List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
381 L K INDUSTRIES
HNO 2-114/A ROAD NO 5 SOBHANA COLONY SOBHANA COLONY BALANAGAR HYDERABAD Telangana
PIN1 : 500042
Phone No. : 23775688
GSTIN : 36AAZPV1847M1ZK 		AAZPV1847M

Download 		1Vehicle Factory Jabalpur

Name Specification Use Status
1) CASTING FOR BLANK UPPER RACE RING[90]() Specification : CASTING FOR BLANK UPPER RACE RING C Nonestab
2) CASTING FOR LOWER RACE RING[90]() Specification : CASTING FOR LOWER RACE RING C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Magnet Permanent for Firing Device Description : Magnet Permanent for Firing Device() Specification : Magnet Permanent as per Drg. No. CQA(I)393/8 for Device Firing 1B CAT/PT.No.5999-006768 R Estab
Category : p
Grade : 3
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) Precision machined components,Jigs & Fixture,Shafts, Valves,Nut & Bolts() As per specification / Drawings c Not Estab.
2) Sub assemblies, Milling, Turning & Boring Items() As per specification / Drawings c Not Estab
3) Fabrication items() As per specification / Drawings C Non Established
Category : P
Grade : II
Size : S
1Vehicle Factory Jabalpur

Name Specification Use Status
1) Precision machined components,Jigs & Fixture,Shafts, Valves,Nut & Bolts[90]() Specification : As per specification / Drawings R Nonestab
2) Sub assemblies, Milling, Turning & Boring Items[90]() Specification : As per specification / Drawings R Nonestab
3) Fabrication items[90]() Specification : As per specification / Drawings R Nonestab
4) FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000[90]() Specification : FUEL TANK WITHOUT TOOL BOX TO FACILITATE MTG OF AMMUNITION BOX FOR UPGRADED MPV 4X4 L F 9010193097000 DRG No. 2642-57-11 R Nonestab
Category : P
Grade : II
Size :
1Vehicle Factory Jabalpur

[ENR Registration]
Name Specification Use Status
1) BOSS M12 X 20 OD X 30L Description : BOSS M12 X 20 OD X 30L() Specification : BOSS M12 X 20 (OD)X 30L C Estab
2) BOSS M12 X 25L Description : BOSS M12 X 25L() Specification : BOSS M12 X 25L DRG.NO. OFPM 640-01-1050/B PT.NO.640-01-1050-B C Estab
3) BOSS M12 X 20 OD X 65L Description : BOSS M12 X 20 OD X 65L() Specification : BOSS M12 X 20(OD)X 65L C Estab
4) BOSS M12x22x25 OST 3 1496 72 Description : BOSS M12x22x25 OST 3 1496 72() Specification : BOSS M12x22x25 OST 3-1496-72 C Estab
5) BOSS M12 X24 OD X 25 L Description : BOSS M12 X24 OD X 25 L() Specification : BOSS M12 X24 (OD) X 25 L C Estab
6) BOSS M20 BY 25 OD 30L Description : BOSS M20 BY 25 OD 30L() Specification : BOSS M20 X 25 (OD) X 30L C Estab
7) BOSS M6 OD 20 16 L Description : BOSS M6 OD 20 16 L() Specification : BOSS M6XOD(20)X16L C Estab
8) BOSS M6X12X30 OST 3 Description : BOSS M6X12X30 OST 3() Specification : BOSS M6X12X30 OST 3-1496-72 C Estab
9) BOSS M6X12X36 OST 3 1496 72 Description : BOSS M6X12X36 OST 3 1496 72() Specification : BOSS M6X12X36 OST 3-1496-72 C Estab
10) BOSS M8 20 OD 20 L Description : BOSS M8 20 OD 20 L() Specification : BOSS M8X20(OD)X 20L C Estab
11) BOSS M8X16X8 OST 3 1496 72 Description : BOSS M8X16X8 OST 3 1496 72() Specification : BOSS M8X16X8 OST 3-1496-72 C Estab
12) BRACKET GOST STD.(CASTING) FOR TURRET ASSY FOR MPV. Description : BRACKET GOST STD.(CASTING) FOR TURRET ASSY FOR MPV.() Specification : BRACKET GOST STD.(CASTING) FOR TURRET ASSY FOR MPV. C Estab
13) BUSH FOR MPV ARMY VERSION BUSH Description : BUSH FOR MPV ARMY VERSION BUSH() Specification : BUSH FOR MPV ARMY VERSION BUSH PART NO.645-01-7511-1 FOR MPV. C Estab
14) Bush Gost Std Bar Description : Bush Gost Std Bar() Specification : Bush Gost Std./ Bar Drg No. 765-58-312/A C Estab
15) CASTING FOR BODY FOR TURRET ASSY. STEEL 40X GOST 977-75 Description : CASTING FOR BODY FOR TURRET ASSY. STEEL 40X GOST 977-75() Specification : 40X GOST 977-75 C Estab
16) CATCH 675 57 271 A Description : CATCH 675 57 271 A() Specification : CATCH HOOK DRG. NO. 675-57-271/A C Estab
17) CATCH OBLIQUE HOOK STEEL IS 4365 79 Description : CATCH OBLIQUE HOOK STEEL IS 4365 79() Specification : CATCH/HOOK STEEL IS:4365-79 C Estab
18) DOOR WRENCH ASSY DOOR LOCK DRG NO 610 01 4110 1 A Description : DOOR WRENCH ASSY DOOR LOCK DRG NO 610 01 4110 1 A() Specification : DOOR WRENCH ASSY (DOOR LOCK) DRG.NO.610-01-4110-1/A C Estab
19) EYE Description : EYE() Specification : EYE DRG. NO. 765-58-193/A C Estab
20) HANDLE ASSY 675 50 CB301 Description : HANDLE ASSY 675 50 CB301() Specification : HANDLE ASSY AS PER DRG. NO. 675-50-CB301 C Estab
21) Handle Gost Std Description : Handle Gost Std() Specification : Handle Gost Std. (Handle Blank) C Estab
22) HANDLE LEVER 765 58 221 C Description : HANDLE LEVER 765 58 221 C() Specification : HANDLE LEVER DRG. NO. 765-58-221/C C Estab
23) HINGE FORGING Description : HINGE FORGING() Specification : HINGE(FORGING) DRG NO 765-50-2447-A C Estab
24) HINGE GOST STD Description : HINGE GOST STD() Specification : HINGE GOST STD 765-58-211 C Estab
25) Hinge Driver Hatch Assembly forging Description : Hinge Driver Hatch Assembly forging() Specification : Hinge (Driver Hatch Assembly) forging C Estab
26) HOOK PART NO 675 57271 A Description : HOOK PART NO 675 57271 A() Specification : HOOK PART NO 675-57-271/A C Estab
27) LEVER CONTROL HAND/TORSION BAR Description : LEVER CONTROL HAND/TORSION BAR() Specification : LEVER CONTROL HAND C Estab
28) FORGING FOR PIVOT FOR TURRET ASSY. Description : FORGING FOR PIVOT FOR TURRET ASSY.() Specification : FORGING FOR PIVOT FOR TURRET ASSY. C Estab
29) PIVOT FOR RACE RING ASSY FOR MPV FINISH Description : PIVOT FOR RACE RING ASSY FOR MPV FINISH() Specification : PIVOT FOR RACE RING ASSY FOR MPV (FINISH). DRG.NO. 645-01-7318-1/B. C Estab
30) BOLT M12 6G 80 46 019 GOST Description : BOLT M12 6G 80 46 019 GOST() Specification : BOLT M12-6GX80.46.019 GOST 7795-70 C Estab
31) BOLT M 6 20 46 019 GOST 7798 70 Description : BOLT M 6 20 46 019 GOST 7798 70() Specification : BOLT M6X20.46.019 GOST 7798-70 C Estab
32) BOLT M8 6G 18 46 019 GOST Description : BOLT M8 6G 18 46 019 GOST() Specification : BOLT M8-6GX18.46.019 GOST:7796-70 C Estab
33) BOLT M8 X 45 Description : BOLT M8 X 45() Specification : BOLT M8X45.46.019 GOST:7795-70 C Estab
34) NUT M8 6.019 GOST:5932-73() Specification : NUT M8 6.019 GOST:5932-73 C Estab
35) SP STEERING FORGING PLUG (FUEL TANK INLET PIPE ASSY) Description : SP STEERING FORGING PLUG (FUEL TANK INLET PIPE ASSY)() Specification : SP STEERING FORGING PLUG (FUEL TANK INLET PIPE ASSY) C Estab
36) SPECIAL HINGE Description : SPECIAL HINGE() Specification : SPECIAL HINGE 700-10-1267/B C Estab
37) THREADED BOSS M10X18MMX18MM Description : THREADED BOSS M10X18MMX18MM() Specification : THREADED BOSS M10 X 18MM (OD) X18MM LENGTH FULL THREADED MATERIAL :IS:9550 GR-2, 20C8 C Estab
38) THREADED BOSS M10 18 22 Description : THREADED BOSS M10 18 22() Specification : THREADED BOSS M10X18X22 C Estab
39) THREADED BOSS M10 X 20MM OD X 30MM Description : THREADED BOSS M10 X 20MM OD X 30MM() Specification : THREADED BOSS M10 X 20MM (OD) X 30MM LENGTH TO DRG NO.: 218-03-1089/9 C Estab
40) THREADED BOSS M12 X 1 point 75 X OD 20 X 20L Description : THREADED BOSS M12 X 1 point 75 X OD 20 X 20L() Specification : THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8 C Estab
41) THREADED BOSS M12X 1 point 75 X OD 20X60 MM Description : THREADED BOSS M12X 1 point 75 X OD 20X60 MM() Specification : THREADED BOSS M12X1.75X OD 20X60 MM LENGTH MATERIAL : M.S. C Estab
42) THREADED BOSS M12 X 20MM OD X30MM Description : THREADED BOSS M12 X 20MM OD X30MM() Specification : THREADED BOSS M12 X 20MM (OD) X30MM LENGTH TO DRG NO.:218-03-1089/7 C Estab
43) THREADED BOSS M6 X 12MM OD X12MM Description : THREADED BOSS M6 X 12MM OD X12MM() Specification : THREADED BOSS M6 X 12MM (OD) X12MM LENGTH TO DRG NO.218-03-1089/2 C Estab
44) THREADED BOSS M6 12MM 16MM Description : THREADED BOSS M6 12MM 16MM() Specification : THREADED BOSS M6X12MMX16MM C Estab
45) THREADED BOSS M8 X 16MM OD X12MM Description : THREADED BOSS M8 X 16MM OD X12MM() Specification : THREADED BOSS M8 X 16MM (OD) X12MM LENGTH C Estab
46) THREADED BOSS M8 X 16MM OD X25MM Description : THREADED BOSS M8 X 16MM OD X25MM() Specification : THREADED BOSS M8 X 16MM (OD)X25MM LENGTH C Estab
47) THREADED BOSS M8 X 16MM OD X40MM Description : THREADED BOSS M8 X 16MM OD X40MM() Specification : THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8 C Estab
48) SAFETY BELT (FOR MPV) Description : SAFETY BELT (FOR MPV)() Specification : SAFETY BELT DRG. NO. OFPM 600 – 10 – 1014/G C Estab
49) Casting for Bracket for Turret Assy. Description : Casting for Bracket for Turret Assy.() Specification : Casting for Bracket for Turret Assy. C Estab
Category : p
Grade : 2
Size : S
1Ordnance Factory Bhusawal

[ENR Registration]
Name Specification Use Status
1) 9911846320 CABLE CLAMP TOP Description : 9911846320 CABLE CLAMP TOP() Specification : AS PER OFBH SPECIFICATION R Estab
2) 9911846411 CABLE CLAMP FOR BOTTOM IDE Description : 9911846411 CABLE CLAMP FOR BOTTOM IDE() Specification : AS PER OFBH SPECIFICATION R Estab
3) 9911846316 POD STAKING ASSY FRONT Description : 9911846316 POD STAKING ASSY FRONT() Specification : AS PER OFBH SPECIFICATION R Estab
4) 9911846315 POD STAKING ASSY Description : 9911846315 POD STAKING ASSY() Specification : AS PER OFBH SPECIFICATION R Estab
Category : p
Grade : 3
Size : S
382 CMI AEROSPACE METAL INDUSTRIES
First floor 5 5 35 8 Plot No 54 Prashanti Nagar Kukatpally Hyderabad 5000 072 Prashanthinagar Hyderabad Telangana
PIN1 : 500072
Phone No. : 48574725
GSTIN : 36ABFPC5610E1Z9 		ABFPC5610E

