List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
261 PRECISION ENGINEERING
TSNO.A-8/16/2,3 & 4, METTAKUR ROAD, METTAKUR, YANAM PONDICHERRY
PIN1 : 533464
Phone No. : 0884-2324479/2307378, MOB-09848753585, FAX NO-0884-2306871
GSTIN : 34AAEFP7701P1ZX 		VPNP00547B

Download 		1Rifle Factory Ishapur

Name Specification Use Status
1) FINISHED SLIDE OF 9MM AUTO PISTOL THROUGH CONVERSION ROUTE FROM SLIDE FORGING TO SLIDE FINISH.() AS PER DRAWING C Not Estab.
2) FINISHED SLIDE FOR 9MM AUTO PISTOL.() AS PER DRAWING C Not Estab.
Category : P
Grade : III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) HEAD BREECH BOLT TO DRG NO TEND 2045 required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG. NO.TEND.2045 required for 0.315" Sporting Rifle C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) PREMACHINED BLANK FOR TAR TRUNNION K 4002STR2 COMPONENT AS PER DRG NO TEND 2616STR[70]() Specification : PREMACHINED BLANK FOR TAR TRUNNION K 4002STR2 COMPONENT AS PER DRG NO TEND 2616STR C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]() Specification : SELECTOR LEVER AS PER DRG NO TEND 2573 STAR2 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE C Nonestab
Category :
Grade : Grade III
Size : S
262 SWASTIK PIPE LTD.
1/23-B, ASAFALI ROAD, (WORKS FACTORY- 41KM, DELHI ROHTAK ROAD), ASAUDAH, BAHADUR GARH, DIST- JHAJJAR, HARYANA, PIN-124507 NEW DELHI NEW DELHI
PIN1 : 110002
Phone No. : 011-47471717, FAX NO-011-47471718, MOB NO- 09811111555/09811203329
GSTIN : 06AAACS0322C1Z7 		DELS20841C

Download 		1Rifle Factory Ishapur

Name Specification Use Status
1) STEEL STRIP 1.8MM ± .055 X 270MM ± 0.2 WIDTH FOR 7.62MM ASSAULT RIFLE GHAATAK.() AS PER SPECIFICATION R Not Estab.
Category : P
Grade : II
Size : M
1Ordnance Factory Khamaria

Name Specification Use Status
1) STEEL STRIP 200X1.1MM BS1449 CR2/CS (0121090688)() STEEL STRIP 200 +/-0.5 MM WIDE X 1.10 +/-0.05 MM THICK LENGTH OF 3000mm +/-5mm TO SPECN: BS-1449 PT-I-83 CR-2/CS-2 R NOT ESTABLISHED
2) STEEL STRIP 200X1.1MM IS513/BS1449 (0101063337)() STEEL STRIP 200+/-0.5 MM WIDE X 1.1+/-0.05 MM THICK TO SPECN IS-513-TYPE DD OR BS-1449 PT-I GR-3,CS OR CR R NOT ESTABLISHED
3) STEEL STRIP 100X.5MM/26BG IS513 CR (0133090563)() MILD STEEL STRIP 100+/-1 MM WIDE x 26 BG (0.50MM) THICK IN ROLLS COLD DRAWN ANNEALED BEST SURFACE TYPE D MATT FINISHTO SPECN:-IS-513-2008 (FIFTH REVISION) WEIGHT OF EACH ROLLSHOULD BE BETWEEN 50 KG TO 100 KG. R NOT ESTABLISHED
4) STEEL STRIP 82X0.8MM BS1449/IS513DD (0121060266)() STEEL STRIP 82+/-0.5 MM WIDE X 0.8+/-0.03 MM THICK TO SPECN:IS-513-TYPE-DD OR BS-1449-PT-I-CS-3 SEC-2. R NOT ESTABLISHED
5) STEEL STRIP 85X2.0MM IS-513/BS1449 (0101061530) () STEEL STRIP 85+/- 0.5 MM WIDE X 2 MM THICK TO SPECN:-IS-513 GRADE DD OR EDD IN ANNEALED/SKIN PASSED CONDITION OR BS-1449-Pt-I GR.1 OR 2 OR 3 (CR/CS) R NOT ESTABLISHED
6) SHEET MS 2500X1000X1.6MM IS513CR DD (0121020016)() C.R.SHEETS TO SPECN:IS-513-2008 (FIFTH REVISION)-DD ANNEALED AND SKIN PASSED CONDITION 2500MM X 1000MM X 1.600 MM. R NOT ESTABLISHED
7) SHEET MS 2400X1200X2MM IS-513 CR DD (0121023201)() MILD STEEL SHEET 2400 X 1200 X 2 MM THICK COLD ROLLED TO SPECN. IS-513-1994 (4TH REV.)) GRADE - DD R NOT ESTABLISHED
8) SHEET MS 2500X900X1.25MM IS513 CR O (0133023013)() STEEL MILD SHEET 2500MM x 900MM X 1.25 MM (18 BG) TO SPECN:- IS-513-1994 (FOURTH REVISION) GRADE O COLD ROLLED ANNEALED BEST SURFACE R Non Established
9) MS PLATE 2500 X 1250 MM X 2.5 MM IS-513 (0133023025)() MILD STEEL PLATE 2500 MM X 1250 MM X2.5 MM CONFORMING TO SPECN. IS 1079 R Non Established
Category : P
Grade : II
Size : M
1Ordnance Cable Factory Chandigarh

