4x2,Weft-9.5x2 B.S.in Kg-Warp-53kg(min) Weft-53kg(min.) Weave-Plain Finish-Grey Merecerised

FABRIC COTTON SCOURED 68 GM UNDYED

SPECN NO. CIADE/19(a).

• As per Specification/drawing

• As per Specification/drawing

FABRIC RAYON ORANGE 107 CM

SPECN-ADRDE/SPECN/1983/16

FABRIC NYLON 180 GM 94 CM U/D

1- LENGTH/ROLL -------- 100 M-----------------IS:1954 2-MASS/SQ.MTR.GM.------180+ -3----------------IS:1964 3-WIDTH CM(MIN) ------94 -----------------IS:1954 4-AIR POROSITY(CU.FT./SQ.FT/SEC)---3-6--------IS:4726 5-BREAKING LOAD KGF MIN.WARP-------230--------IS:1969 WEFT-------220--------IS:1969 6-THICKNESS,MM(UNDER /CM SQ.PRESSURE)----0.32 MAX 7-NO.OF THREADS/CM WARP---24/25 & WEFT---22/23--IS:1963 8-TEX OF YARN, WARP---17.5 X 2 &WEFT---17.5 X 2--IS:3442 9-% ELONGATION--------25 MIN.------------------IS:1969 10-WEAVE ----------VISUAL

FABRIC NYLON 52 GMS UNDYED 91.4 CMS.

SPECIFICATON NO.:-ADRDE/SPECN/1988/32

FARIC NYLON 48 +-2 GM U/D TWILL WEAVE 92 CM

SPECIFICATION : ADRDE/SPECN/2002/56(b)

FABRIC NYLON 48 +-2 GM ORANGE TWILL WEAVE 92 CM

SPECIFICATION:- ADRDE/SPECN/2002/56(b)(VARIETY NO.-1)

FAB.NYL.66,93 GM.U/DWIDTH 101+-1 CM.(EXCLUDING SELVEDGE)

SPECN-ADRDE/SPECN/2000/53(b)

FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS.

SPECIFICATION NO. : ADRDE/SPECN/1982/7(c) sampling Sampling Plan & criteria for conformity as per ADRDE/SPECN/I.P.S.

FABRIC NYLON 185 GM UNDYED 92 CM .

SPECIFICATION NO.: ADRDE/SPECN/1993/43

FABRIC NYLON 105 GM UNDYED 110 CM

SPECIFICATION NO. : ADRDE/SPECN/1993/42

CANVAS NYLON 220 GM. 91.4 CMS. UNDYED

SPECIFICATION NO.: JSS 8305 - 38 : 2015

FABRIC NYLON FOR PARACHUTES TYPE SM 91.4 cms.

SPECIFICATION NO.: ADRDE/QMS/TDTM/SPECN/97

FABRIC COTTON CLOSELY WOVEN 235 GMS O.G. 91.4 CMS.

SPECIFICATION NO. : JSS-8305-5 (V.NO.B).

FABRIC NYLON ORANGE 37 GM 94 cm WIDTH

SPECN NO.IS:4726-1984

FABRIC NYLON 93GM U/D WIDTH 95 CM

ADRDE/SPECN/2000/53(c)

• As Per Specification/Drawing

• As Per Specification/Drawing

COTTON PADDING 37 CM x 1.5 MM THICK

SPECIFICATION NO. : AS PER APPROVED SAMPLE.

COTTON CANVAS 545 GR. O.G. 91.4 CM UNPROOFED VARIETY NO.3

SPCN. IS:1424-1970.

CANVAS NYLON 220g 91.4 cm OG

SPCN: IND/ADE/0065(a).

FABRIC NYLON 58g ORANGE

SPECN NO.:CIT&C/TC-8/99

FABRIC NYLON 109g U/D 91.4cm

SPECN. NO.: ADRDE/SPECN/1985/28(c).

DUCK COTTON 475 GMS O.G. UNPROOFED 91.4 CMS FOR AERONAUTICAL PURPOSE

SPECIFICATION NO. : IS : 1422-1983.

Cloth Cotton Closely Woven 170 Grams Scoured 91.4 Cms, (Variety No. A)

Specn. No. : JSS-8305-05:2020 (Fourth Revision) (a) Sampling Plan & Criteria for conformity as per CQAT&C/QA1/TC-11/12.

