SPECIFICATION :-JSS 8315-6

SPECIFICATION :-JSS 8315-6

SPECIFICATION:IND/ADE/0061

SPECIFICATION:IND/ADE/0061

SPECIFICATION NO. : IS:4228-1979

SPECIFICATION NO. : IS:4228-1979

SPECN.NO. IND/ADE/0069 (c).

SPECN.NO. IND/ADE/0069 (c).

SPECN.NO.: IS : 3255-1979 EXCEPT THAT :- i) In appearance shade finish and in other respect not defined in this Specn. the material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, Kanpur. ii) There shall be no presence of starch. iii) Loss of scouring mild method is to be followed in lieu of severe Method and shall not exceed 2%. iv) Sampling plan & criteria for conformity and Packing & Marking :- as per CQAT&C/QAI/TC-8/11(b).

SPECN.NO.: IS : 3255-1979 EXCEPT THAT :- i) In appearance shade finish and in other respect not defined in this Specn. the material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, Kanpur. ii) There shall be no presence of starch. iii) Loss of scouring mild method is to be followed in lieu of severe Method and shall not exceed 2%. iv) Sampling plan & criteria for conformity and Packing & Marking :- as per CQAT&C/QAI/TC-8/11(b).

SPECIFICATION NO. : IS : 8156:1994

SPECIFICATION NO. : IS : 8156:1994

SPECIFICATION NO. : IS : 8156:1994

SPECIFICATION NO. : IS : 8156:1994

SPECN NO.AS PER PARTICULARS WIDTH -30MM THICKNESS -2.10 +-0.02MM WEIGHT/M -36.1grm NOs OF ENDS -240 TEXT OF YARNS-38.4X3 WEAVE -BRAIDED

SPECN NO.AS PER PARTICULARS WIDTH -30MM THICKNESS -2.10 +-0.02MM WEIGHT/M -36.1grm NOs OF ENDS -240 TEXT OF YARNS-38.4X3 WEAVE -BRAIDED

SPECIFICATION :-WIDTH -26MM. THICKNESS-0.58+-.01 MM WT./MTR.-6.6 GM NO.OF ENDS-178+1 INTERLOCKING PICKS/CM-26 TEX OF YARN:- WARP-15.6,WEFT-16.5X2,BS.1050N

SPECIFICATION :-WIDTH -26MM. THICKNESS-0.58+-.01 MM WT./MTR.-6.6 GM NO.OF ENDS-178+1 INTERLOCKING PICKS/CM-26 TEX OF YARN:- WARP-15.6,WEFT-16.5X2,BS.1050N

SPECIFICATION:- WDTH-20MM ,THICKNESS-1.92+.02MM -.01MM WEGHT/MTR.-20.5 GM (MAX.) NO. OF ENDS-132,TEX OF YARN-38.5X3 BS. -5680N , WEAVE-BRAIDED

SPECIFICATION:- WDTH-20MM ,THICKNESS-1.92+.02MM -.01MM WEGHT/MTR.-20.5 GM (MAX.) NO. OF ENDS-132,TEX OF YARN-38.5X3 BS. -5680N , WEAVE-BRAIDED

SPECIFICATION:-WIDTH-30MM THICKNESS-0.40+ - 0.02MM WEIGHT/MTR-5.3GM (MAX.) NO.OF ENDS-87 PICKS/CM -16 TEX OF YARNS -WARP- 17.8X2 WEFT- 17.8X2 BREAKING STRENGTH-340 N (MIN.)

SPECIFICATION:-WIDTH-30MM THICKNESS-0.40+ - 0.02MM WEIGHT/MTR-5.3GM (MAX.) NO.OF ENDS-87 PICKS/CM -16 TEX OF YARNS -WARP- 17.8X2 WEFT- 17.8X2 BREAKING STRENGTH-340 N (MIN.)

SPECIFICATION NO.: BS=17650 N (1800 KG MIN.) WIDTH 25.4 + 0.4 MM THICKNESS 2.3+ 0.3 MM WT. PER MTR.IN GRM 40 MAX.

SPECIFICATION NO.: BS=17650 N (1800 KG MIN.) WIDTH 25.4 + 0.4 MM THICKNESS 2.3+ 0.3 MM WT. PER MTR.IN GRM 40 MAX.