Name Specification Use Status
1) GALVANIZED STEEL WIRE/ G.I. WIRE () AS PER RELEVANT SUPPLY ORDER R Not Estab.
2) GALVANIZED STEEL TAPE() AS PER RELEVANT SUPPLY ORDER R Not Estab.
3) COLD ROLLED STEEL SHEET/STRIPS() AS PER RELEVANT SUPPLY ORDER R Not Estab.
4) CRC SHEETS() AS PER RELEVANT SUPPLY ORDER R Not Estab.
5) STEEL TUBES/ELECTRIC RESISTANCE WELDED (ERW) PIPES() AS PER RELEVANT SUPPLY ORDER R Not Estab.
6) STEEL STRIP 0.5 mm TO 3.0 mm THICK BRIGHT COLD ROLLED AND ANNEALED() AS PER RELEVANT SUPPLY ORDER R Not Estab.
Category : P
Grade : III
Size : L
1Ordnance Equipment Factory

Name Specification Use Status
1) STEEL MILD SHEETS OR PLATES VARIOUS() AS PER REQUIREMENT & SPECIFICATION R
2) CARBON STEEL STRIP SIZE 1.00 MM THICK X 102 MM WIDE() AS PER REQUIREMENT & SPECIFICATION R
Category : P
Grade : II
Size : M
1Ordnance Factory Bhusawal

Name Specification Use Status
1) CRC SHEETS & STRAPS TO IS-513 (ALL GRADES)/BS-1449 PART-I CS-30, CS-40 ETC. OF ALL SIZES 1.25MM THICK, 1.6MM THICK, 0.8MM THICK & 1.0MM, 0.6MM THICK (0.5 - 3.0MM)() AS PER DRAWING/SPECIFICATION. R ESTAB.
2) HR COILS/HR SHEETS() AS PER DRAWING/SPECIFICATION. R ESTAB.
3) STEEL STRAP 0.5MM TO 3.0MM THICK BRIGHT, COLD ROLLED & ANNEALED() AS PER DRAWING/SPECIFICATION. R ESTAB.
4) STEEL TUBES/ERW PIPES TO IS/BS SPECIFICATION, WELDED STAINLESS STEEL PIPE, HOLLOW SECTIONS() AS PER DRAWING/SPECIFICATION. R ESTAB.
5) GALVANIZED STEEL WIRES() AS PER DRAWING/SPECIFICATION. R ESTAB.
Category : DP
Grade : I
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) STEEL SHEET SIZE 1 25 MM THICK X 900 MM WIDTH X 2500 MM LENGTH TO SPECN IS 513 1994 COLD ROLLED AND ANNEALED TYPE D BEST SURFACE[70]() Specification : STEEL SHEET SIZE 1.25 MM THICK X 900 MM WIDTH X 2500 MM LENGTH TO SPECN IS:513-1994 COLD ROLLED AND ANNEALED TYPE 'D' BEST SURFACE R Estab
Category : dp
Grade : Grade II
Size : M
1Gun Carriage Factory