Download 		1Opto Electronic Factory

Name Specification Use Status
1) SHT AL ALLOY GR 24345 T 4X500 LF NO 9927071003[99]() Specification : SHT AL ALLOY GR 24345 T 4X500 LF NO 9927071003 R Nonestab
2) ROD BRONZE GR CS 101 D15 LF NO 9927082931[99]() Specification : ROD BRONZE GR CS 101 D15 LF NO 9927082931 R Nonestab
3) SHT COPPER GR CU ETP 0 POINT 12 LF NO 0707663012[07]() Specification : SHT COPPER GR.CU-ETP T 0.12, L.F.NO.0707663012 R Nonestab
4) BRASS ROD GR CUZN39PB1 55 MM DIA LF NO 0711406055[07]() Specification : BRASS ROD GR CUZN39PB1 55 MM DIA LF NO 0711406055 R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS TUBE 13 85X10 95X185L IS 407 LF 0717255200 Description : BRASS TUBE 13 85X10 95X185L IS 407 LF 0717255200() Specification : BRASS TUBE SIZE 13.85 +0.1 OD X 10.95 -0.05 ID X 185(-0.3)MMLONG IS-407-1981 (THIRD REV.)(REAFFIRMED 2006) GRD.CU Zn 30AS "TA" COND WITH PROP RM-300/332 MPa HARDNESS 50 TO 62 HRB. R Nonestab
2) copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020 Description : copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020() Specification : COPPER STRIP 20+/_ 0.2 X 0 75 + 0 02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN BS EN 1652 R Nonestab
3) ALU ALLOY ROD 31 75MM IS733 64430 W LF 0611503032 Description : ALU ALLOY ROD 31 75MM IS733 64430 W LF 0611503032() Specification : ALUMINIUM ALLOY ROD 31.75 +/-0.14 MM DIA IN ST LENGTH OF 2-3 METERS.TO SPECN:-IS-733-1983 (REAFFIRMED 2006) (THIRDREVISION) DESIG 64430 "W" CONDITION. R Nonestab
4) BRASS STRIP 31 75X0 558MM LF 0710760997 Description : BRASS STRIP 31 75X0 558MM LF 0710760997() Specification : BRASS STRIP 31.75+/-0.50MM WIDEX 0.558+/- 0.0254 MM THICK (1.25 X 0.022" (24 SWG) SPECN : IS-410.-1977 (THIRD REV.)(REAFFIRMED-2006) WITH AMENDMENT NO.1 APRIL-1981 CU ZN 30 CONDITION (a). R Nonestab
Category : s
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS ROD 23MM BS2874 CZ115 M LF 0711500023 Description : BRASS ROD 23MM BS2874 CZ115 M LF 0711500023() Specification : BRASS ROD 23 +0.05/-0.10 MM DIA IN LENGTH OF 1.5 TO 2 METRE TO SPECN.BS:2874-1986 CZ-115 M R Nonestab
Category : s
Grade : 3
Size : S
1Ordnance Factory Bhusawal

Name Specification Use Status
1) 9911847035 ALUMINIUM ALLOY PLATE 25MM THK[99]() Specification : AS PER OFBH SPECIFICATION R Nonestab
2) 9911847545 ALUMINUM EXTRUDED SECTION[99]() Specification : AS PER OFBH SPECIFICATION R Nonestab
3) 9911847036 AL ALLOY PLATE 10 MM THK[99]() Specification : AS PER OFBH SPECIFICATION R Nonestab
4) 9911847544 ALUMINUM EXTRUDED SECTION[99]() Specification : AS PER OFBH SPECIFICATION R Nonestab
5) 9911847543 ALUMINUM EXTRUDED SECTION[99]() Specification : AS PER OFBH SPECIFICATION R Nonestab
6) 9911847041 ALUMINIUM ALLOY CHANNEL[99]() Specification : AS PER OFBH SPECIFICATION R Nonestab
7) 9911847542 ALUMINUM EXTRUDED 322SECTION[99]() Specification : AS PER OFBH SPECIFICATION R Nonestab
8) 9911847051 ALUMINIUM BAR[99]() Specification : AS PER OFBH SPECIFICATION R Nonestab
9) 9911847037 ALALLOY PLATE 6MM THICK[99]() Specification : AS PER OFBH SPECIFICATION R Nonestab
10) 9911847039 AL ALLOY PLATE 10 MM THK[99]() Specification : AS PER OFBH SPECIFICATION R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Muradnagar