SPECN. NO.IS:4228- 1968.

SPECN. NO.IS:4228- 1968.

SPECN NO.:-IS:4228-1968

SPECN NO.:-IS:4228-1968

SPECN. NO.ADDE/SPECN/1992/38.

SPECN. NO.ADDE/SPECN/1992/38.

SPECN-NO:-IS:8156-1981.

SPECN-NO:-IS:8156-1981.

SPECN NO.IS:8156-1981

SPECN NO.IS:8156-1981

SPECN.NO.IS:8156-1981

SPECN.NO.IS:8156-1981

SPECIFICATION :- WIDTH---------------------13 MM +/-1 WEIGHT/MRT.IN GMS.--------4.8 GMS.MAX. B.S. IN NEWTON------------1800-N MIN. THICKNESS 500 GMS/CM.SQR.--0.51 MM +/-0.2 TEX OF YARN---WARP----52, WEFT------23.9. NO.OF ENDS----------------72. PICKS/CM------------------14. WEAVE---------------------2/2 POINTED TWILL WEAVE.

SPECIFICATION :- WIDTH---------------------13 MM +/-1 WEIGHT/MRT.IN GMS.--------4.8 GMS.MAX. B.S. IN NEWTON------------1800-N MIN. THICKNESS 500 GMS/CM.SQR.--0.51 MM +/-0.2 TEX OF YARN---WARP----52, WEFT------23.9. NO.OF ENDS----------------72. PICKS/CM------------------14. WEAVE---------------------2/2 POINTED TWILL WEAVE.

SPECIFICATION :- WIDTH-------------------------13.5 MM +/-1 WEIGHT/MTR. IN Gms.-----------10.3 gms (MAX) B.S.IN NEWTON-----------------3200-N (MIN) THICKNESS 500 gms./CM.SQR.----1.03 MM (MAX) TEX OF YARN----WARP--110 (FACE + BACK),WEFT--120.60 AND BINDER--25.30 NO.OF ENDS--------63 (FACE + BACK)+ 7 BINDER PICKS/CM----------12/13 (BOTH LAYER) WEAVE-------------DOUBLE PLAIN.

SPECIFICATION :- WIDTH-------------------------13.5 MM +/-1 WEIGHT/MTR. IN Gms.-----------10.3 gms (MAX) B.S.IN NEWTON-----------------3200-N (MIN) THICKNESS 500 gms./CM.SQR.----1.03 MM (MAX) TEX OF YARN----WARP--110 (FACE + BACK),WEFT--120.60 AND BINDER--25.30 NO.OF ENDS--------63 (FACE + BACK)+ 7 BINDER PICKS/CM----------12/13 (BOTH LAYER) WEAVE-------------DOUBLE PLAIN.

SPCN. NO. ADRDE/SPECN/1981/6

SPCN. NO. ADRDE/SPECN/1981/6

SPECIFICATION NO. : IS : 8156-1981

SPECIFICATION NO. : IS : 8156-1981

SPECIFICATION NO. : IS : 8156-1981

SPECIFICATION NO. : IS : 8156-1981

SPECIFICATION IS : 8156 OF 1981.

SPECIFICATION IS : 8156 OF 1981.

SPECIFICATION IS : 8156 - 1981.

SPECIFICATION IS : 8156 - 1981.

SPCN.NO. IS:4228-1967.

SPCN.NO. IS:4228-1967.

SPCN.NO.IND/ADE/0072.

SPCN.NO.IND/ADE/0072.

SPECN.NO.IS:4228-1968.

SPECN.NO.IS:4228-1968.

SPECCCN. NO. ADDE/BP/1 (b) ROLL LENGTH 100 MTR. EXCLUDING SAMPLING

SPECCCN. NO. ADDE/BP/1 (b) ROLL LENGTH 100 MTR. EXCLUDING SAMPLING

TIMBER SISSOO HARD WOOD(NON CONIFEROUS) SCANTLING GR. I SIZE 150 MM X 300 MM X 762 MM FOR 4 NOS FINISHED COMPONENTS

AS PER REQUIREMENT AND SPECIFICATION

THREAD SEWING SPUN POLYESTER OG 125 D-TEX/3

IS: 9543 - 1980 (REAFFIRMED : 2010)

STEEL FLAT ANNEALED COND.