Name Specification Use Status
1) STEEL SHEET 1 MM THICK X 1000 X 2500 MM LONG TO SPECN IS 1079 1988 GD ST42 OR IS 513 LATEST COLD ROLLED ANNEALED BEST TYPE D[70]() Specification : STEEL SHEET 1 MM THICK X 1000 X 2500 MM LONG TO SPECN IS :1079-1988, GD. ST42 OR IS:513 LATEST COLD ROLLED ANNEALED BEST TYPE D R Estab
Category : dp
Grade : Grade II
Size : M
1Gun Carriage Factory

Name Specification Use Status
1) STEEL SHEET SIZE 3 MM THICK X 1000 MM WIDTH X 2500 MM LONG TO SPECN IS 513 1449 BEST SURFACE TYPE D CRA BS 1994 PT I 72 SECTION 2 CS CORE CRA OR IS 1079 1994 ST34 HOT ROLLED AND ANNEALED OR IS 513 LATEST ISSUE COLD ROLLED AND ANNEALED BEST TYPE D[70]() Specification : SHEET SIZE 3 MM THICK X 1000 MM WIDTH X 2500 MM LONG TO SPECN IS: 513-1994 BEST SURFACE TYPE 'D' (CRA) BS:1449 PT-I-72, SECTION 2 CS CORE (CRA) OR IS:1079-1994 ST34 HOT ROLLED & ANNEALED OR IS:513 LATEST ISSUE COLD ROLLED AND ANNEALED BES R Estab
Category : dp
Grade : Grade II
Size : M
1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET Description : STEEL SHEET() Specification :AS PER SPECIFICATION R Estab
Category : dp
Grade : 3
Size : S
1Ordnance Factory Dumdum

[ENR Registration]
Name Specification Use Status
1) STEEL SHEET Description : STEEL SHEET() Specification :AS PER SPECIFICATION R Estab
Category : dp
Grade : 3
Size : S
263 BALLKINGS
Gill Road, Miller Ganj, Ludhiana-141003 Miller Ganj Ludhiana Punjab
PIN1 : 141003
Phone No. : 5084801
GSTIN : 03ACFPS3268K2ZC 		ACFPS3268K

Download 		1Ordnance Factory Chanda

Name Specification Use Status
1) 6173500300 BALL STEEL ITX-244[61]() Specification : SPECN. JSS 0465-01,CLASS 3 C Estab
Category :
Grade : Grade III
Size : S
264 ARJAN DASS & SONS PVT. LTD
135/15, GRISH GHOSH ROAD, P.O-BELURMATH, HOWRAH, WEST BENGAL
PIN1 : 711022
Phone No. : 033-26555077/26556750, MOB- 09830061106, FAX NO- 033-26556750
GSTIN : 19AAGCA1944A1Z2 		AAGCA1944A

Download 		1Rifle Factory Ishapur

Name Specification Use Status
1) STEEL FLAT 75 X 25 X 15MM FOR TRIGGER OF TEAR GAS GUN.() AS PER SPECIFICATION R Not Estab.
2) STEEL 25MM DIA FOR COCKING PIECE FOR 30-06 SPORTING RIFLE.() AS PER SPECIFICATION R Not Estab.
Category : S
Grade : III
Size : S
1Heavy Alloys Penetrator Project