Name Specification Use Status
1) NICKEL PURE (0850100000)[08]() Specification : NICKEL PURE AS PER SPECIFICATION IS-2782 1964 GRADE-II SIZE ] [CHARGEABLE PLATE OF MAX. 100 MM SQ OR ["NICKEL PURE IN "PLATE" FROM TO SIZE 100 MM X 6 R Nonestab
2) ALUMINIUM PURE INGOT (0615186000)[06]() Specification : ALUMINIUM PURE INGOT 99% PURE TO SPECIFICATION IS-617-1994 [DESIGNATION 1900 WEIGHT OF INGOT -ONE KG APPROXIMATE [ OR ] [PRIMARY ALUMINIUM INGOTS WITH MINIMU R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 0133030151 MILD STEEL PLATE AS PER SPECN NO BS970 GREN3[01]() Specification : MILD STEEL PLATE SIZE 1830X 1830 X 25 MM THICK AS PER SPECN. NO. BS970 GREN3 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 0700191388 STRIP COPPER 72MM W[07]() Specification : COPPER STRIP TO BS 2870-1980 GRADE C-101, C-102, C-104 0RC-106. ANNEALED.HARDNESS 60 HV. SIZE 72 MM +/- 0.3MM WIDE X0.813 MM TOLERANCE +/- 0.13 MM THICK. COILED R Nonestab
2) 0700161382 STRIP COPPER[07]() Specification : COPPER STRIP TO BS 2870-1980 GRADE C-101, C-102,C-104, C-105,C-106, C-107 ANNEALED. HARDNESS 60 HV. SIZE 62 MM WIDE X1.27 MM THICK COILED. R Nonestab
3) 0615458005 STRIP ALUMINIUM 130MM[06]() Specification : ALUMINIUM ALLOY STRIP, SIZE:130 MM PLUS MINUS 0.5 MM WIDE X0.5 MM PLUS MINUS 0.02 MM THICK TO SPECIFICATION IS:737-2008 (FOURTH REVISION) GRADE 19500 IN CONDITION HX4. R Nonestab
4) 0700261021 STRIP CU ALLOY[07]() Specification : STRIP COPPER ALLOY SIZE 15 PLUS MINUS 0.2 MM WIDE X 0.16PLUS MINUS 0.01 MM THICK ANNEALED IN COIL FORM AND LENGTHOF COIL 40 MTRS. SPECN IS 14811 : 2000. R Nonestab
5) 0700691107 STRIP COPPER[07]() Specification : STRIP COPPER ALLOY,SIZE 25 PLUS MINUS 0.20 MM WIDE X0.07 MINUS 0.02 MM THICK TO SPECIFICATION BS 2870-1980,C-106WITH HARDNESS 70 TO 90 VPN. R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 0120002100 SHEET STEEL SIZE 2 MM THICK[01]() Specification : SHEET STEEL, SIZE :-1830 MM LONG X 915 M WIDE X 2 MM THICKTO SPECN IS:513-1994 GRADE D. R Nonestab
2) 0133021020 SHEET M S[01]() Specification : SHEET MILD STEEL,SIZE: 2 MM THICK X 1830 MM LONG X 915 WIDE.IS - 1079-1994,GRADE "O" R Nonestab
3) 0133021025 SHEET STEEL[01]() Specification : SHEET STEEL,SIZE 3000 MM LONG X 1000 MM WIDE X 2.5 MM THICKTO SPECN.IS: 513 -1994, GRADE "D" R Nonestab
4) 0134071134 SHEET STEEL SIZE[01]() Specification : SHEET STEEL SIZE 1830 MM LONG X 915 MM WIDE X 1.6 MM THICKTO SPECN IS 513 1986 GRADE D R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 0717592172 STRIP BRASS 0.56 MM TH X13.5 MM WID[07]() Specification : SPECN. NO. JSS-9535-2 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6334100726 STAINLESS STEE NUT M4 FOR PINKA RKT[63]() Specification : IS-1367 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 0700660066 STRIP COPPER[07]() Specification : TRIP COPPER SIZE-105MM +2MM WIDE X0.4 +/- 0.03MM THICK TO SPECN:B-2870-C-101 OR C-102 R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 0133030112 MS PLATE SIZE 1100[01]() Specification : MS PLATE OF SIZE-1100 X 100 X 10MM (IS 2062-1994 OF ANYGRADE) C Nonestab
2) 0133030115 MS PLATE SIZE 400[01]() Specification : MS PLATE OF SIZE 400 X 200 X 6MM (IS 2062-1994 OF ANYGRADE) C Nonestab
3) 0133030113 MS PLATE SIZE 450 MM[01]() Specification : MS PLATE OF SIZE 450 X 450 X 50MM (IS-2062-1994 OF ANYGRADE) C Nonestab
4) 0133030120 MS ROD SIZE 50MM DIA 100MM LENGTH[01]() Specification : MS ROD OF SIZE 50MM DIA X 100MM LENGTH (IS-2062-1994 OF ANYGRADE) R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 0615466055 STRIP AL[06]() Specification : STRIP ALUMINIUM ALLOY SIZE 12 PLUS MINUS 0.2 MM WIDE X0.38 PLUS MINUS 0.02 MM THICK TO SPECN IS 737 - 1986GRADE-19000 CONDITION H4 R Nonestab
2) 0615461060 STRIP AL[06]() Specification : STRIP ALUMINIUM SIZE 18 PLUS MINUS 0.2 MM WIDE X 0.6 PLUSMINUS 0.02 MM THICK TO SPECN.IS-737-1986 GRADE 53000 IN "O"CONDITION. R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 1579451003 STEEL STRIP[15]() Specification : STEEL SHEET STRIP 3.175MM THICK ( 8 feet X 4 feet ) DRG NO. . LEG ASSY ITX 46 SA - PART NO. LEG ITX 242 & BRACKET ITX 243 DC NO. 35824-A DATED 16-04-2002 R Nonestab
2) 0615246061 ALUMINIUM STRIP SHEET[06]() Specification : ALUMINIUM STRIP SIZE :68 +/- 0.2 MM WIDE X 06 +/- 0.02 MM THICK WITH BOW CONDITION @ MAX 2.54 MM PER METER LENGTH OF COIL SPECN. IS 737 LATEST ( DESIGN : 19500 COND.0' ) HEMRL /IGN/PS/420 DTD. 13-06-2019 R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6333501102 MS TARGET PLATE[63]() Specification : MS TARGET PLATE THICKNESS 5 MM AS PER OFCH DRG. NO. OFCH/PR/236 R Nonestab
2) 6333501101 MS TARGET PLATE[63]() Specification : MS TARGET PLATE THICKNESS 1.5 MM AS PER OFCH DRG. NO. OFCH/PR/235 R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 0800520002 SHEET LEAD 2440MMX1220MMX2MM THICK.[08]() Specification : SPECN.IS-405 (PART-1):1992 (THIRD REV.) R Nonestab
2) 0133030114 MS PLATE SIZE 6MM[01]() Specification : IS 2062-1994 C Nonestab
3) 0133030109 MS PLATE SIZE 25MM[01]() Specification : IS 2062-1994 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 0615400022 ALUMINIUM AALLOY ROD SIZE 22 MM DIA[06]() Specification : IS:733-1983 R Nonestab
2) 0717591247 STRIP BRASS 60 MM WID[07]() Specification : JSS 9535-02:2008 R Nonestab
3) 0717590946 STRIP BRASS 83 MM WIDE[07]() Specification : JSS 9535 - 2 R Nonestab
4) 0710660222 STRIP BRASS 69 MM W[07]() Specification : JSS-9535-02:2008 R Nonestab
5) 0712568007 STRIP BRASS[07]() Specification : IS-410-1977 R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 0700160045 CU ALLOY STRIP 45MM WIDE 2MM TH[07]() Specification : COPPER ALLOY STRIP SIZE 45 +/-0.5 MM WIDE X 2 +/-0.1 MM TH. TO SPECIFICATION NO. BS EN 1652:1997. SYMBOL CUZN10. NUMBER CW 501L WITH MATERIAL CONDITION H110, HARDNESS 110-130 HV.REQUIRED FOR TRACER NO.12 OF SHELL 125MM HEAT. R Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) ST SQR 125MM IS 5517-78,40NI6C[70]() Specification : ST SQR 125MM IS 5517-78,40NI6C R Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) STEEL SHEET SIZE 4.00 MM +0.30 MM X 1000 MM X 2500 MM LENGTH TO SPECIFICATION IS:2062 - 2011 GRADE E 350A[70]() Specification : SPECIFICATION IS:2062 - 2011 GRADE E 350A R Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) STRUCTURAL STEEL BAR ROUND 10 MM DIA X 6 MTR LENGTH TO SPECN IS 2062 1992 GD B DESIGNATION Fe 410 WB[70]() Specification : STRUCTURAL STEEL BAR ROUND 10 MM DIA X 6 MTR. LENGTH TO SPECN IS:2062-1992 GD-B DESIGNATION Fe 410 WB C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 0720300095 PB ROUND 95MM DIA STD LENGTH TOM SPECIFICATION IS 7811 1985[70]() Specification : 0720300095 P.B.ROUND 95MM DIA STD.LENGTH TOM SPECN: IS: 7811-1985. R Estab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) AL PLATE 2MM THICK IS:737-08,52000[70]() Specification : AL PLATE 2MM THICK IS:737-08,52000 R Nonestab
2) AL RD 95MM DIA IS:733-1983, 76528 WP[70]() Specification : AL RD 95MM DIA IS:733-1983, 76528 WP R Nonestab
3) AL FLAT 130X100MM IS:733-1983,76528[70]() Specification : AL FLAT 130X100MM IS:733-1983,76528 R Nonestab
4) AL ANGLE 60X40X5 IS733-83,64430 WP[70]() Specification : AL ANGLE 60X40X5 IS733-83,64430 WP R Nonestab
5) AL FLAT 120X85MM IS:733-1983,76528[70]() Specification : AL FLAT 120X85MM IS:733-1983,76528 R Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) STEEL FLAT SIZE 100 MM X 55 MM X 2.5 METER LENGTH OR ITS MULTIPLE TO IS:5517-1993, DESIGN. 42CR4M02, LRS 100[70]() Specification : STEEL FLAT SIZE 100 MM X 55 MM X 2.5 METER LENGTH OR ITS MULTIPLE TO IS:5517-1993, DESIGN. 42CR4M02, LRS 100 R Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) STEEL SHEET 1.00 MM THICK X (1000 X 2500 MM LONG) TO SPECN IS:5986-2002 GD Fe 410 HOT ROLLED & ANNEALED OR IS:2062-19999 GD Fe410WA OR IS 1079-1988 GD ST42[70]() Specification : STEEL SHEET 1.00 MM THICK X (1000 X 2500 MM LONG) TO SPECN IS:5986-2002 GD Fe 410 HOT ROLLED & ANNEALED OR IS:2062-19999 GD Fe410WA OR IS 1079-1988 GD ST42 R Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 0720201038 PB ROUND 38 MM DIA IN STD LENGTH TO SPECN IS 7811 1985[70]() Specification : 0720201038 PB.ROUND 38.00 MM DIA IN STD.LENGTH TO SPECN.IS:7811-1985 R Estab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 0725177160 PB HOLLOW BAR 160 MM[90]() Specification : PB HOLLOW BAR O/S DIA 160 MM X I/D DIA 110 MM TO SPECN. IS:28-1985 GRADE 2 R Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) COPPER ALLOY BAR TO SIZE 60MM DIA X 1500MM OR MULTIPLES IN LENGTH TO SPECN BS 2874 86 Gde CA 104[70]() Specification : COPPER ALLOY BAR TO SIZE 60MM DIA X 1500MM OR MULTIPLES IN LENGTH TO SPECN BS 2874 86 Gde CA 104 R Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) COPPER ALLOY BAR TO SIZE 60MM DIA X 1500MM OR MULTIPLES IN LENGTH TO SPECN BS 2874 86 Gde CA 104[70]() Specification : COPPER ALLOY BAR TO SIZE 60MM DIA X 1500MM OR MULTIPLES IN LENGTH TO SPECN BS 2874 86 Gde CA 104 R Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) 0720201038 PB ROUND 38 MM DIA IN STD LENGTH TO SPECN IS 7811 1985[70]() Specification : 0720201038 PB.ROUND 38.00 MM DIA IN STD.LENGTH TO SPECN.IS:7811-1985 R Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) STEEL SHEET SIZE 1 25 MM THICK X 900 MM WIDTH X 2500 MM LENGTH TO SPECN IS 513 1994 COLD ROLLED AND ANNEALED TYPE D BEST SURFACE[70]() Specification : STEEL SHEET SIZE 1.25 MM THICK X 900 MM WIDTH X 2500 MM LENGTH TO SPECN IS:513-1994 COLD ROLLED AND ANNEALED TYPE 'D' BEST SURFACE R Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) STAINLESS STEEL TUBE 125X100X830MM[70]() Specification : STAINLESS STEEL TUBE TO SIZE OUTER DIA 125.00 (+) (-) 1.00 - MM X INNER DIA 100.00 (+) (-) 1.00 MM X 830.00 (+) 2.00 MM LONG TO SPECN: AISI-316.OR,AISI-304. R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) ALUMINIUM PLATE 6061 T651 PER AMS QQ A 250 11 size 32T X 406W X 406L MM ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED[06]() Specification : ALUMINIUM PLATE 6061-T651 PER AMS QQ-A-250/11 size: 32T X 406W X 406L MM. ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED R Nonestab
2) ALUMINIUM ALLOY PLATE 6061 T6 OR T651 PER QQ A 250 11 size 60T X 100W X 410L MM ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED[06]() Specification : ALUMINIUM ALLOY PLATE 6061- T6 OR T651 PER QQ-A-250/11 size: 60T X 100W X 410L MM. ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED. R Nonestab
3) ALUMINIUM PLATE 6061 T651 PER AMS QQ A 250 11 TO SIZE 127MM THICK X 340MM WIDTH X 445MM LENGTH IMPORTANT NOTE ASSURE THAT GRAINS ARE IN LONGITUDINAL ORIENTATION For CRADLE MOBILE AND CRADLE BASE OF SRCG ALL RELEVANT TEST CERTIFICATES FROM NABL LAB[06]() Specification : ALUMINIUM PLATE 6061-T651 PER AMS QQ-A-250/11 TO SIZE 127MM THICK X 340MM WIDTH X 445MM LENGTH. IMPORTANT NOTE ASSURE THAT GRAINS ARE IN LONGITUDINAL ORIENTATION. For CRADLE MOBILE AND CRADLE BASE OF SRCG. ALL RELEVANT TEST CERTIFICATES F R Nonestab
4) STAINLESS STEEL PLATE 316 PER ASTM A 240 PLATE SIZE 56 TX 90L X 110 W IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED FOR SRCG[03]() Specification : STAINLESS STEEL PLATE 316 PER ASTM A 240. PLATE SIZE 56 TX 90L X 110W (IN MM) ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED FOR SRCG R Nonestab
5) ALUMINIUM ALLOY BAR TYPE 6061 T6 PER QQ A 225 8 OR T651 SIZE DIA100 X 144L MM ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED[06]() Specification : ALUMINIUM ALLOY BAR TYPE 6061-T6 PER QQ-A-225/8 OR T651 SIZE: DIA100 X 144L MM. ALL RELEVANT CHEMICAL AND MECHANICAL TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED R Nonestab
6) CRES PLATE 316 PER ASTM A 240 SIZE20TX25WX90L IN MM ALL RELEVANT TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED[03]() Specification : CRES PLATE 316 PER ASTM-A-240. SIZE:20TX25WX90L (IN MM). ALL RELEVANT TEST CERTIFICATE FROM NABL ACCREDITED LAB TO BE SUBMITTED. R Nonestab
7) ALUMINIUM PLATE 6061 T651 PER AMS QQ A 250 11 TO SIZE 127MM THICK X 340MM WIDTH X 445MM LENGTH IMPORTANT NOTE ASSURE THAT GRAINS ARE IN LONGITUDINAL ORIENTATION For CRADLE MOBILE AND CRADLE BASE OF SRCG[06]() Specification : ALUMINIUM PLATE 6061-T651 PER AMS QQ-A-250/11 TO SIZE 127MM THICK X 340MM WIDTH X 445MM LENGTH. IMPORTANT NOTE ASSURE THAT GRAINS ARE IN LONGITUDINAL ORIENTATION. For CRADLE MOBILE AND CRADLE BASE OF SRCG R Nonestab
8) CRES ROD 304L PER ASTM A 276 ROD DIA 14MM ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED[03]() Specification : CRES ROD 304L PER ASTM-A-276. ROD DIA 14MM. ALL RELEVANT TEST CERTIFICATE FROM NABL LAB TO BE SUBMITTED. R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Al alloy rod 35mm ENAW7075 T6 LF 0611505135 Description : Al alloy rod 35mm ENAW7075 T6 LF 0611505135() Specification : Al alloy rod 35+/- 0.3mm in std. length of 2.0 to 3.0 meter to specification EN AW 7075-T6 R Nonestab
Category : s
Grade : 3
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) BRASS RODS 38point1 plus minus 0point1mm DIA TO SPEC BS 2874 1986 CZ 122 PB 3 IN M CONDITION[07]() Specification : BRASS RODS 38.1+/- 0.1mm DIA BS 2874:1986 -CZ 122 PB-3 IN "M" CONDITION. R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Aluminium tube 80 5 x 60mm LF 0611558860 Description : Aluminium tube 80 5 x 60mm LF 0611558860() Specification : Aluminium tube 80.5 x 60mm LF 0611558860 R Nonestab
Category : s
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) BRASS TUBE 22 35X16 70MM BS2871 M Lf 0717559001 Description : BRASS TUBE 22 35X16 70MM BS2871 M Lf 0717559001() Specification : TUBING BRASS SEAMLESS 22.35+0.00/-0.15 MM OUTSIDE DIA X 16.70+0.10/-0.00MM INSIDE DIA WALL THICKNESS NOT LESS THAN 2.60MMIN THE STRAIGHT LENGHT OF 324+/-2.0 MM MATERIAL COMPOSITIONAS PER SPECN.BS-2871 PT-2 1972 CZ -126 M CONDITION.(STRESS R Nonestab
Category : s
Grade : 3
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) Brass rod 8 5mm bs 2874 cz129 m LF 0741100004 Description : Brass rod 8 5mm bs 2874 cz129 m LF 0741100004() Specification : Brass rod 8 5mm(-0.050)mm Dia in straight length of 3.0meter(-0.2m max) to specn:BS-2874-CZ-129 cond. 'M' circular ovality 0.020mm max; straightness 01mm in 01 meter & rod should be packed in a suitable box to prevent bending during trans R Nonestab
Category : s
Grade : 3
Size : S
383 BALDOTA VALVE & FITTING CO. PVT. LTD.
86, UNIVERSAL INDL. ESTATE I.B. PATEL ROAD, GOREGAON MUMBAI MAHARASHTRA
PIN1 : 400063
Phone No. : 0222685999
GSTIN : 27AAACB6584F1ZM 		MUMB11664C

Download 		1Ordnance Factory Itarsi

Name Specification Use Status
1) FUNNEL WITH VALVES() DRG.NO.OFI/2006/GMP/97 E Not Estab
Category : DP
Grade : I
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) Valve Assy, Pipe with Pressure Gauge, Electro Pneumatic Valve() 188.60.028CBCB, 175.60.015CB-3, 219.09CB-319CB C Not Estab.
2) 19 TYPES OF PNEUMATIC VALVES() AS PER DRG C Non Established
3) 06 TYPES OF HYDRAULIC VALVES() AS PER DRG C Non Established
4) FILTER() DRG.NO.432.32.008CBCB C Non Established
Category : P
Grade : II
Size : S
1Ordnance Factory Medak

Name Specification Use Status
1) AIR PRESSURE CONTROL UNIT() 765-78-CB533 C Not Estab
Category : P
Grade : II
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) PRESSURE AND VACCUM RELIEF VALVE[06]() Specification : PRESSURE AND VACCUM RELIEF VALVE / 172.31.081CB-1 E Nonestab
Category : dp
Grade : Grade II
Size : S
384 INDO ENGINEERING PRODUCTS ,
5B , TYPE -II , APIIC , I. E. , PRASHANTHI NAGAR , KUKATPALLY, HYDERABAD TELANGANA
PIN1 : 500072
Phone No. : 040-23700262,FAX NO. 040-23078907 , MOB. NO. 09391042281 ,
GSTIN : 36ADCPC9303P1ZF 		HYDV03858B