• As per Specification/Drawing

• As per Specification/Drawing

FABRIC NYLON 66, 93g U/D 120 Cm.

ADRDE/SPECN/2000/53(c)

• As per Drawing / Specification

• As per Drawing / Specification

FABRIC NY. 109GM ORANGE 120 CM WIDTH

SPECIFICATION NO.:ADRDE/SPECN/1985/28(C) SHADENO. 592 AS PER BS: 381-1964 AS.

FABRIC COTTON MERCERISED 140 G U/D 136_+4CM.

SPECN. NO. IS:514.GRADE -1.

FABRIC NYLON LOW POROSITY 52 GM,RIP STOP WEAVE ORANGE 94 CM

SECIFICATION NO. : ADRDE/SPECN/1983/14 (a)

• As per Specification/Drawing

• As per Specification/Drawing

FABRIC NYLON LT. WT. 37g RIP STOP WEAVE OLIVE DRAB. SHADE NO 298 (AS PER SPECN. NO IS:5-1994), 94 CM. WIDTH

SPECIFICATION NO. IS:4726-1984. EXCEPT THAT:- i) page 4, clause 2.2.1, third line has been deleted from IS. ii) page 7, table 1, note 2 has been amended as given FOR:- 210 g/sq.cm READ:- 200 g/sq.cm

• As per Specification/drawing

• As per Specification/drawing

NETTING NYLON 3" SQUARE MESH

SPECN. :AS PER PARTICULARS Width: 37.5 cm (15 Inch). B.L. : 20 kg(MIN). Mesh Size : 7.5cm x7.5cm (3"SQUARE). Strength at joint : 30 kg(Min). Denier : 840. Weight/Mtr.:- Upto 25 grams.

Net Fabric Polyester 76 Gms. 20 Kgf BS For Width 120 cms +2 -0 cm excluding selvedge

SPEC NO. ADRDE/QMS/TDTM/F/2009/03(a), DT. 17-05-2021.

• As per Specification/Drawing

• As per Specification/Drawing

DUCK NYLON 230 GM O.G. 91.4 CMS.

ADRDE/SPECN/1984/23(d).

• As per Specification/Drawing

• As per Specification/Drawing

FABRIC NYLON 370 gm. AIR TEXTURE, DISRUPTIVE PRINTED, PU COATED INSIDE AS PER PARTICULARS

SPECN-ADRDE/specn/75(a) & SHADE AS PER SAMPLE RECEIVED FROM ADRDE VIDE LETTER NO. ADRDE/QMS/PG/PAS/CFF/319/P dtd.06-06-12

• As per Specification/drawing

• As per Specification/drawing

FABRIC COTTON CW 310g OG 91.4 CM.

JSS: 8305-05

FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE OLIVE DRABSHADE NO.298 AS PER SPECN NO.IS:5, 94 CMS SPECN NO ADRDE/SPECN/1983/14-OPF KANPUR

SPECN NO ADRDE/SPECN/1983/14

FABRIC NYLON LT. WT. 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO 298 ASPER IS:SPECN NO.IS:5-1994 122 CM WIDTH

SPECN. NO. IS:4726-1984 Except that :-(i) Page 4, Clause 2.2.1, third line has been deleted from IS. (ii) Page 7, Table 1, Note 2 has been amended as given For - 210 g/cm2 Read-200 g/cm2

• As Per Specification/Drawing

• As Per Specification/Drawing

FABRIC COTTON 375 GMS. OG WATER REPELLANT 135 CM WIDTH (FOR AERONAUTICAL PURPOSE) specification

Specn. No. :- IS:2422-1985.Dye fastness to light may be obtained by Carbon Arc Method also in case Xenon Arc is not available. (a) In appearance shade finish and all other respects not defined in this specification,the material shall conform to the corresponding to sealed pattern held in the custody of the Controller, CQA(T&C), Kanpur. (b) Sampling Plan as per Annexure I attached.

BLENDED FABRIC POLYESTER & COTTON (67:33) 93+2-0 CM WIDTH

TYPE 2 OF IS 2970-1987 (RE AFFIRMED 2004) FIRST REVISION EXCEPT TECHNICAL PARTICULARS AS PER ANNEXURE ENCLOSED.