Name Specification Use Status
1) steel rod 180 mm dia[03]() Specification : STEEL ROD,SPEC:BS-970 GR 817 M40(EN 24)DIA 180(+0/-2.0)MM IN THE LENGTH OF 2M TO 3M R Nonestab
2) steel rod 220 mm dia[03]() Specification : Steel rod as per EN8/ASTM 106 gr.B dia 220 mm(+0/-3.0)mm length * 130(+/-1.0)mm to be supplied in cut lengths R Nonestab
3) STEEL ROD 150 MM DIA[03]() Specification : STEEL ROD, SPEC:BS-970 GR 817 M40 (EN24) DIA 150 (+0/-2)MM IN LENGTHS OF 1M OR ITS MULTIPLES R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) STEEL ROD 32MM 50 TY 14 1 2884 80 LF 0187100032[01]() Specification : STEEL ROD 32(+0.10/-0.00)MM DIA,REELED,GROUND FINISH IN STRAIGHT LENTH OF 2 TO 2.5 MTR.TO SPECN: STEEL GRADE 50TY-14-1-2884-80 WITH PHYSICAL AND CHEMICAL PROPERTIES ASPER SPECN NO.: ML 002 SHT.1 OF1 REVISION NO.3 DATED 23-7-20ENCLOSED.MAT R Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) STEEL ROD 29MM BS-970-817 M40(EN24) (0205100029)[02]() Specification : COLD DRAWN STEEL ROD 29MM+0.07/-0.13 DIA IN STREIGTH LENGTHOF 2 TO 2.5 MTRS TO SPECN.BS-970-817 M40 (EN24) ORIS-5517-1998 (REV.1) 40 Ni 6 Cr4 Mo3 . R Nonestab
2) STEEL ROD 18MM BS970 080M50 CD ANL Lf 0133001165[01]() Specification : STEEL ROD 18+0.05/-0.10 MM DIA TO SPECN:BS-970-PT-I/1983 GR-080M-50 COLD DRAWN & SOFTENED COND.IN ST.LENGTH OF 2.5 TO 3MTRS HARDNESS 207HB(max) MATERIAL TO BE SUPPLIED WITH COLOURCODE,BASE COLOUR-BLACK,1st-BAND WHITE TO SPECN:IS-2049-78(R R Nonestab
3) STEEL ROD 32MM DIA GOST V 10230 75 LF 0184108032[01]() Specification : STEEL ROD 32 [+0.00/-0.10] MM DIA IN STRAIGHT LENGTH OF 2.5 TO 3 MTRS TO SPECN:- GOST-V-10230-75 STEEL GRADE S-35 HGS.(CHEMICAL COMPOSITION AND PHYSICAL PROPERTIES AS PER SPECN.OFK IN HOUSE STD NO.ML :001 SHT 1 OF 1 DATED 11-06-2002.ISSUE R Nonestab
4) STEEL ROD 32MM GOST TY14 1 2232 77 LF 0144101032[01]() Specification : STEEL ROD 32 [+0.00/-0.10] mm DIA STEEL 53 x m10 TO SPECN: TY-14-1-2232-77. IN STRAIGHT LENGTH OF 2 TO 2.5 MTRS WITH CHEMICAL & PHYSICAL PROPERTIES AS PER STEEL SPEC.NO.ML:003SHT 1 OF 1 DATE 17/11/95. EACH ROD SHOULD HAVE ONE END MACHINED R Nonestab