Download 		1Small Arms Factory

Name Specification Use Status
1) CYLENDER GAS FOR RIFLE 7.62 MM() AS PER DRG. C Not Estab.
2) BARREL BLANK FOR RIFLE 5.56 MM() AS PER DRG. C Not Estab.
3) MACHING OF BARREL BLANK UP TO COLD SWAGING STAGE AS PER DRG. NO. SK-3190 () AS PER DRG. C Not Estab.
4) MACHING OF BARREL BLANK UP TO COLD SWAGING STAGE AS PER DRG. NO. SKM-930() AS PER DRG. C Not Estab.
5) MACHING OF BARREL BLANK UP TO COLD SWAGING STAGE AS PER DRG. NO. RIFLE-5107*2() AS PER DRG. C Not Estab.
6) BARREL BLANK TO BE HONED AND TURNED TO PRECOLD STAGE AS PER DRG. NO. SK-5371() AS PER DRG. C Not Estab.
Category : P
Grade : II
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470[70]() Specification : CONVERSION OF BODY BLANK WITHOUT HEAT TREATMENT PHOSPATING REQUIRED FOR THE PRODUCTION OF 0POINT315 SPR TO DRG NO TEND 2644 FROM FORGING DRG NO RFI SK 7470SK 7470 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SUPPLY OF PREMACHINED BLANK S 2 TO DRG NO TEND 2607STAR4 WITH OFT SUPPLIED MATERIAL REQUIRED FOR K 3001STAR4 FIXED BUTT FOR TAR[70]() Specification : AS PER DRG NO. TEND 2607STAR4 WITH OFT MATERIAL C Nonestab
2) BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR[70]() Specification : BOLT CARRIER AS PER DRG NO K 2001STR2 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL REQUIRED FOR TAR C Nonestab
Category :
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) TUBE CYLINDER GAS WELDING ASSEMBLY FOR 7.62MM ASSAULT RIFLE (GHAATAK)() AS PER DRAWING. C Not Estab.
Category : P
Grade : III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) SLIDE IN FC WITHOUT NICKEL PLATING TO DRG NO M 8196C for 0 POINT 32 Pistol[70]() Specification : SLIDE IN F/C WITHOUT NICKEL PLATING TO DRG. NO. M-8196C for 0.32" Pistol C Nonestab
Category :
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) RECEIVER TO DRG, NO. CTM-0108/1 TO CTM-0108/6[70]() Specification : AS PER DRAWING C Nonestab
Category :
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) SLIDE FOR ASHANI MK 1M CTM 179 WITHOUT PLATING[70]() Specification : AS PER DRAWING C Nonestab
2) SLIDE TO DRG NO CTM 166[70]() Specification : SLIDE TO DRG NO CTM-166 FOR ASHNI MK-III IN F/C C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STR7[70]() Specification : PRE MACHINED BLANK S2 AS PER DRG NO TEND 2449 STAR 10 WITH OFT RAW MATERIAL REQUIRED FOR K 4001 STAR 7 C Nonestab
2) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]() Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL C Nonestab
3) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]() Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL C Nonestab
4) MSL HOUSING LAUNCHER[70]() Specification : MANUFACTURE AND SUPPLY OF INPUT BLANK AS PER DRG. NO. TEND 2661 FOR MSL HOUSING LAUNCHER (BEFORE HARD ANODIZING STAGE) WITH FIRM'S MATERIAL C Nonestab
5) CYLINDER TO DRG NO 44P 02001 STAR[70]() Specification : AS PER OFT REQUIREMENTS R Nonestab
6) Manufacturing and supply of barrel blank after honing stage[70]() Specification : Manufacturing and supply of barrel blank after honing stage as per DRG No. TEND 2628 STAR with firms material required for 40mm MGL barrel C Nonestab
7) PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001[00]() Specification : PREMACHINED BLANK S2 AS PER DRG No TEND 2659 WITH OFT MATERIAL REQUIRED FOR UBGL TAR BODY 36P 1001 C Nonestab
8) INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL[70]() Specification : INPUT BLANKS FOR REAR SIGHT BLOCK COMPONENT AS PER DRG NO TEND 2634 STR 2 WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 BODY[70]() Specification : MANUFACTURING AND SUPPLY OF PREMACHINED BLANK S3 AS PER DRG NO TEND 2642 WITH OFT MATERIAL REQUIRED FOR K 4001 STAR 6 (BODY) C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SEMI- FINISHED BLANK TO DRG. NO. TEND 2529 (OFT MATERIAL) REQD.FOR MSL CYLINDER TO DRG. NO. 33P 2011.[70]() Specification : AS PER DRAWING AND SPECIFICATION C Nonestab
Category : p
Grade : Grade II
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) BOLT CARRIER BLANK AS PER DRG NO TEND 2383STR2[70]() Specification : AS PER DRG NO TEND 2383 STR 2 C Nonestab
Category : p
Grade : Grade II
Size : S
1Small Arms Factory

Name Specification Use Status
1) RAIL SK 6548 TE[70]() Specification : RAIL SK-6548/ TE C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) STEEL BLANK OF CYLINDER GAS TO DRG NO SKM 889 WITHOUT HEAT TREATMENT[70]() Specification : STEEL BLANK OF CYLINDER GAS TO DRG. NO. SKM- 889 WITHOUT HEAT TREATMENT (STEEL FORGING SKM- 306*3 LF NO. 0144079003 TO BE ISSUED BY SAF AGAINST B/G) C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) OPERATION DEEP HOLE DRILLING item code 0000000300[00]() Specification : DRG.NO. TRD-222077 C Estab
Category : p
Grade : Grade III
Size : S
385 SPINMET ENGINEERS PVT LTD
NO 6, RAGHAVA ENCLAVE-II TRANSPORT ROAD SECUDERABAD (A.P.) TELANGANA INDIA
PIN1 : 500009
Phone No. : 9246585881
GSTIN : 36AABCG5203B1ZB 		AABCG5203B

Download 		1Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6330901300 LINER FOR SHAPED CHARGE 90 MM TO DRG NO HE CAST 018 DET 3 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008 Description : 6330901300 LINER FOR SHAPED CHARGE 90 MM TO DRG NO HE CAST 018 DET 3 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008() Specification : LINER FOR SHAPED CHARGE 90 MM TO DRG. NO. HE/CAST/018 DET 3& QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008. C Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) TRUMPET LINER FOR DPICM WARHEAD AS PER THE ARDE DRG NO 86030304020100200DB Description : TRUMPET LINER FOR DPICM WARHEAD AS PER THE ARDE DRG NO 86030304020100200DB() Specification : TRUMPET LINER FOR DPICM WARHEAD AS PER THE ARDE DRG NO 86030304020100200DB C Estab
Category : p
Grade : 3
Size : O
386 EKTA ENTERPRISES SOLE SELLING AGENT OF M/S NARROW TEX (INDIA) KANPUR
128/296,H2 BLOCK , KIDWAI NAGAR KANPUR UTTAR PRADESH
PIN1 : 208001
Phone No. : M.8090707171
GSTIN : 09ADNPA2652C1ZW 		ADNPA2652C

Download 		1Ordnance Equipment Factory Hazaratpur

Name Specification Use Status
1) TAPE NEWAR POLYESTER 13,25 & 50 MM OG() AS PER SPECIFICATION R NOT ESTABLISHED
2) TAPE NEWAR POLYESTER 13 & 25 MM KHAKI() AS PER SPECIFICATION R NOT ESTABLISHED
3) TAPE POLYESTER 12.7 & 25 MM WHITE () AS PER SPECIFICATION R NOT ESTABLISHED
Category : P
Grade : II
Size : S
1Machine Tool Proto Type Factory

[ENR Registration]
Name Specification Use Status
1) 2226509636 TIMBER FIR WOOD Description : 2226509636 TIMBER FIR WOOD() Specification : 2226509636 TIMBER FIR WOOD 3" X 4" X 10' IS 6612:1972, MOISTURE CONTENT 12 % MAXIMUM. TIMBER SHOULD BE FREE FROM OBJECTIONABLE KNOTS. R Estab
2) 2226409615 TIMBER FIR WOOD Description : 2226409615 TIMBER FIR WOOD() Specification : IS 6612:1972, MOISTURE CONTENT 12 % MAXIMUM. TIMBER SHOULD BE FREE FROM OBJECTIONABLE KNOTS. R Estab
3) 2226419381 TIMBER FIR WOOD Description : 2226419381 TIMBER FIR WOOD() Specification : IS 6612:1972, MOISTURE CONTENT 12 % MAXIMUM. TIMBER SHOULD BE FREE FROM OBJECTIONABLE KNOTS R Estab
Category : s
Grade : 3
Size : S
1Ordnance Equipment Factory

Name Specification Use Status
1) BOX CORRUGATED VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
Category : S
Grade : III
Size : O
387 AKSHAY INCORPORATION
D-70, ANGOL INDUSTRIAL ESTATE, UDAYAMBAG, BELGAUM KARNATKA
PIN1 : 590008
Phone No. : 0831-2445555/4203831, MOB-0849496933, FAX NO-0831-4203831, E-mail-sales@protecindia.com
GSTIN : 29AAFFA7246P1ZU 		BLMR06211C

Download 		1Rifle Factory Ishapur

Name Specification Use Status
1) POLYTHENE COVER WITH VOLATILE CORROSIVE INHIBITOR FOR RIFLE 5.56MM INSAS.() AS PER DRAWING E Not Estab.
Category : P
Grade : III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) ALUMINIUM FOIL BAG TO DRG NO.04-44-79000-06137-4, TECH. REQTS. CQA(A) LET. NO.QA 17553/PR/II/26-8-93() DRG NO.04-44-79000-06137-4, TECHNICAL REQUIREMENTS AS PER CQA(A) LETTER. NO. QA 17553/PR/II/26-8-93 C Not Estab.
2) ALUMINIUM FOIL BAG SIZE 250X180MM (FOR PKG OF CYL. 274/DET.27 TO DRG.NO. AFK/SK-190-05() DRG.NO. AFK/SK-190-05 C Not Estab.
Category : P
Grade : III
Size : S
388 RMG ALLOY STEEL LIMITED
PLOT NO-1, G.I.D.C. INDUSTRIAL ESTATE, JHAGADIA-VALIA ROAD, JHAGADIA (REGD OFFICE-TRADE WORLD "B" WING, 9TH FLOOR, KAMALA MILLS COMPOUND, SENAPATI BAPAT MARG, LOWER PAREL-WEST, MUMBAI, PIN-400013) BHARUCH GUJARAT
PIN1 : 393110
Phone No. : 02645-619775/619776,MOB-09638469091, FAX-02645-226841, E-MAIL:-kn_mahadik@remi.welspun.com REGD OFF
GSTIN : 24AAACR2121C1Z9 		MUMR00478C

Download 		1Rifle Factory Ishapur

Name Specification Use Status
1) STEEL BAR 32MM DIA FOR 12 BORE PAG. () AS PER SPECIFICATION R Not Estab.
2) STEEL ROD 38MM DIA FOR 0.315” SPORTING RIFLE. () AS PER SPECIFICATION R Not Estab.
3) STEEL ROD 42MM DIA FOR RIFLE 5.56MM INSAS. () AS PER SPECIFICATION R Not Estab.
Category : P
Grade : I
Size : L
1Heavy Alloys Penetrator Project

Name Specification Use Status
1) STEEL ROD DIA 20 MM TO 200 MM (ROUND DIA) IN HOT ROLLED AND PEELED (BRIGHT BAR) CONDITION ONLY() ASTM/BS/GOST/IS/EN/SE/DIN/SS/ALLOY STEEL C NOT ESTAB
Category : DDP
Grade : I
Size : M
1Ordnance Factory Khamaria

Name Specification Use Status
1) STEEL ROD 41MM FOR MFG. OF SHELL BODY FOR 40MM L/70 (0113000041)() STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013 (REV.NO.3) DESIG SS/C24-A R NOT ESTABLISHED
2) STEEL ROD 32MM GOST TY14-1-2232-77 (0144101032) () STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 X m10 TO SPECN: TY-14-1-2232-77 R NOT ESTABLISHED
Category : P
Grade : II
Size : L
1Ordnance Cable Factory Chandigarh

Name Specification Use Status
1) HOT ROLLED NORMALIZED STEEL WIRE ROD OF ALL TYPES AS PER SPECIFICATION No. BS 970:1983 () AS PER SPECIFICATION No. BS 970:1983 R Not Estab.
Category : P
Grade : III
Size : L
389 MECHTOOL
NIGAM CENTER, ROOM NO 303, 3RD FLOOR 155 LENIN SARANI KOLKATA West Bengal
PIN1 : 700013
Phone No. : 22153048
GSTIN : 19AASFM3905G1ZZ 		AASFM3905G