IS:187-1978 (V.NO. 1) WITH AMENDMENT NO. 1 & 2 OF 1986

IS:187-1978 (V.NO. 1) WITH AMENDMENT NO. 1 & 2 OF 1986

SUPPLY OF FRONT SIGHT BLOCK AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL

AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL

K 1207

IMPACT PROTECTION RIGHT TO DRG. NO 304052778 DC NO-19311-W DATED 02.03.2013 WITH ACCESSORIES I E INCLUDING CLEANING SACHET, STRAP & DOUBLE SIDED ADHESIVE DRG, NO- F- 1303-028990-A

AS PER DRAWING

304052778

• AS PER ATTACHMENT

• AS PER ATTACHMENT

MAGAZINE BOX AK 630 ASSY. 01

AS PER REQUIRED DRG.

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STEEL ROD DIA 55 MM X L1250 TO SPECN. OST 3-98-80 GRADE OF STEEL 30KHRA

AS PER SPECIFICATION

• AS PER ATTACHMENT

• AS PER ATTACHMENT

REFLECTOR TO DRG. NO. AK-630 111-301A IN FINISHED CONDITION

AS PER DRAWING

AK-630 111-301A

AIR MANOMETER MVU-100 (REQD. FOR DRG. NO AK-630M SB02.

AS PER DRG. AND SPECIFICATION

FABRICATION OF GAS BLOCK TO DRG. NO. AO-18.01.020 SB MAKE; AS PER SPECIFICATION & DRAWING

AS PER DRAWING

• AS PER ATTACHMENT

• AS PER ATTACHMENT

AS PER DRG. AND SPECN

AS PER DRG. AND SPECN

BUSH TO DRG NO 9-A-621.05.016

AS PER DRAWING

9-A-621.05.016

• as per attachment

• as per attachment

HARD CHROMIUM PLATING ON BARREL FOR AK-630 GUN TO DRG. NO AO-18.01.018

AS PER DRAWING

AO-18.01.018

MESH TO DRG. NO. AK-630 SB 117-7 IN F/C

AS PER DRAWING

AK- 630 SB 117-7

BUFFER SPRING TO DRG. NO:AO-18.00.007

BUFFER SPRING TO DRG. NO:AO-18.00.007

• AS PER ATTACHMENT

• AS PER ATTACHMENT

STEEL BAR 60MM DIA TO SPECIFICATION TU-14-1-1637-76 TO GRADE : BAR OF ALLOY KHISK60V14N11 (EP131)

AS PER SPECIFICATION

• AS PER ATTACHMENT

• AS PER ATTACHMENT

GAS BLOCK TO DRG. NO. AO-18.01.020 IN F/C

AS PER DRAWING

CONTACTOR ASSY. TO DRG.NO.9-A-621.08.000 SB IN F/C

CONTACTOR ASSY. TO DRG.NO.9-A-621.08.000 SB IN F/C

• AS PER ATTACHMENT

• AS PER ATTACHMENT

Fabrication of Shutter ring to Drg.no.A.O.18.01.028 (HEAT TREATMENT OPN. TO FINISH DRG. NO. AO-18.01.028 AND PROCESS SCHEDULE SL. FROM 030 TO END ) OF AO-18 STORE

AS PER DRAWING

Drg.no.A.O.18.01.028

VALVE TO DRG.NO.A.O.18.03.010 IN FINISHED CONDITION

AS PER DRAWING

.A.O.18.03.010

• as per attachment

• as per attachment

Link for AO-18/AK-630 Drg. no.3-AO-18.001. AS PER TECH. SPECN: NO. 3-AO-18.001-TY/NASK-835 (PROV.)