STEEL FLAT ANNEALED COND.

STEEL RD. 32MM DIA.(+0.1-0.00) PEELED BAR IN EXACT LENGTH OF800MM (+5MM-0.00MM) EACH PIECE, TO SPECN. BS-970. PT-I:1983,GD-835,M-15(EN-39B),VACUUM DEGASSED & ELEMENTS AL-0.04% MAX.V - 0.05% MAX.,W - 0.03% MAX.

STEEL RD. 32MM DIA.(+0.1-0.00) PEELED BAR IN EXACT LENGTH OF800MM (+5MM-0.00MM) EACH PIECE, TO SPECN. BS-970. PT-I:1983,GD-835,M-15(EN-39B),VACUUM DEGASSED & ELEMENTS AL-0.04% MAX.V - 0.05% MAX.,W - 0.03% MAX.

STEEL RD. 42MM DIA. FOR P/EXTN

STEEL RD. 42MM DIA. FOR P/EXTN

STEEL SQUARE 36X36MM (ROUND CORNER 0.5MM MAX.)X 600MM LONG (+3MM/-0MM) HOT ROLLED TO SPECN. BS970 PT-1, 1983, GRD.709 M-40 (EN-19) PERPENDICULARITY SHOULD BE LIMITED TO 0.5MM ON EACH PARTED FACE. MATERIAL TO BE SUPPLIED IN 'T' CONDITION WITH HARDNESS RANGE 250-280 HB (MAX.)

STEEL SQUARE 36X36MM (ROUND CORNER 0.5MM MAX.)X 600MM LONG (+3MM/-0MM) HOT ROLLED TO SPECN. BS970 PT-1, 1983, GRD.709 M-40 (EN-19) PERPENDICULARITY SHOULD BE LIMITED TO 0.5MM ON EACH PARTED FACE. MATERIAL TO BE SUPPLIED IN 'T' CONDITION WITH HARDNESS RANGE 250-280 HB (MAX.)

STEEL ROD 32MM(-0.5) DIA.

STEEL ROD 32MM(-0.5) DIA.

STEEL ROD 25MM DIA.(+0.3MM-0.0MM)TO SPCN.BS970 PT-I,1983,GRD709 M-40(EN-19)IN HR.,ANNEALED & PEELED COND IN EXACT LENGTHOF 442MM(+5MM-0.0MM)EACH PIECE,STRAIGHTNES 0.3MM OVER LENGTHVACUUM DEGASSED.MATERIAL REQUIRED FOR CYLINDER GAS TO DRG.NO1005-560066(LT.DC-25824-SA).FOR RIFLE 5.56MM.INSAS

STEEL ROD 25MM DIA.(+0.3MM-0.0MM)TO SPCN.BS970 PT-I,1983,GRD709 M-40(EN-19)IN HR.,ANNEALED & PEELED COND IN EXACT LENGTHOF 442MM(+5MM-0.0MM)EACH PIECE,STRAIGHTNES 0.3MM OVER LENGTHVACUUM DEGASSED.MATERIAL REQUIRED FOR CYLINDER GAS TO DRG.NO1005-560066(LT.DC-25824-SA).FOR RIFLE 5.56MM.INSAS

STEEL ROUND 38 MM DIA IS 5517-1978.40 CSR BS -970-709-M-40

STEEL ROUND 38 MM DIA IS 5517-1978.40 CSR BS -970-709-M-40

STEEL ROD 32 MM(+0.5MM-0 MM)DIA, TO SPECN.BS:970 PT-1:1983, GD-708 M-40'T'(EN-19A). V.D.IN HR.PEELED & ANNEALED COND. (240 HV.MAX).MAINTAINED S&P COMBINED=.022%MAX.(%S-.01MAX. & %P-.015 MAX.) TO LENGTH SIZE 490 MM (-1.0 MM)FOR BARREL. AS PER DRG NO.RFI SK-8746 FOR PAG-0058.(12 BORE MOD.PAG.)