Download 		1Opto Electronic Factory

Name Specification Use Status
1) CMM220F CON 20CRP CONT LF NO 9001121366[90]() Specification : CMM220F.CON.20CRP CONT CMM220F.CON.20CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 768/ OEM PART NO. 222S20M16 (NICOMATIC) C Nonestab
2) CMM220F CON 28CRP CONT AWG24TO LF NO 9001121369[90]() Specification : CMM220F.CON.28CRP CONT AWG24TO CMM220F.CON.28CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 865/ OEM PART C Nonestab
3) CMM220 FEMALE 26 CONTACTS M16 LF NO 9001121370[90]() Specification : CMM220 FEMALE 26 CONTACTS M16 CMM220 FEMALE 26 CONTACTS M16 FIXING H/W (HARNESS CONNECTOR) AS PER BEL PART NO. 465570650 419/ OEM PART NO. 222S26M16 (NICOMATIC) C Nonestab
4) CMM220F CON 16CRP CONT AWG24TO LF NO 9001121371[90]() Specification : CMM220F.CON.16CRP CONT AWG24TO CMM220F.CON.16CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 671/OEM PART NO.222S16M16 (NICOMATIC) C Nonestab
5) CMM220F CON 10CRP CONT AWG24TO LF NO 9001121372[90]() Specification : CMM220F.CON.10CRP CONT.AWG24TO CMM220F.CON.10CRP CONT.AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 477/ OEM PART NO. 222S10M16 (NICOMATIC) C Nonestab
6) CMM220F CON 08CRP CONT AWG24TO LF NO 9001121373[90]() Specification : CMM220F.CON.08CRP CONT AWG24TO CMM220F.CON.08CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 380/ OEM PART NO. 222S08M16 (NICOMATIC) C Nonestab
7) CMM220F CON 06CRP CONT AWG24TO LF NO 9001121374[90]() Specification : CMM220F.CON.06CRP CONT AWG24TO CMM220F.CON.06CRP CONT AWG24TO 28 (HARNESS CONNECTOR) AS PER BEL PART NO. 465570370 283/ OEM PART NO. 222S06M16 (NICOMATIC) C Nonestab
8) CMM220M CON ST PCB 06CONTACTS LF NO 9001121381[90]() Specification : CMM220M.CON.ST.PCB,06CONTACTS CMM220M.CON.ST.PCB,06CONTACTS, F22 (PCB CONNECTOR) AS PER BEL PART NO. 465570360 292/ OEM PART NO. 221Y06F22 (NICOMATIC) C Nonestab
Category :
Grade : Grade III
Size : S
390 VIDALI ENTERPRISES
GAT NO.249 NATUCHA MALA VILLAGE SHINDEWADI (SHIRWAL), TA.KHANDALA, DIST. SATARA MAHARASHTRA INDIA
PIN1 : 412801
Phone No. : 9960947775 		AAFPL1407R

Download 		1Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 6330901000 SHAPED CHARGE 90 MM E ASSY CONSISTING OF 2 COMPONENTS TODRG NO HE CAST 018 DET 2 AND DET 4 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008 Description : 6330901000 SHAPED CHARGE 90 MM E ASSY CONSISTING OF 2 COMPONENTS TODRG NO HE CAST 018 DET 2 AND DET 4 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008() Specification : SHAPED CHARGE 90 MM (E.ASSY) CONSISTING OF 2 COMPONENTS TODRG. NO. HE/CAST 018 DET 2 & DET 4 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008 C Estab
Category : p
Grade : 3
Size : S
391 MANNA ENGINEERING WORKS
Regd Office:- 432/1, SARAT CHATTERJEE ROAD, BATAITALA, PIN-711103, WORKS FACTORY:- 33/5, SARAT CHATTERJEE ROAD, BELEPOL, HOWRAH WEST BENGAL
PIN1 : 711104
Phone No. : 033-2688-0233, 2688-1381, 2688-0099,FAX NO-033-26880568,MOB-09874343197,E-mail:-mew_amanna@rediffmai
GSTIN : 19AAFFM2493Q1ZI 		CALM07487E

Download 		1Rifle Factory Ishapur

Name Specification Use Status
1) COVER BUSH CLAMP BUTT FOR RIFLE 5.56MM EXCALIBUR. (PLASTIC ITEM)() AS PER DRAWING C Not Estab.
2) COCKING HANDLE (GRIP) FOR 12 BORE PUMP ACTION GUN. (PLASTIC ITEM)() AS PER DRAWING C Not Estab.
3) MAGAZINE ASSEMBLY FOR ASSAULT RIFLE 7.62MM (GHAATAK). () AS PER DRAWING C Non Established
4) MAGAZINE ASSEMBLY FOR PISTOL AUTO 9MM 1A. () AS PER DRAWING. C Non Established
5) FLASH ELIMINATOR FOR RIFLE 5.56MM EXCALIBUR.() AS PER DRAWING. C Non Established
6) TRIGGER (FINISH) FOR 0.32" PISTOL.() AS PER DRAWING. C Non Established
Category : P
Grade : II
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) SCABBARD KOOKRIE BLACK MK-3[71]() Specification : SCABBARD KOOKRIE BLACK MK-3 (DS.CAT.NO. 1095-000075) LEATHER WITH WOOD LINING AND BRASS CHAPE WITH SHEATHS FOR KOOKRIES FOR USE WITH KOOKRIE MK.3/L C Nonestab
Category : p
Grade : Grade III
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) Bayonet 1-A drg .no. 1005-007812 for Rifle 5.56mm Description : Bayonet 1-A drg .no. 1005-007812 for Rifle 5.56mm() Specification : AS PER DRG. C Estab
Category : p
Grade : 3
Size : S
1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) BRASS CASTING (FOR CASING) Description : BRASS CASTING (FOR CASING)() Specification : AS PER DRAWING C Estab
2) LOCATING PIN Description : LOCATING PIN() Specification : AS PER DRAWING C Estab
3) SUPPORT WASHER Description : SUPPORT WASHER() Specification : AS PER DRAWING C Estab
4) SCREW IN FC Description : SCREW IN FC() Specification : AS PER DRAWING C Estab
5) WORM IN FC Description : WORM IN FC() Specification :AS PER DRAWING C Estab
6) WORM WHEEL IN FC Description :WORM WHEEL IN FC() Specification : AS PER DRAWING C Estab
7) INVESTMENT CASTING FOR CASING Description :INVESTMENT CASTING FOR CASING() Specification : AS PER DRAWING C Estab
8) INVESTMENT CASTING FOR COVER Description : INVESTMENT CASTING FOR COVER() Specification :AS PER DRAWING C Estab
Category : dp
Grade : 3
Size : S
1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) BRASS CASTING (FOR CASING) Description : BRASS CASTING (FOR CASING)() Specification : AS PER DRAWING C Estab
2) LOCATING PIN Description : LOCATING PIN() Specification : AS PER DRAWING C Estab
3) SUPPORT WASHER Description : SUPPORT WASHER() Specification : AS PER DRAWING C Estab
4) SCREW IN FC Description : SCREW IN FC() Specification : AS PER DRAWING C Estab
5) WORM IN FC Description : WORM IN FC() Specification :AS PER DRAWING C Estab
6) WORM WHEEL IN FC Description :WORM WHEEL IN FC() Specification : AS PER DRAWING C Estab
7) INVESTMENT CASTING FOR CASING Description :INVESTMENT CASTING FOR CASING() Specification : AS PER DRAWING C Estab
8) INVESTMENT CASTING FOR COVER Description : INVESTMENT CASTING FOR COVER() Specification :AS PER DRAWING C Estab
Category : dp
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) CATCH COCKING HANDLE (MOULDING) DRG. No. CQA SK-998 Description : CATCH COCKING HANDLE (MOULDING) DRG. No. CQA SK-998() Specification : AS PER DRG. C Estab
2) Bayonet for Carbine Machine 9MM 1A Description : Bayonet for Carbine Machine 9MM 1A() Specification : BAYONET,NO.5,MK-1/LA,DRG./DS CAT NO. 1005-000951 FOR CARBINEMACHINE 9MM 1A/1A1 DC(I) NO. 26377-SA, DT. 13.9.07 C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) CATCH COCKING HANDLE (MOULDING) DRG. No. CQA SK-998 Description : CATCH COCKING HANDLE (MOULDING) DRG. No. CQA SK-998() Specification : AS PER DRG. C Estab
2) Bayonet for Carbine Machine 9MM 1A Description : Bayonet for Carbine Machine 9MM 1A() Specification : BAYONET,NO.5,MK-1/LA,DRG./DS CAT NO. 1005-000951 FOR CARBINEMACHINE 9MM 1A/1A1 DC(I) NO. 26377-SA, DT. 13.9.07 C Estab
Category : p
Grade : 3
Size : S
392 ORIENTAL INSULATORS
SHED NO. 30-B, HSIDC SECTOR-31 FARIDABAD Haryana
PIN1 : 121003
Phone No. : 2276269
GSTIN : 06AELPC4240H1ZU 		AELPC4240H

Download 		1Ordnance Factory Dehradun

Name Specification Use Status
1) CASE CARRYING SNV MCT 2015 3 COMPLETE[74]() Specification : CASE CARRYING SNV 5.56 MM LMG(INSAS) TO DRG. NO. MCT-2015/3 , COMPLETE,CASE CARRYING SNV 5.56MM LMG(INSAS) 101A TO DRG.NO.:MCT-2015/3 (COMPLETE) CONSISTING OF MCT-1369,MCT-1370,MCT-1375, MCT-1376,MCT-1380,MCT-1617/1,MCT-1636/1, MCT-1637/1 C Nonestab
2) Case Carrying FRP IRDE 2610[74]() Specification : Case Carrying FRP IRDE 2610 C Nonestab
Category :
Grade : Grade III
Size : S
393 ACE ENGINEERING CO.
Fl no 201 Siddhartha towers bld no 2 near sangam press pune Maharashtra
PIN1 : 411038
Phone No. : 25421991
GSTIN : 27ARVPG6228N1Z0 		ARVPG6228N

Download 		1High Explosive Factory

Name Specification Use Status
1) RING ARMING[10]() Specification : CQA(A) DRG NO ITW 51 C Estab
Category : p
Grade : Grade III
Size : S
1High Explosive Factory

Name Specification Use Status
1) KEY AMMUNITION[10]() Specification : 19 B DESGN.REF NO. CIA/AMN/1373 PT.NO.IUX 96 A DC 33857-A C Nonestab
2) FILLING HOLE PLUG[10]() Specification : DESIGN.REF CIA/AMN/1799 DET NO. 8 PART NO. ITW 69 DC 35817-A ,SPECN. NO. CQA(A) 1504(E) DC 35870-A C Nonestab
3) RETAINING PIN & RING[10]() Specification : DES REF NO.CIA/AMN/1799 DET NO.6 PT NO. ITW 10 SA DC 35817-A SPECN:CQA(A) 1504(E) DC 35870-A C Nonestab
4) STRIKER SPRING DET 7[10]() Specification : CIA/AMN/1799 DET NO. 7 DRG PT NO ITW 68 DC 36416-A DC NO. 37204-A DATED 20/02/2009 SPECN NO. CQA(A) - 1504(E) DC 35870-A C Nonestab
5) CENTRE PIECE DET 2 PT[10]() Specification : REF.NO. CIA/AMN/1799 DET NO. 2 PT.NO. ITW-64 DC 35817-A SPECN CQA(A) 1504(E) DC 35870-A C Nonestab
6) STRIKER LEVER (FOR HAND GRENADE)[10]() Specification : CQA(A) DRG.NO. ITW/6 GE AND PART NO. ITW/67 C Nonestab
7) BASE PLUG(DES)[10]() Specification : REF NO. CIA/AMN/1799 DET.NO.4 PT NO. ITW 66 DC 36852-A DT 23.09.2002 SPECN. CQA(A) 1504(E) 35870-A C Nonestab
Category : p
Grade : Grade III
Size : S
1High Explosive Factory