5) STEEL ROD 29MM JSS-9510-01 SS/C-24A (0142000029)[01]() Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED AND GROUND BAR 29.00 MM +0.00/-0.10 MM DIA IN ST. LENGTH OF 2 TO 2.5 METERSTO SPECN.JSS-9510-01:2013 (REV. NO.3) DESIG SS/C-24-A R Nonestab
6) STEEL ROD 29MM IS-1570 GR.40C10S18 (0186000029)[01]() Specification : STEEL ROD 29[+0.075/-0.13] MM DIA IN ST.LENGTH OF 2.5 TO 3.0MTR TO SPECN:IS-1570( PT-III)-1979 (FIRST REVISION)(REAFFIRMED 2004) GR.40C10S18. R Nonestab
7) STEEL ROD 14.5MM IS:4431 14C14S14CD (0133001145)[01]() Specification : STEEL ROD 14.5(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2TO 2.5MTRTO SPECN:IS-4431-1978(REAFFIRMED 2004)1st REV)GRADE 14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-WHITE,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2003)1s R Nonestab
8) STEEL ROD 18 MM JSS:9510-01 SS/D32 (0135300018)[01]() Specification : STEEL ROD 18+0.05/-0.10MM DIA,TO SPECN.SS/D32 TO JSS-9510-01IN NORMALISED CONDITION OR BS-970-PT-1-1983 GRADE O8OM5O INNORMALISED CONDITION,IN ST.LENGTH OF3+/-0.1MTR,HARDNESS 187HB TO 207 HB.MATERIAL TO BE SUPPLIED WITH COLOUR CODE BASECO R Nonestab
9) STEEL ROD 21MM IS4431 GR.14 C14 S14 (0111000021)[01]() Specification : STEEL ROD 21(+0.05/-0.10) MM DIA TO SPECN:- IS-4431-1978 (REAFFIRMED 2014)(FIRST REV.) GR-14 C-14,S-14 IN CD FINISHIN STRAIGHT LENGTH OF 2 TO 2.5 MTRS. R Nonestab
10) STEEL ROD 21MM IS-4431 14C14S14 CD (0133001021)[01]() Specification : STEEL ROD 21(+0.05/-0.10]MM DIA IN ST.LENGTH OF 2 TO 3MTR TOSPECN:IS-4431-1978(REAFFIRMED 2014)(1st REV.)GRADE-14C14S14IN COLD DRAWN COND.MATERIAL COLOUR CODE:BASE COLOUR-BROWN,Ist BAND-GREEN,COLOUR TO SPECN.IS-2049-78(REAFFIRMED 2013)1st R Nonestab
11) STEEL ROD 41MM JSS:9510-01 SS/C24-A (0113000041)[01]() Specification : STEEL FREE CUTTING BRIGHT TURNED, REELED GROUND BAR 41(+0.00/-0.10)MM DIA IN LENGTH OF 2.5TO 3MTR.SPECN-JSS-9510-01-2013(REV.NO.3)DESIG SS/C24-A.MATERIAL SHOULD BE FREE FROM CRACKSFLAWS ROLLING LAPS ETC & SHOULD BE SUBJECTED TO 100% CRACK R Nonestab
Category :
Grade : Grade III
Size : S
265 ELMECH ENTERPRISE
352/1, G.T.ROAD (SOUTH) G.T.ROAD (SOUTH) HOWRAH West Bengal
PIN1 : 711103
Phone No. : 26880894
GSTIN : 19AFNPP8106Q1ZI 		AEWPP9308N