STEEL ROD 32 MM(+0.5MM-0 MM)DIA, TO SPECN.BS:970 PT-1:1983, GD-708 M-40'T'(EN-19A). V.D.IN HR.PEELED & ANNEALED COND. (240 HV.MAX).MAINTAINED S&P COMBINED=.022%MAX.(%S-.01MAX. & %P-.015 MAX.) TO LENGTH SIZE 490 MM (-1.0 MM)FOR BARREL. AS PER DRG NO.RFI SK-8746 FOR PAG-0058.(12 BORE MOD.PAG.)

STEEL STRIP 1.8MM+_.06 X 270MM

STEEL STRIP 1.8MM+_.06 X 270MM

STEEL STRIP,1MM THICK X90X2M.L STEEL STRIP 1MM THICK +_.035X 90MM +_.15X2MTS.OR MULTIPLE OF285MM.TO SPECN.BS:1449,PT-I:1983,CS-30(SILICON KILLED)BRIGHT/COLD ROLLED ANNEALED COND. ALT.MATL.BS:1449,PT-I:1983,SEC-4CONDN'A'GRADE-CS-40(SILICON KILLED)'C'RESTRICTED TO 0.4%(MAXSPHERODISED ANNEALED CONDN.TO 155 HV MAX.TMSL-11 ACCEPTABLE.

STEEL STRIP,1MM THICK X90X2M.L STEEL STRIP 1MM THICK +_.035X 90MM +_.15X2MTS.OR MULTIPLE OF285MM.TO SPECN.BS:1449,PT-I:1983,CS-30(SILICON KILLED)BRIGHT/COLD ROLLED ANNEALED COND. ALT.MATL.BS:1449,PT-I:1983,SEC-4CONDN'A'GRADE-CS-40(SILICON KILLED)'C'RESTRICTED TO 0.4%(MAXSPHERODISED ANNEALED CONDN.TO 155 HV MAX.TMSL-11 ACCEPTABLE.

MFR 47 KOHM +/-1% 0.25W 50PPM (LF 9001120528)

MFR 47 KOHM +/-1% 0.25W 50PPM (LF 9001120528)

MFR 4.3 KOHM +-1% 0.25W 50PPM (LF 9001120500)

MFR 4.3 KOHM +-1% 0.25W 50PPM (LF 9001120500)

MFR 3K3 OHM, +1% , 0.25W, 50PPM (LF 9001120624)

MFR 3K3 OHM, +1% , 0.25W, 50PPM (LF 9001120624)

MFR 390 OHM +/-1% , 0.25W, (LF 9001120696)

MFR 390 OHM +/-1% , 0.25W, (LF 9001120696)

MFR 18K OHM, +/-1% 0.25W 50PPM (LF 9001120593)

MFR 18K OHM, +/-1% 0.25W 50PPM (LF 9001120593)

RESISTOR SP3-39 NA-10 KOHM OZHO.468.377 TY (LF 7441121993).

RESISTOR SP3-39 NA-10 KOHM OZHO.468.377 TY (LF 7441121993).

RESISTOR SP3-39 NA-1.5 KOHM OZHO.468.377 TY (LF 7441121992).

RESISTOR SP3-39 NA-1.5 KOHM OZHO.468.377 TY (LF 7441121992).

RESISTOR SP3-39 A-680 OHM OZHO.468.377 TY (LF 7441121991).

RESISTOR SP3-39 A-680 OHM OZHO.468.377 TY (LF 7441121991).

RESISTOR S2-36-11.3 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121990).

RESISTOR S2-36-11.3 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121990).

RESISTOR S2-36-9.53 OHM+/-0.5 OZHO.467.089 TY (LF 7441121989).

RESISTOR S2-36-9.53 OHM+/-0.5 OZHO.467.089 TY (LF 7441121989).

RESISTOR S2-36-9.53 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121988).

RESISTOR S2-36-9.53 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121988).

RESISTOR S2-36-64.2 KOHM+/-0.5% OZHO.467.089 TY (LF 7441121987).

RESISTOR S2-36-64.2 KOHM+/-0.5% OZHO.467.089 TY (LF 7441121987).

RESISTOR S2-36-60.4 KOHM+/-0.5% OZHO.467.089 TY (LF 7441121986).