Name Specification Use Status
1) TUBE LAUNCHING 1A[10]() Specification : AS PER HEF SPECIFICATION DRG.NO.ITW 6A C Estab
2) EMPTY DRUMS 200 LTR[10]() Specification : IS : 1783(PART -1 , GRADE "A") 1993(3 RD REVISION) , REAFFIRMED 2014 E Nonestab
3) GI CONTAINER FOR COMBUSTIBLE CARTRIDGE CASE[10]() Specification : PROJECT 02/ F2 / GI CONTAINER DT.27.01.2018 C Estab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) PIN 41 point 7MM DIA X 280MM LONG TO DRG CAT NO 1291 B DC ES14 244 DT 9 7 86 DULY GALVANISED AND CHROMATISED 14 5314 000641[00]() Specification : PIN 41.7MM DIA X 280MM LONG TO DRG.CAT.NO.1291/B. DC. ES14/244 DT.9.7.86 DULY GALVANISED AND CHROMATISED 14/5314/000641 C Nonestab
2) ROLLER LAUNCHING ASSY TO CAT SECTION CAT PART NO 14 5420 000160 DRG NO S 393 68[00]() Specification : ROLLER, LAUNCHING ASSY. TO CAT SECTION & CAT/PART NO.14/5420-000160 & DRG/NO/S-393/68. C Nonestab
3) PIN CONNECTING TO CAT SECTION CAT PART NO 14 5315 001704 AND DRG CAT NO 23705[00]() Specification : PIN CONNECTING TO CAT SECTION CAT/PART NO 14/5315-001704 AND DRG/ CAT NO 23705 C Nonestab
4) ROPE DRUM PEDESTAL TO CAT SECTION AND CAT PARTNO E3 3990 000040 AND DRG CAT NO ESK 3035[00]() Specification : ROPE DRUM PEDESTAL TO CAT SECTION & CAT/PARTNO.E3/3990-000040 AND DRG/CAT NO.ESK-3035 C Nonestab
5) COUPLING SHAFT TO CAT SECTION AND CAT PART NO 14 5420 000020 AND DRG CAT NO 23710[00]() Specification : COUPLING SHAFT TO CAT SECTION & CAT/PART NO.14/5420-000020 AND DRG/CAT NO.23710 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) ANCHOR GUARD PLATE TO CAT SECTION AND CAT PART NO 14 5420 000214 AND DRG NO 24034[00]() Specification : ANCHOR GUARD PLATE TO CAT SECTION & CAT/PART NO.14/5420-000214 AND DRG.NO.24034 C Nonestab
2) NUT COUPLING TO CAT SECTION AND CAT PART NO 14 5420 000018 AND DRG CAT NO 23704[00]() Specification : NUT COUPLING TO CAT SECTION AND CAT PART NO 14 5420 000018 AND DRG CAT NO 23704 C Nonestab
3) WINCH RAMP ASSY RH TO CAT SECTION and CAT PART NO 14 5420 000138 AND DRG CAT NO 23709 B[00]() Specification : WINCH, RAMP ASSY. RH TO CAT SECTION & CAT/PART NO.14/5420-000138 AND DRG./CAT NO.23709/B C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) WOODEN STIDE CAT PART No 14 5420 000093 To Drg No ISK 0324[00]() Specification : WOODEN STIDE CAT PART No 14 5420 000093 To Drg No ISK 0324 R Estab
2) BAG Plug to CAT SECTION AND CAT PART No 14 5420 000091 and Drg CAT No 14 247[00]() Specification : BAG Plug to CAT SECTION AND CAT PART No 14 5420 000091 and Drg CAT No 14 247 R Estab
3) BAG repair to CAT SECTION AND CAT PART No 14 5420 000092 and Drg CAT No14 246[00]() Specification : BAG repair to CAT SECTION AND CAT PART No 14 5420 000092 and Drg CAT No14 246 R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) FLANGE ASSEMBLY FOR KM FLOAT Cat Part No 14 5420 000100 to Drg No IMSA 0154[00]() Specification : FLANGE ASSEMBLY FOR KM FLOAT Cat Part No 14 5420 000100 to Drg No IMSA 0154 R Estab
2) CAP VALVE Cat Part No 14 5420 000061 to Drg No EPD 4548 C[00]() Specification : CAP VALVE Cat Part No 14 5420 000061 to Drg No EPD 4548 C R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) WRENCH VALVE Cat Part No 14 5120 002908 to Drg No EPD 4549 B[00]() Specification : WRENCH VALVE Cat Part No 14 5120 002908 to Drg No EPD 4549 B C Estab
2) PATCH VALVE Cat Part No 14 5420 000067 ASSY to Drg No IMSA 0156[00]() Specification : PATCH VALVE Cat Part No 14 5420 000067 ASSY to Drg No IMSA 0156 C Estab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) NOZZLE TO DRG NO NASK 776 2 1 DATED 15 07 15[62]() Specification : NOZZLE TO DRG. NO. NASK-776/2/1 DATED 15-07-15. C Estab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) Baffle Plate[00]() Specification : BAFFLE PLATE TO DNAI DRG.NO.NASK-776/3.R.NO.4 DT.05.06.2002 C Estab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) INSERT VALVE FOR KM FLOAT CAT PART NO 14 5420 000101 TO DRG NO IMSA 0155 D[00]() Specification : INSERT VALVE FOR KM FLOAT CAT/PART NO. 14/5420-000101 TO DRG . NO. IMSA-0155/D C Estab
2) MACHINE PULLING AND LIFTING UNIVERSAL 3 TONNE 1A to CAT SECTION CAT PART No E3 3990 000001 TO SPECN NO CQAE 3990 1427 C[00]() Specification : MACHINE, PULLING AND LIFTING UNIVERSAL 3 TONNE, 1A to CAT SECTION & CAT/PART No. E3/3990-000001 TO SPECN.NO. CQAE/3990/1427 /C C Estab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) LOCKING LEVER JM LEVER CAT NO 14 5120 002904 TO DRG NO 24219 Description : LOCKING LEVER JM LEVER CAT NO 14 5120 002904 TO DRG NO 24219() Specification : LOCKING LEVER JM LEVER CAT NO 14 5120 002904 TO DRG NO 24219 C Estab
Category : dp
Grade : 3
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6334402100 LINER FOR HDC-II DRG.HEMRL/1438,D-5[63]() Specification : LINER TO DRG.NO. HEMRL/MISC/SK/ NO/ 1438 DET.NO. 5 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6192500141FUZE B 25M EMPTY FOR 140MM ROCKET DRG NO NASK 778 P DT 07 OCT 2002[61]() Specification : FUZE B 25M EMPTY FOR 140MM ROCKET DRG NO NASK 778 P DT 07 OCT 2002 R Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) FUZE DA 162 MK9 M1 BRASS WITH CAP[63]() Specification : SPECN NO. CQA(A) 0917 (N) C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817[99]() Specification : 81 MM PRIMER BODY TO DRG NO. IQX 861DC NO 36304-A DT. 03/07/97, SPECIFICATION OF MATERIAL, PROTECTIVE FINISH AND OTHER GENERAL REQUIREMENT TO THE COMPONENT AS PER SPECIFICATION MENTIONED IN DRG NO. IQX861DC NO 36304-A DT. 03/07/97 & 04/ C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) BODY UPPER FOR 81 MM ILLG. MK-II [62]() Specification : DRG. NO. ARDE 2222 DET 2 PT NO ITV 254 SPECN : CQA(A) 2345 (C) C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) SHELL 001 FOR 81MM SMOKE 3D6[62]() Specification : DRAWING NO.4-26941 DET 001 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) BODY LOWER FOR 81MM ILLG. MK-II[62]() Specification : DRG NO ARDE 2222 DET 3 PT NO ITV 255DC-36852A DT. 23/09/2002 SPECN. NO. CQA(A) 2345(C) DC-36513A DATED 25.1.99. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) SLIDE SHOE TO DRG NO 301075223 AS PER DC37448 A DATED 18032017 Description : SLIDE SHOE TO DRG NO 301075223 AS PER DC37448 A DATED 18032017() Specification : SLIDE SHOE TO DRG NO 301075223 AS PER DC37448 A DATED 18032017 C Estab
Category : dp
Grade : 3
Size : S
394 MICRO PHOTO FILMS
13-A, ARYA NAGAR, AMBALA CANTT, HARYANA
PIN1 : 133001
Phone No. : 0171-2662424, FAX: 0171-2662325
GSTIN : 06ABZPA5955E1ZE 		RTKA06526C

Download 		1Ordnance Factory Khamaria

Name Specification Use Status
1) SILVER NITRATE() SILVER NITRATE PURE TO SPECN:-IS-2214:1977 [FIRST REV] (Reaffirmed-2003). R NOT ESTABLISHED
2) SILVER SULPHATE() AS PER SPECIFIED SPECIFICATION R NOT ESTABLISHED
3) SILVER CHLORIDE() AS PER SPECIFIED SPECIFICATION R NOT ESTABLISHED
4) TIN METAL() AS PER SPECIFIED SPECIFICATION R NOT ESTABLISHED
5) AMMONIUM MOLYBDATE() AS PER SPECIFIED SPECIFICATION R NOT ESTABLISHED
6) POTASSIUM IODIDE() AS PER SPECIFIED SPECIFICATION R NOT ESTABLISHED
7) MERCURIC CHLORIDE() AS PER SPECIFIED SPECIFICATION R NOT ESTABLISHED
8) CADMIUM CHLORIDE() AS PER SPECIFIED SPECIFICATION R NOT ESTABLISHED
9) PHOTOGRAPHIC FILMS (ALL TYPES)() AS PER SPECIFIED SPECIFICATION R NOT ESTABLISHED
Category : P
Grade : II
Size : S
1Ordnance Factory Chanda

[ENR Registration]
Name Specification Use Status
1) 1001712406 SILVER NITRATE (SPCL GR) IS-2214-1977 Description : 1001712406 SILVER NITRATE (SPCL GR) IS-2214-1977() Specification : IS: 2214-1977 (FIRST REVISION) REAFFIRMED-2003 P Estab
Category : p
Grade : 3
Size : S
395 TECHNOCRATS INDIA
W-47, MIDC INDUSTRIAL ESTATE, VILLAGE DIGDOH, HINGNA, NAGPUR, MAHARASHTRA
PIN1 : 440016
Phone No. : MOBILE NO. 9820010461, 9820028890
GSTIN : 27AABFT5634L1ZV 		MUMT07277E

Download 		1Ordnance Factory Khamaria

Name Specification Use Status
1) PRF FOR 30MM AK-630 PRACTICE NAVAL AMMN. (9911358280)() PLUG REPRESENTING FUZE (PRF) TO DRG.NO. NAI(J) 550/1/2 (P) FOR 30 MM AK-630 PRACTICE NAVAL AMMN. C NOT ESTABLISHED
2) BOOSTER CUP & PIN FOR 84MM HEAT-551 (9911358084)() BOOSTER CUP TO DRG.NO. TRD-2-2-2277 PIN TO DRG.NO. TRD-1-2-2278 C NOT ESTABLISHED
3) CATCH LOCK ASSY DRG NO.IA-1053 4 CO (9911358061)() CATCH LOCK ASSY AS PER DRG NO. IA-1053 SHT 1, SHT 2, SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH, 2-LINK, 3-HOOK PLATE, 4-HASP C NOT ESTABLISHED
Category : P
Grade : II
Size : S
1Ordnance Factory Bolangir

Name Specification Use Status
1) PRIMER ELECTRIC IA_/L/EMPTY () CQA(A) DRG.PART NO.IQX 46GE,DC NO.36662-A, DT.23.03.2000 C Not Estab
Category : P
Grade : I
Size : S
1Ordnance Factory Khamaria

[ENR Registration]
Name Specification Use Status
1) SHUTTER PLATE TBRL LF NO 9911358300 Description : SHUTTER PLATE TBRL LF NO 9911358300() Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0 C Nonestab
Category : p
Grade : 3
Size : S
1Ordnance Factory Bolangir