AS PER DRAWING

NASK-835

• AS PER ATTACHMENT

• AS PER ATTACHMENT

HOSE VG (111)-10-31, 5-47-T GOST 18698-79 (REQ. FOR DRG. NO. AK-630 SB 108) IN FINISHED CONDITION (1 NO.= 7.5 MTR)

AS PER SPECIFICATION

FIXTURE FOR CONNECTING STRIP/BAND TO AK 630 YU SB8

FIXTURE FOR CONNECTING STRIP/BAND TO AK 630 YU SB8

WINCH TO DRG.NO.AK-630 Yu SB-3

WINCH TO DRG.NO.AK-630 Yu SB-3

• as per attachment

• as per attachment

HOIST TO DRG. NO. AK-630-YU SB1 SB

HOIST TO DRG. NO. AK-630-YU SB1 SB

BELT FILLING MACHINE AO.18N.000

BELT FILLING MACHINE AO.18N.000

• AS PER ATTACHMENT

• AS PER ATTACHMENT

FIXTURE AO.18P.000

FIXTURE AO.18P.000

• as per attachment

• as per attachment

PLATE TO DRG. NO. AK-630 SB 171/50-71 IN FINISHED CONDITION

PLATE TO DRG. NO. AK-630 SB 171/50-71 IN FINISHED CONDITION

ELECTRIC AIR VALVE 3K-48

ELECTRIC AIR VALVE 3K-48 (REQ. FOR DRG. NO. SB114)

• as per attachment

• as per attachment

MACHINING OF 1 SET OF RACE RING CONSIST OF LOWER RING TO DRG. AK-630 119-1, UPPER RING TO DRG. AK-630 119-2, INTERNAL RING TO DRG. AK-630 119-25 FROM A SET OF FORGINGS CONSISTS OF FORGING OF LOWER RING TO DRG. AK-630 119-1, FORGING OF UPPER RING TO DRG. AK-630 119-2, FORGING OF INTERNAL RING TO DRG. AK-630 119-25.

AS PER DRG. & SPECIFICATION

SET OF FORGING REQUIRED FOR RACE RING CONSISTS OF : (A) FORGING OF LOWER RING TO DRG. NO. AK-630 119-1 (B) FORGING OF UPPER RING TO DRG. NO. AK-630 119-2, (C) FORGING OF INTERNAL RING TO DRG. NO. AK-630 119-25. MAT. SPECIFICATION : GRADE X 2CR13 TO IS 6911-92 (AS PER CQA(MET)).

AS PER DRG. & SPECIFICATION

AS PER DRG. & SPECIFICATION

AS PER DRG. & SPECIFICATION

BOX FOR GUN MOUNT AK-630 M WITHOUT AO-18. DRG, NO. AK-630M YA SB 200-1 TR & 200-14 TR

AS PER DRG. AND SPECN.

• AS PER ATTACHMENT

• AS PER ATTACHMENT

30MM SIX BARREL AUTOMATIC GUN AO-18 AO-18.00.000

AS PER DRAWING OR SPECIFICATION

STEEL CASTING FOR ARC TO STONE DRG. NO. 301474

AS PER DRAWING

GEAR CUTTING OF ARC TO DRG. NO- 3014739

AS PER DRAWING

SPRING IN FINISHED CONDITION TO DRG. NO. BOF-5044601

SPRING IN FINISHED CONDITION TO DRG. NO. BOF-5044601

• AS PER ATTACHMENT

• AS PER ATTACHMENT

HORIZONTAL PAD AK-630 ASSY 120

HORIZONTAL PAD AK-630 ASSY 120

SPIGOT TO DS. CAT. NO. 1005-001756 IN FINISHED CONDITION

SPIGOT TO DS. CAT. NO. 1005-001756 IN FINISHED CONDITION

DRUM ASSY. AK-630 SB 118 SB

AS PER DRAWING

• AS PER ATTACHMENT

• AS PER ATTACHMENT

Packing Box Drg. No. CO-427B

Packing Box Drg. No. CO-427

• AS PER ATTACHMENT

• AS PER ATTACHMENT

COOLING TANK TO DRG NO SB 117/50 WITHOUT PUMP VK-524 A-T2, ELECTRIC MOTOR DM 132 SV- 40 M5 380 V, 55 KW AND CONNECTOR COUPLING H 48547 H 48 54714000-17 WITH PUMP UNIT AK-630 Assy. 117/50 SB

As per Drawing

• as per attachment

• as per attachment

WOODEN PACKING BOX (TRANSIT) TO DRG. NO. CO-445A F/C

AS PER DRAWING

• AS PER ATTACHMENT

• AS PER ATTACHMENT