RESISTOR S2-36-60.4 KOHM+/-0.5% OZHO.467.089 TY (LF 7441121986).

RESISTOR S2-36-51.1 OHM+/-0.5% OZHO.467.089 TY (LF 7441121985).

RESISTOR S2-36-51.1 OHM+/-0.5% OZHO.467.089 TY (LF 7441121985).

RESISTOR S2-36-5.23 KOHM+/-.5 OZHO.467.089 TY (LF 7441121983).

RESISTOR S2-36-5.23 KOHM+/-.5 OZHO.467.089 TY (LF 7441121983).

RESISTOR S2-36-48.7 KOHM+/-.5% OZHO.467.089 TY (LF 7441121982).

RESISTOR S2-36-48.7 KOHM+/-.5% OZHO.467.089 TY (LF 7441121982).

RESISTOR S2-36-442 KOHM+/-0.5% OZHO.467.089 TY (LF 7441121981).

RESISTOR S2-36-442 KOHM+/-0.5% OZHO.467.089 TY (LF 7441121981).

RESISTOR S2-36-402 KOHM+/-0. OZHO.467.089 TY (LF 7441121980).

RESISTOR S2-36-402 KOHM+/-0. OZHO.467.089 TY (LF 7441121980).

RESISTOR S2-36-4.7 KOHM+/-0.5% OZHO.467.089 TY (LF 7441121979).

RESISTOR S2-36-4.7 KOHM+/-0.5% OZHO.467.089 TY (LF 7441121979).

RESISTOR S2-36-4.02 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121978).

RESISTOR S2-36-4.02 KOHM+/-0.5 OZHO.467.089 TY (LF 7441121978).

TRIGGER FORGING AS PER RFISK.NO.7057-S(LT.DC-NIL DT.15.10.01FOR RIFLE 5.56MM INSAS(WITH FIRM'S MATL)

TRIGGER FORGING AS PER RFISK.NO.7057-S(LT.DC-NIL DT.15.10.01FOR RIFLE 5.56MM INSAS(WITH FIRM'S MATL)

RFISK.NO.7057-S(LT.DC-NIL DT.15.10.01)

SLIDE FINISH TO DRG. NO. PS32-201 (FROM SLIDE FORGING TO FINISH THROUGH CONVERSION ROUTE) FOR 0.32" PISTOL.

SLIDE FINISH TO DRG. NO. PS32-201 (FROM SLIDE FORGING TO FINISH THROUGH CONVERSION ROUTE) FOR 0.32" PISTOL.

DRG. NO. PS32-201

INVESTMENT CASTING OF HOUSING SIGHT REAR TO RFI SK. NO. 6093*6. (LATEST DC. NIL DT.30/6/03) FOR RIFLE 5.56MM INSAS.

INVESTMENT CASTING OF HOUSING SIGHT REAR TO RFI SK. NO. 6093*6. (LATEST DC. NIL DT.30/6/03) FOR RIFLE 5.56MM INSAS.

RFI SK. NO. 6093*6. (LATEST DC. NIL DT.30/6/03)

INVESTMENT CASTING OF LEVER CHANGE TO RFI SK-4686*9 (LATEST DC. NIL DT.30/6/03) FOR RIFLE 5.56MM INSAS.

INVESTMENT CASTING OF LEVER CHANGE TO RFI SK-4686*9 (LATEST DC. NIL DT.30/6/03) FOR RIFLE 5.56MM INSAS.

RFI SK-4686*9 (LATEST DC. NIL DT.30/6/03)

INVESTMENT CASTING FOR CATCH SAFETY TO RFI. SK.. NO. 3571*3 FOR PISTOL AUTO 9MM 1A.

INVESTMENT CASTING FOR CATCH SAFETY TO RFI. SK.. NO. 3571*3 FOR PISTOL AUTO 9MM 1A.

RFI. SK.. NO. 3571*3

INVESTMENT CASTING OF BODY TO RFI SK NO. 6830/C*5 FOR PISTOL AUTO 9MM 1A.

INVESTMENT CASTING OF BODY TO RFI SK NO. 6830/C*5 FOR PISTOL AUTO 9MM 1A.