Name Specification Use Status
1) NOSE FUZE TYPE A 670M (EMPTY) FOR 30MM BMP-II AMMN.() CQA(A) DRG.NO.bw.3.140.039.cb/c,DC-34241-A,DT.24.9.87(IN LOOSLY ASSEMBLED CONDITION) CONSISTING OF VARIOUS COMPONENTS AS PER ENCLOSED LIST(PASSED PROOF). PROGRAMME AND TEST PROCEDURE AS PER ALBUM NO. D-2040,SHEET NO.Bw.3.140.039 II M/c (12 SHEETS) DC-3424 C Not Estab
Category : P
Grade : II
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6330685102 ELECTRIC FUZE UNCHARGED EMPTY[63]() Specification : ELECTRIC FUZE UNCHARGED ( EMPTY) TO DRG NO. 3-027321 CD 8 C Nonestab
2) 6206500061 MINE DRILL A T 1A ND EMPTY WITHOUT FUZE DRILL MINE A T 1C NDTO DES REF NO CIA AMN 2255 DRG PT NO ITX 11 GEDC NO 37050 A DTD 19 04 06 SPECN NO CQA 1801 D DC 37050 ADT 19 04 06[62]() Specification : MINE DRILL A.T.1A ND EMPTY WITHOUT FUZE DRILL MINE A/T 1C NDTO DES. REF. NO. CIA/AMN/2255, DRG. PT. NO. ITX 11 GEDC NO. 37050-A DTD 19/04/06,SPECN NO.CQA 1801(D) DC 37050-ADT.19/04/06. C Nonestab
3) 6330685103 ET FUZE TURBO ASSEMBLY FOR DPICM WARHEAD TO DRG NO 1202 01 00 00 00 000 11DA AS PER QAP NO ARDE AE ET FUZE TURBO MECHSECT QAP 1 PROVISIONAL[63]() Specification : ET FUZE TURBO ASSEMBLY FOR DPICM WARHEAD TO DRG.NO. 1202 01 00 00 00 000 11DA AS PER QAP NO.ARDE/AE/ET FUZE/TURBO/MECHSECT/QAP-1 (PROVISIONAL) C Nonestab
4) 6356000102 FUZE FOR ADRUSHY MINE MK II ASSY[63]() Specification : FUZE FOR ADRUSHY MINE MK II (ASSY) TO ARDE DRG NO 9707 00 0200 00 000 00TB AND AS PER SCOPE OF WORK C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) SHELL HEI EMPTY 30MM BMP II LF 9911358129[99]() Specification : BODY EMPTY WITH BAND ASSY TO DRG NO.bw5.500.009Cb/c 2 SHEETSSHEET-1 DC-37321-A DT 18-10-12 SHEET-2 DC- 34241-ADT.24/09/87 SPECN.PROGRAMME AND METHOD OF TESTING AS PERSHEET NO.5w5.500.112 M/C (5 SHEET) DC-34241-A DT.24-9-87. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) BOOSTER CUP & PIN FOR 84MM HEAT-551[99]() Specification : SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ). C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) TRACER BODY DRG NO.F1334-154780-D[99]() Specification : TRACER BODY TO DRG NO.F-1334-154780-D, DC-36534-A DT.6/3/99 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Nalanda

Name Specification Use Status
1) PLASTIC FILM BAG FOR M-92[64]() Specification/ Drawing No. OFN/BMCS/M92/ Plastic Film Bag C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Bolangir

Name Specification Use Status
1) SCUFF PROTECTOR[62]() Specification : SCUFF PROTECTOR TO DRG.NO:155-1110 DC NO.37025-A,DT.08.08.05. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Nalanda

Name Specification Use Status
1) PLASTIC FILM BAG FOR M-91[64]() Specification : AS ATTACHED DOCUMENTS C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Nalanda

Name Specification Use Status
1) PLASTIC FILM SLEEVE FOR M-92[64]() Specification : AS PER ATTACHED FILE C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY[63]() Specification : SPECN. NO. CQA(A) 0917 C Nonestab
2) 6331800200 FUZE PERCN DA NO 162 MK-9(M-1)EMPTY[63]() Specification : SPECN.NO. CQA(A) 0917 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6330604970 PLUG REPRESENTING FUZE B429[63]() Specification : PLUG, REPRESENTING, FUZE B 429, B TO DRG. PART NO. ISX 266 DC 35494-A. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 1410052010 CUP AND CAP FOR FUZE B429E[14]() Specification : CUP & CAP FOR MAGAZINE TO DRG. NO. PROP/SK-443 FOR RECTIFICATION OF FUZE B-429E. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6192500141FUZE B 25M EMPTY FOR 140MM ROCKET DRG NO NASK 778 P DT 07 OCT 2002[61]() Specification : FUZE B 25M EMPTY FOR 140MM ROCKET DRG NO NASK 778 P DT 07 OCT 2002 R Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) FUZE PERCUSSION D.A. 5A (EMPTY) DRG. NO. ARDE 2236 SHEET NO 2 PART NO IQX 79 GE SPECN NO CQA(A) 0922[63]() Specification : CQA(A) 0922 C Nonestab
2) FUZE PERCN DA NO.117 MK 20 EMPTY/COMPLETE/WITH CAP DESGN REF L5/10744/GE/341 PART NO. QX 244 GE AND ITEM LIST FOR QX 244 GE DESGN REF NO.(I.A.6900) L5 / 10744 / GE / 341, SPECN NO. I.A. 1204[63]() Specification : I.A. 1204 C Nonestab
3) FUZE PERCN.D.A NO. 162 MK-8(M-2) BRASS WITH CAP EMPTY DESIGN.REF.NO. CIA/AMN/273 PT.NO. IQX 35 GE SPECN. NO. CQA(A) 0917[63]() Specification : CQA(A) 0917 C Nonestab
Category : p
Grade : Grade III
Size : S
1Grey Iron Foundry

[ENR Registration]
Name Specification Use Status
1) Machining & Leake Proof Test of Hand Grenads Empty Bodies. Description : Machining & Leake Proof Test of Hand Grenads Empty Bodies.() Specification : Drg. No.ITW-63 C Estab
2) Machining of Lifting Plug. Description : Machining of Lifting Plug.() Specification : As per Drawings. C Estab
Category : p
Grade : 3
Size : S
396 Gola Electronics
A 16/7 Site 4, UPSIDC IND. AREA Sahibabad Ghaziabad Uttar Pradesh
PIN1 : 201010
Phone No. : 4230023
GSTIN : 09ACYPC0880G1ZB 		RAJA99999B

Download 		1Opto Electronic Factory

Name Specification Use Status
1) 7441120942 CHOKE[74]() Specification : CHOKE AS PER SPECN. NO. KR6.050 C Nonestab
2) 7441121051 TRANSFORMER[74]() Specification : TRANSFORMER AS PER SPECN. NO. 9S831.360 C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) TRANSFORMER AL5720031 LF 7440200593[74]() Specification : TRANSFORMER AL5720031 LF 7440200593 C Estab
2) TRANSFORMER IUMK671121007 LF NO 7441120435[74]() Specification : TRANSFORMER IUMK671121007 LF NO 7441120435 C Estab
3) TRASFORMER ASSEMBLY LF NO 7440207020[74]() Specification : TRASFORMER ASSEMBLY Drg No.E161-00MAD2900-R0 TRANSFORMER ASSEMBLY E161-00MAD2900-R0 C Estab
4) TRANSFORMER LF NO 7441121050[74]() Specification : TRANSFORMER Drg No.9S831.250 TRANSFORMER AS PER DRG.NO. 9S831.250 C Estab
5) TRANSFORMER LF NO 7441121184[74]() Specification : TRANSFORMER TO.5-36 Drg No.OUO.472.021 TU TRANSFORMER TO.5-36 AS PER SPE CN NO. OUO.472.021 TU C Estab
6) TRANSFORMER LF NO 7441121186[74]() Specification : TRANSFORMER TOT-84 Drg No.OUO.472.010 TU TRANSFORMER TOT-84 AS PER SPEC N NO. OUO.472.010 TU C Estab
7) TRANSFORMER LF NO 7441121187[74]() Specification : TRANSFORMER TPP 10-40-400 Drg No.OUO.471.000 TU TRANSFORMER TPP 10-40-400 AS P ER SPECN. NO. OUO.471.000 TU C Estab
8) TRANSFORMER LF NO 7441121188[74]() Specification : TRANSFORMER TPP 12-40-400 Drg No.OUO.471.000 TU TRANSFORMER TPP 12-40-400 AS P ER SPECN. NO. OUO.471.000 TU C Estab
9) TRANSFORMER LF NO 7441121189[74]() Specification : TRANSFORMER TPP 272-40-400 Drg No.OUO.471.000 TU TRANSFORMER TPP 272-40-400 AS PER SPECN. NO. OUO.471.000 TU C Estab
10) TRANSFORMER LF NO 7441121766[74]() Specification : TRANSFORMER TO.5-15 Drg No.OUO.472.021 TY TRANSFORMER TO.5-15 AS PER SPE CN. NO. OUO.472.021 TY C Estab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) 7440200816 HEATING RECTIFIER[74]() Specification : 7440200816 HEATING RECTIFIER TO DRG.NO.AL5.121.066,FOR POWER UNIT OF 1G46 C Nonestab
Category :
Grade : Grade III
Size : S
397 SHANTI ARMS-TECH PRIVATE LIMITED
W-23, MIDC INDUSTRIAL AREA HINGA NAGPUR MAHARASHTRA
PIN1 : 440016
Phone No. : 9923001634 		NGPS006229

Download 		1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) NUT ELEVATING FOR MONOPOD ASSEMBLY OF LMG Description : NUT ELEVATING FOR MONOPOD ASSEMBLY OF LMG() Specification : NUT ELEVATING TO DS CAT NO-5310-024602 DC(I) NO. 26955-SA DT. 05.10.16 FOR MONOPOD ASSEMBLY. C Estab
Category : p
Grade : 3
Size : S
398 SHRADDHA ENGINEERING & TECHNOLOGIES
SHREE SAMARTH KRUPA, 38/1/11 RAMBAUG COLONY, RAHATANI, PUNE MAHARASHTRA
PIN1 : 411017
Phone No. : 9730474108
GSTIN : 27BDWPB1498K1ZW 		BDWPB1498K