Download 		1Rifle Factory Ishapur

Name Specification Use Status
1) PIN PLUNGER TRIPPING LEVER FOR PISTOL AUTO 9MM 1A[70]() Specification : PIN PLUNGER TRIPPING LEVER FOR PISTOL AUTO 9MM 1A C Nonestab
Category : p
Grade : Grade III
Size : S
266 Precitech Forgings and Engineering Private Limited
Dp-112/4A, (SP),2nd Main Road, Ambattur Industrial Estate Chennai Tamil Nadu
PIN1 : 600058
Phone No. : 26256491
GSTIN : 33AAGCP3288C1ZK 		CHEP13325E

Download 		1Rifle Factory Ishapur

Name Specification Use Status
1) FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045[71]() Specification : FORGING OF T.A. CLAMP OF TA-90 AS PER DRG. NO. RFI SK/10045 C Nonestab
Category : p
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046[71]() Specification : FORGING OF T.A. LINK OF TA-90 AS PER DRG. NO. RFI/SK NO. 10046 C Nonestab
Category : p
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521[70]() Specification : FORGING OF PISTON EXTENSION FOR 7.62 MM ASSAULT RIFLE AS PERDRG. NO. RFI SK NO.9521 C Nonestab
Category : p
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) BLOCK GAS FORGING FOR RIFLE 5 56MM INSAS[70]() Specification : BLOCK GAS FORGING AS PER RFI SK.NO.4813*8-S FOR RIFLE 5.56MM INSAS(WITH FIRM MATERIAL) C Nonestab
Category : p
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) TRIGGER FORGING FOR GHAATAK[70]() Specification : TRIGGER(FORGING DRAWING) FOR 7.62MM ASSAULT RIFLE AS PER DRG NO. RFI SK NO.9504-AR C Nonestab
Category : p
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) BODY(FORGING)TO RFI SK.NO 7470*(DC/RFI NO. 04/010/09)FOR .315 SPORTING RIFLE[70]() Specification : BODY(FORGING)TO RFI SK.NO 7470*(DC/RFI NO. 04/010/09)FOR .315" SPORTING RIFLE C Nonestab
Category : p
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) BOLT BREECH FORGING[70]() Specification : BOLT BREECH FORGING TO DRG NO. RFI SK.3455*2FOR .315" SPORTING RIFLE C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) CONVERSION FORGING TO DRAWING NO 62C 2206 200 D2 FOR BLOCK TRUNNION A2206 MATERIAL WILL BE ISSUED BY OFT[70]() Specification : CONVERSION FORGING TO DRAWING NO. 62C 2206 200 D2 REQUIRD FOR BLOCK TRUNNION (A2206) FOR 12.7 mm AD GUN. MATERIAL WILL BE ISSUED BY OFT C Nonestab
2) CONVERSION FORGING TO DRG NO 62C 2105 200 B3 MATERIAL WILL BE SUPPLIED BY OFT REQD FOR BRACKET ROCKING BAR A2105[00]() Specification : AS PER DRG OF "CONVERSION FORGING TO DRG NO. 62C 2105 200 B3 MATERIAL WILL BE SUPPLIED BY OFT REQD. FOR BRACKET ROCKING BAR (A2105) " C Nonestab
3) CONVERSION FORGING TO DRAWING NO 62C 6018 200 D3 FOR PLATE RIBBED GUIDE SLIDE A6018 MATERIAL WILL BE ISSUED BY OFT[70]() Specification : CONVERSION FORGING TO DRAWING NO. 62C 6018 200 D3 REQUIRED FOR PLATE RIBBED GUIDE SLIDE (A6018) FOR 12.7 mm AD GUN. MATERIAL WILL BE ISSUED BY OFT. " C Nonestab
4) CONVERSION FORGING TO DRG NO 62C 6208 200 C3 FOR SLIDE FEED A6208 MATERIAL WILL BE ISSUED BY OFT[70]() Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 6208 200 C3. MATERIAL WILL BE ISSUED BY OFT FOR SLIDE FEED (A6208). " C Nonestab
5) CONVERSION FORGING TO DRG NO 62C 2032 200 D3 MATERIAL WILL BE ISSUED BY OFT REQUIRED FOR LOCK BARREL A2032[00]() Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 2032 200 D3. MATERIAL WILL BE ISSUED BY OFT REQUIRED FOR LOCK BARREL A2032 " C Nonestab
6) CONVERSION FORGING TO DRG NO 62C 2207 200 B3 REQUIRED FOR GUIDE RIGHT A2207[00]() Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 2207 200 B3. REQUIRED FOR GUIDE RIGHT A2207 " C Nonestab