RFI SK NO. 6830/C*5

BLOCK REAR BLANK (MODIFIED) RIFLE 5.56MM INSAS FOLDING BUTT (STEEL).

BLOCK REAR BLANK (MODIFIED) RIFLE 5.56MM INSAS FOLDING BUTT (STEEL).

AS PER DRAWING

BUTT(PLASTIC),(D/BLUE) TO DS CAT NO.1005-560838(DC-26635-S) SPECN.NO.ARDE/SPECN/536(PROV). FOR RIFLE 5.56MM INSAS.

BUTT(PLASTIC),(D/BLUE) TO DS CAT NO.1005-560838(DC-26635-S) SPECN.NO.ARDE/SPECN/536(PROV). FOR RIFLE 5.56MM INSAS.

DS CAT NO.1005-560838(DC-26635-S)

CYLINDER GAS TO DSCAT NO.1005-560066(LATEST DC-25824-SA DT.29/07/03) FOR RIFLE 5.56MM INSAS

CYLINDER GAS TO DSCAT NO.1005-560066(LATEST DC-25824-SA DT.29/07/03) FOR RIFLE 5.56MM INSAS

DSCAT NO.1005-560066

REGULATOR GAS. TO D S CAT NO.1005-007746 (DC-26518-SA)FOR RIFLE 5.56MM.INSAS.(TP TO CONFORM 300-350 HV AFTER H & T.MACRO ETCH TEST AS PERASTME 381-84 WITH ACCEPTANCE STD.C2,R2,S2 FOR PLATE -I & NILFOR PLATE II).

REGULATOR GAS. TO D S CAT NO.1005-007746 (DC-26518-SA)FOR RIFLE 5.56MM.INSAS.(TP TO CONFORM 300-350 HV AFTER H & T.MACRO ETCH TEST AS PERASTME 381-84 WITH ACCEPTANCE STD.C2,R2,S2 FOR PLATE -I & NILFOR PLATE II).

D S CAT NO.1005-007746 (DC-26518-SA)

STOCK BUTT FOR 12 BORE MODIFIED PUMP ACTION GUNTO RFI DRG.NO. PAG-0070.[MAT.- NYLON-66 TO SPECN.DEF,STD 93-8/1][COLOUR- BLACK & LIGHT MATT FINISH]

STOCK BUTT FOR 12 BORE MODIFIED PUMP ACTION GUNTO RFI DRG.NO. PAG-0070.[MAT.- NYLON-66 TO SPECN.DEF,STD 93-8/1][COLOUR- BLACK & LIGHT MATT FINISH]

PAG-0070

TRIGGER(FINISH) TO DS.CAT NO 1005-003184 (DC-25575-SA) [MACROETCH TEST WILL BE AS PER COL.(D) OF SL.NO.1 OF CQA(SA)NOTE SHEET NO.1] FOR PISTOL AUTO 9MM 1A.

TRIGGER(FINISH) TO DS.CAT NO 1005-003184 (DC-25575-SA) [MACROETCH TEST WILL BE AS PER COL.(D) OF SL.NO.1 OF CQA(SA)NOTE SHEET NO.1] FOR PISTOL AUTO 9MM 1A.

DS.CAT NO 1005-003184 (DC-25575-SA)

SPRING PLATFORM TO DS CAT NO.5360-007117 ( DC-26521-SA ) F0R RIFLE 5.56MM INSAS.

SPRING PLATFORM TO DS CAT NO.5360-007117 ( DC-26521-SA ) F0R RIFLE 5.56MM INSAS.

DS CAT NO.5360-007117 ( DC-26521-SA )

WALLET EMPTY(FOR 5.56MM. RIFLE & LMG)(TO ACCOMODATE 3 PIECE CLEANING ROD & TOOLS/ACCESSORIES) TO DS CAT NO.3770-060959 (SHT.-1 & SHT.-2)(DC-26353-SA).

WALLET EMPTY(FOR 5.56MM. RIFLE & LMG)(TO ACCOMODATE 3 PIECE CLEANING ROD & TOOLS/ACCESSORIES) TO DS CAT NO.3770-060959 (SHT.-1 & SHT.-2)(DC-26353-SA).

DS CAT NO.3770-060959 (SHT.-1 & SHT.-2)(DC-26353-SA).