Download 		1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) DPICM BODY EMPTY FOR DPICM WARHEAD AS PER THE ARDE DRAWING NO 86030304020100100DB Description : DPICM BODY EMPTY FOR DPICM WARHEAD AS PER THE ARDE DRAWING NO 86030304020100100DB() Specification : as per drg C Estab
Category : p
Grade : 1
Size : O
1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) GROUND STAINLESS STEEL ROD TO SPECIFICATION IS 6603 GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 27MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS Description : GROUND STAINLESS STEEL ROD TO SPECIFICATION IS 6603 GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 27MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS() Specification : GROUND STAINLESS STEEL ROD TO SPECIFICATION IS:6603, GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 27MM+/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS R Estab
2) GROUND STAINLESS STEEL ROD TO SPECIFICATION IS 6603 GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 20MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS Description : GROUND STAINLESS STEEL ROD TO SPECIFICATION IS 6603 GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 20MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS() Specification : GROUND STAINLESS STEEL ROD TO SPECIFICATION IS:6603, GR 07Cr18Ni9 IN SOFTENED CONDITION TO SIZE 20MM+/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS R Estab
3) GROUND STEEL ROD TO SPECIFICATION IS 5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 11M 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS HARDNESS 300 to 340HV Description : GROUND STEEL ROD TO SPECIFICATION IS 5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 11M 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS HARDNESS 300 to 340HV() Specification : GROUND STEEL ROD TO SPECIFICATION IS: 5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 11MM+/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS. HARDNESS – 300 to 340HV R Estab
4) GROUND STEEL ROD TO SPECIFICATION IS 5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 17MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS HARDNESS 300 to 340HV Description : GROUND STEEL ROD TO SPECIFICATION IS 5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 17MM 0 POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS HARDNESS 300 to 340HV() Specification : GROUND STEEL ROD TO SPECIFICATION IS:5517 GR 40Ni6Cr4Mo3 IN HARDENED CONDITION TO SIZE DIA 17MM+/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS.HARDNESS – 300 to 340HV R Estab
5) BRASS ROD TO SPECIFICATION IS 4170 GRADE CUZN40 IN AS MANUFACTURED CONDITION TO SIZE 3MM DIA O POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS Description : BRASS ROD TO SPECIFICATION IS 4170 GRADE CUZN40 IN AS MANUFACTURED CONDITION TO SIZE 3MM DIA O POINT 05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS() Specification : BRASS ROD TO SPECIFICATION IS 4170 GRADE CUZN40 IN AS MANUFACTURED CONDITION TO SIZE 3MM DIA +/-0.05MM IN STRAIGHT LENGTH OF 2 TO 3 METERS R Estab
6) COPPER ROD TO SPECIFICATION IS 4171 IN AS MANUFACTURED CONDITION HAVING DIA 5MM 0 POINT 05 MM Description : COPPER ROD TO SPECIFICATION IS 4171 IN AS MANUFACTURED CONDITION HAVING DIA 5MM 0 POINT 05 MM() Specification : COPPER ROD TO SPECIFICATION IS 4171 IN AS MANUFACTURED CONDITION HAVING DIA 5MM+/-0.05MM R Estab
7) WASHER I TO ARDE DRG NO 0901 00 00 00 00 001 00PB Description : WASHER I TO ARDE DRG NO 0901 00 00 00 00 001 00PB() Specification : WASHER-I TO ARDE DRG.NO.0901 00 00 00 00 001 00PB C Estab
8) WASHER II TO ARDE DRG NO 0901 00 00 00 00 002 00PB Description : WASHER II TO ARDE DRG NO 0901 00 00 00 00 002 00PB() Specification : WASHER-II TO ARDE DRG.NO.0901 00 00 00 00 002 00PB C Estab
9) GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN IND ME 951 PROV GRADE A OR MOULDING POWER TO SPECN JSS 9330 05 TYPE I Description : GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN IND ME 951 PROV GRADE A OR MOULDING POWER TO SPECN JSS 9330 05 TYPE I() Specification : GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN IND ME 951 PROV GRADE A OR MOULDING POWER TO SPECN JSS 9330 05 TYPE I R Estab
10) NICKEL CHROMIUM WIRE APPROX 80 20 Ni Cr DIAMETER 0 0305MM NOMINAL RESISITANCE 1481 OHMS 12 5 PERCENT PER METER TO B S 1117 PT 2 1964 TYPE 3 GRADE C4 Description : NICKEL CHROMIUM WIRE APPROX 80 20 Ni Cr DIAMETER 0 0305MM NOMINAL RESISITANCE 1481 OHMS 12 5 PERCENT PER METER TO B S 1117 PT 2 1964 TYPE 3 GRADE C4() Specification : NICKEL CHROMIUM WIRE APPROX 80:20 Ni:Cr DIAMETER 0.0305MM NOMINAL RESISITANCE 1481 OHMS+/-12.5% PER METER TO B.S. 1117 PT 2 1964,TYPE 3 GRADE C4 R Estab
11) TRANSIT CAP TO ARDE DRG NO 0901 00 02 01 00 005 00PB FOR SQUIB HOUSING ASSY EMPTY TO DRG NO 0901 00 00 02 01 000 00PB Description : TRANSIT CAP TO ARDE DRG NO 0901 00 02 01 00 005 00PB FOR SQUIB HOUSING ASSY EMPTY TO DRG NO 0901 00 00 02 01 000 00PB() Specification : TRANSIT CAP TO ARDE DRG.NO. 0901 00 02 01 00 005 00PB (FOR SQUIB HOUSING ASSY (EMPTY) TO DRG.NO. 0901 00 00 02 01 000 00PB) C Estab
12) SAFETY CUP TO DRG NO 0901 00 02 01 00 006 00PB Description : SAFETY CUP TO DRG NO 0901 00 02 01 00 006 00PB() Specification : SAFETY CUP TO DRG.NO.0901 00 02 01 00 006 00PB C Estab
13) CELLULOID DISC TO ARDE DRG NO 0901 00 01 01 00 004 00PB FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB Description : CELLULOID DISC TO ARDE DRG NO 0901 00 01 01 00 004 00PB FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB() Specification : CELLULOID DISC TO ARDE DRG.NO. 0901 00 01 01 00 004 00PB (FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB) C Estab
14) PTFE DISC TO ARDE DRGNO 0901 00 01 01 00 005 00PB FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB Description : PTFE DISC TO ARDE DRGNO 0901 00 01 01 00 005 00PB FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB() Specification : PTFE DISC TO ARDE DRG.NO. 0901 00 01 01 00 005 00PB (FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB) C Estab
15) CUP TO ARDE DRG NO 0901 00 01 01 00 007 00PB FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB Description : CUP TO ARDE DRG NO 0901 00 01 01 00 007 00PB FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB() Specification : CUP TO ARDE DRG.NO. 0901 00 01 01 00 007 00PB (FOR CARTDIGE BODY EMPTY ASSY 0901 00 01 01 00 000 00PB) C Estab
Category : p
Grade : 3
Size : O
399 PLASTO CHEM PVT. LTD.
PLOT-J1, BLOCK-GP, SECTOR-V, SALTLAKE ELECTRONIC COMPLEX, KOLKATA, WESTBENGAL
PIN1 : 700091
Phone No. : 033-2357 3243, 2357 4428 FAX: 033-4006 0097
GSTIN : 19AABCP9014F1ZH 		CALP01525G

Download 		1Ordnance Factory Khamaria

Name Specification Use Status
1) SET OF 3 SECONDAY COMPT IS-412, 413, (9911357017)() SECONDARY COMBUSTIBLE CARTG CASE, SET OF 3 COMPONENTS:- (1) COM-BUSTIBLE SLEEVE FOR FRONT CARTG. TO DRG PT NO ISX-412, DC NO-36698-A DT 14/8/2K (2) COMBUSTIBLE CAP FOR FRONT CARTG TO DRGPT.NO. ISX-413 DC 36698-A DT 14/8/2K (3) COMBUSTIBLE BODY FORFRONT CA C NOT ESTABLISHED
2) AFT CLOSURE INSULATOR (HEAT-551) (9911357864)() DRG NO.TRD-2-2-2243 C NOT ESTABLISHED
3) DIAPHRAGM TO DRG.NO.TRD-2-2-2244. (9911357863)() DRG.NO.TRD-2-2-2244 C NOT ESTABLISHED
4) SEALING RING TO DRG.NO.TRD-1-2-2246 (9911357874)() DRG.NO.TRD-1-2-2246 C NOT ESTABLISHED
5) SLIDING RING TO DRG.NO.TRD-1-2-2264 (9911357851)() DRG.NO.TRD-1-2-2264 C NOT ESTABLISHED
6) TWIN CONTAINER 520:9 DRG TRD 422155 (9911357801)() DRG. NO. 02032398/DRG NO.TRD-422155. C NOT ESTABLISHED
7) CARRIER 11A ISV-468 A FOR HE & ILLU. (6573810100)() CARRIER, AMMUNITION 11-A (PLASTIC) TO DRG.PT. NO. ISV-468-A DC-37090-A DT. 27/01/07 TO SPECN: CQA(A)-2804(m) DC-36202-A DT. 07/11/96 C Non Established
Category : P
Grade : III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) MOULDING OF FIRING PIN ASSY TO DRG.NO.9A-621.05.008 IN F/C() AS PER DRG.& SPECIFICATION C NOT ESTAB.
2) MOULDING OF LEAD CONTACT ASSY.TO DRG NO.9-A-621.05.030() AS PER DRG.& SPECIFICATION C NOT ESTAB.
3) SPARE PARTS BOX (PVC) TO PART DRG.NO: F 1303-020620 IN F/c() AS PER DRG & SPECIFICATION C Non Established
4) FACE PAD PART NO.F13O3-OO719O IN F/c() AS PER DRG & SPECIFICATION C Non Established
5) BOX CLEAR ASSY.TO DRG.GF 215087 G (RRB205010) F/C() AS PER DRG & SPECIFICATION C Non Established
6) Plastic Bullet for Cartg.7.62 mm() AS PER DRG & SPECIFICATION C Non Established
7) NYLON MOULDED POLE IN F/C TO DRG. NO. QX-1743 DC(I) NO. 36123-A DT.06/06/96() AS PER DRG & SPECIFICATION C Non Established
Category : P
Grade : II
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) OUTER TUBE FOR PARA FLARE RED() DRG. NO. OFDR/CT/34M/ U-I/A4 (AMENDMENT NO.105 DT.8-3-99) C Not Estab.
2) TOP SAFETY COVER PARA FLARE RED() DRG. NO. OFDR/CT/40/M/U-I/A-3 DT.20/07/2010. C Not Estab.
3) BASE YELLOW FOR PARA FLARE RED() DRG. NO.OFDR/CT/30/M/A-2. DATED 05/11/1996 C Not Estab.
4) BOTTOM SAFETY COVER PARA FLARE RED() DRG. NO.OFDR/CT/41/M/UI/A-3 DATED 20/07/2010. C Not Estab.
5) SUPPORT FOR PARA FLARE RED() DRG. NO OFDR/CT/17/UI/A4 C Not Estab.
6) WASHER FOR PARA FLARE RED() DRG. NO.OFDR/CT/24/U-I/ A-4/R-14 (AMENDMENT NO.88 DATED 9-5-98) C Not Estab.
7) CAP FOR CONTAINER BUOYANT SMOKE() SPECN. NO.DGOF/OFDR/OO8 DRG.NO.OFDR/CT/6/M1/A3 C Not Estab.
8) SPRING HOLDER FOR 81MM ILLG.MK-II() SPECN NO. CQA(A) 2345(C) DRG NO ARDE 2222 DET 7 PT NO ITV 258 C Not Estab.
9) CUP PLASTIC FOR 81MM ILLG. MK-II() SPECN NO.CQA(A) 2345(C) DRG NO ARDE 2222 DET 10 PT NO ITV 262 C Not Estab.
10) CARRIER AMMN 17A FOR 81MM ILLG MK-II() SPECN. NO. CQA(A) 2804 (M) DRG. NO ARDE 2224 PT NO ISV 551A SHEET NO.3 C Not Estab.
11) HALF CUP FOR 81MM ILLG.() DRG. NO.ARDE 2224 DET NO.5 PT.NO.ISV 1930 C Not Estab.
12) RING SEALING FOR 81MM ILLG. MK-II() SPECN. NO. CQA (A) 2345 (C) DRG NO ARDE 2222 DET-13 PT NO ITV 261 C Not Estab.
13) PARACHUTE HOUSING FOR 51MM ILLG.() SPECN. NO. CQA(A) 2328(d) DRG.ARDE 2064 DET NO. 24 PT NO.ITV 240 C Not Estab.
14) DISC FOR BOMB 51 MM PACKING() DRG. NO. OFDR/BOMB 51MM ILLG/SMK/114 C Not Estab.
15) POLY PROPYLENE DISC FOR 51MM SMOKE() DRG NO. CQA(A)/AMN/2868 PT.NO.ITV 252 C Not Estab.
16) CUP (HDPE-TYPE-I) FOR 84 MM ILLG. () SPECN. JSS-9330-03-2014 REV.NO.3 DRG.NO.F-1301-056251-A C Not Estab.
17) TRANSIT PLUG FOR 84 MM ILLG.() DRG.NO. CIA/AMMN/2220 PT NO.ISX 318 DC 37011-A DT 29/4/05 MATERIAL TYPE I TO JSS:9330-O5 : 2012 (REV.NO.1) C Not Estab.
18) HALF CUP FOR 120MM ILLG.() DRG.NO.CIA.AMN/2158 PART NO.ISV 1740 C Not Estab.
19) CABLE HOUSING FOR 120MM ILLG.() DRG NO. ARDE2011, DET 17 PT NO.ITV - 147 C Not Estab.
20) CYLINDER POLYTHENE() DRG NO OFDR/CARTGS-84/R-3/A-3 AMENDMENT NO.111 DTD 21.5.99 C Not Estab.
21) BODY FOR HAND FLARE RED() DRG. NO. OFDR/CT/1/3/M1/A3 LATEST AMENDMENT NO.93 DT.18/8/98. C Not Estab.
22) FLASH TUBE FOR HAND FLARE() SPECN.NO.DGOF/OFDR/004 DRG.NO.OFDR/CT/1/10/A3 C Not Estab.
23) CAP TOP CLOSING FOR HAND FLARE() DRG.NO.OFDR/CT/1/12/A3. C Not Estab.
24) AMMUNITION CONTAINER 69 A/L () DRG.NO.ARDE-2125 DET 3 PT.NO.ISV-533 A ALONGWITH CUP (2 NOS PER CONTAINER) TO DRG.NO. ARDE 2043,DET 5, PT.NO.ISV 1764 C Not Estab.
Category : P
Grade : III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) BODY SUB ASSY.DET.CD-3 TO SK.NO.OTF/SE/010 IN F/C DC 35416-A DT.24/11/92() AS PER DRG.& SPECIFICATION C NOT ESTAB.
Category : P
Grade : II
Size : S
1Ordnance Factory Kanpur

Name Specification Use Status
1) Plastic Plug Fuze Hole 50.8mm for 105mm IFG HE() As per Drg. No. ISX-315 C Not Established
Category : P
Grade : II
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) IMPACT PROTECTOR MUZZLE TO DRG.NO.304063075 (MODIFIED),PART NO.404031082 TO DC NO.19368 DT.13.06.14 IN F/C() AS PER DRG.& SPECIFICATION C NOT ESTAB.
Category : P
Grade : II
Size : S
400 Sterling Packaging
Survey No. 52/2, Near Sai Niwas Society, Undri Chowk, Katraj-Hadapsar Bypass Road, Opposite Colori Society, Pune Undri Chowk Pune Maharashtra
PIN1 : 411061
Phone No. : 9730960383
GSTIN : 27ABZPA4776D1ZB 		ABZPA4776D

Download 		1High Explosive Factory

Name Specification Use Status
1) CORRUGATED FIBRE BOARD BOXES[10]() Specification : HEF/IO/81/2003 DT 20.02.2003 C Nonestab
Category : p
Grade : Grade III
Size : S

Copyright © 2025 - OFB