SLING ASSY.(BLACK COL.)TO DRG.NO.CQA(SA)SK-1000(DC-26480-SA)CONSIST.OF:- 1)CQA(SA)SK-1001(DC-26484-SA), 2)CQA(SA)SK-1002(DC-26480-SA), 3)1005-007992, 4)1005-007994, 5)1005-008031, 6)1005-008032, 7)1005-008030, 8)1005-008029, 9)5360-007800 (DC-26402-SA) & 10)5315-010102.

SLING ASSY.(BLACK COL.)TO DRG.NO.CQA(SA)SK-1000(DC-26480-SA)CONSIST.OF:- 1)CQA(SA)SK-1001(DC-26484-SA), 2)CQA(SA)SK-1002(DC-26480-SA), 3)1005-007992, 4)1005-007994, 5)1005-008031, 6)1005-008032, 7)1005-008030, 8)1005-008029, 9)5360-007800 (DC-26402-SA) & 10)5315-010102.

DRG.NO.CQA(SA)SK-1000(DC-26480-SA)CONSIST.OF:- 1)CQA(SA)SK-1001(DC-26484-SA), 2)CQA(SA)SK-1002(DC-26480-SA), 3)1005-007992, 4)1005-007994, 5)1005-008031, 6)1005-008032, 7)1005-008030, 8)1005-008029, 9)5360-007800 (DC-26402-SA) & 10)5315-010102.

PULL THROUGH FOR 5.56MM 1A(NYLON) TO DS CAT NO. 1005-557944 (LT DC-24847-SA.DT.20-10-2000) CONSIST OF DS CAT NOS. 1) 1005-557945 (DC-25819-SA) 2) 1005-557946 (DC-24847-SA) (1005-557947 & 1005-118588) AND 3) 4030-002838 (DC-25819-SA FOR RIFLE 5.56MM INSAS.

PULL THROUGH FOR 5.56MM.1A(NYLON) TO DS CAT NO. 1005-557944(DC-26403-SA). CONSIST OF:- DS CAT NOS. 1)1005-557945 ( DC-25819-SA ). 2)1005-557946( DC-24847-SA )[1005-557947 & 1005-118588] AND 3)4030-002838( DC-26461-SA ) FOR RIFLE 5.56MM.INSAS.

TO DS CAT NO. 1005-557944(DC-26403-SA). CONSIST OF:- DS CAT NOS. 1)1005-557945 ( DC-25819-SA ). 2)1005-557946( DC-24847-SA )[1005-557947 & 1005-118588] AND 3)4030-002838( DC-26461-SA )

BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993 (DC-26469-SA).(COMPLETE ASSY.). FOR RIFLE 5.56MM INSAS.

BAYONET 1A FOR RIFLE 5.56MM WEAPON TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993 (DC-26469-SA).(COMPLETE ASSY.). FOR RIFLE 5.56MM INSAS.

TO 1005-007812 (DC-26521-SA) AND CQA(SA)SK-992(DC-26469-SA) & CQA(SA)SK-993 (DC-26469-SA).(COMPLETE ASSY.).

UNIT BURST CONTROL TO DS CAT NO.1005-007791 (DC- 26514-SA) CONSIST OF: DS CAT NOS. 1) 1005-007831 2)1005-007868 3)1005-007808 4)1005-007864 5)5315-009328 6)5360-007211. FOR RIFLE 5.56MM INSAS.

UNIT BURST CONTROL TO DS CAT NO.1005-007791 (DC- 26514-SA) CONSIST OF: DS CAT NOS. 1) 1005-007831 2)1005-007868 3)1005-007808 4)1005-007864 5)5315-009328 6)5360-007211. FOR RIFLE 5.56MM INSAS.

DS CAT NO.1005-007791 (DC- 26514-SA) CONSIST OF: DS CAT NOS. 1) 1005-007831 2)1005-007868 3)1005-007808 4)1005-007864 5)5315-009328 6)5360-007211.

SEMI FINISH BLANK OF HAMMER FOR RIFLE 5.56MM INSAS. RFI SK NO.6452*4-S

MATERIAL BS 970 PT I:1983-655 M-13 En-36B

RFI SK NO.6452*4-S