7) CONVERSION FORGING TO DRG NO 62C 2519 200 D2 MATERIAL WILL BE ISSUED BY OFT REQD FOR ROCKING BAR A2519 6P11 2 19 DSCAT NO 1005 007319[00]() Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 2519 200 D2. MATERIAL WILL BE ISSUED BY OFT REQD.FOR ROCKING BAR A2519 6P11-2-19, DSCAT.NO. 1005-007319 " C Nonestab
8) CONVERSION TO FORGING TO DRG NO 62C 1004 200 C3 MATERIAL WILL BE SUPPLIED BY OFT REQD FOR CHAMBER GAS A1004[00]() Specification : AS PER DRG TO CONVERSION TO FORGING TO DRG.NO.: 62C 1004 200 C3 MATERIAL WILL BE SUPPLIED BY OFT REQD. FOR CHAMBER GAS A1004 C Nonestab
9) FORGING TO DRG No 62C 7003 200 B3 WITH FIRM s MATERIAL REQUIRED FOR SEAR A7003 FOR 127 AD GUN[70]() Specification : FORGING TO DRG No 62C 7003 200 B3 WITH FIRM'S MATERIAL REQUIRED FOR SEAR A7003 FOR 127 AD GUN C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) CONVERSION FORGING TO DRG NO 62C 5012 200 D3 FOR LINK STRIPPER for 12 POINT7 mm Weapon MATERIAL WILL BE ISSUED BY OFT[00]() Specification : CONVERSION FORGING TO DRG NO 62C 5012 200 D3 FOR LINK STRIPPER for 12 POINT7 mm Weapon MATERIAL WILL BE ISSUED BY OFT C Nonestab
2) CONVERSION FORGING TO DRAWING NO 62C 2206 200 D2 FOR BLOCK TRUNNION A2206 MATERIAL WILL BE ISSUED BY OFT[70]() Specification : CONVERSION FORGING TO DRAWING NO. 62C 2206 200 D2 REQUIRD FOR BLOCK TRUNNION (A2206) FOR 12.7 mm AD GUN. MATERIAL WILL BE ISSUED BY OFT C Nonestab
3) CONVERSION FORGING TO DRG NO 62C 2105 200 B3 MATERIAL WILL BE SUPPLIED BY OFT REQD FOR BRACKET ROCKING BAR A2105[00]() Specification : AS PER DRG OF "CONVERSION FORGING TO DRG NO. 62C 2105 200 B3 MATERIAL WILL BE SUPPLIED BY OFT REQD. FOR BRACKET ROCKING BAR (A2105) " C Nonestab
4) CONVERSION FORGING TO DRG NO 62C 6208 200 C3 FOR SLIDE FEED A6208 MATERIAL WILL BE ISSUED BY OFT[70]() Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 6208 200 C3. MATERIAL WILL BE ISSUED BY OFT FOR SLIDE FEED (A6208). " C Nonestab
5) CONVERSION FORGING TO DRG NO 62C 2032 200 D3 MATERIAL WILL BE ISSUED BY OFT REQUIRED FOR LOCK BARREL A2032[00]() Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 2032 200 D3. MATERIAL WILL BE ISSUED BY OFT REQUIRED FOR LOCK BARREL A2032 " C Nonestab
6) CONVERSION FORGING TO DRG NO 2C 2464 200 C3 MATERIAL WILL BE ISSUED BY OFT REQD FOR EJECTOR SMALL ARM CARTRIDGE A2464[00]() Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 2464 200 C3 MATERIAL WILL BE ISSUED BY OFT REQD FOR EJECTOR SMALL ARM CARTRIDGE A2464 " C Nonestab
7) CONVERSION FORGING TO DRG NO 62C 2207 200 B3 REQUIRED FOR GUIDE RIGHT A2207[00]() Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 2207 200 B3. REQUIRED FOR GUIDE RIGHT A2207 " C Nonestab
8) CONVERSION FORGING TO DRG NO 62C 2519 200 D2 MATERIAL WILL BE ISSUED BY OFT REQD FOR ROCKING BAR A2519 6P11 2 19 DSCAT NO 1005 007319[00]() Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 2519 200 D2. MATERIAL WILL BE ISSUED BY OFT REQD.FOR ROCKING BAR A2519 6P11-2-19, DSCAT.NO. 1005-007319 " C Nonestab
9) CONVERSION TO FORGING TO DRG NO 62C 1004 200 C3 MATERIAL WILL BE SUPPLIED BY OFT REQD FOR CHAMBER GAS A1004[00]() Specification : AS PER DRG TO CONVERSION TO FORGING TO DRG.NO.: 62C 1004 200 C3 MATERIAL WILL BE SUPPLIED BY OFT REQD. FOR CHAMBER GAS A1004 C Nonestab
10) CONVERSION FORGING TO DRG NO 64C 3004 200 E3 REQUIRED FOR PISTON TO DRG NO 2A42 03 004 C3004[00]() Specification : AS PER DRG OF CONVERSION FORGING TO DRG NO 64C 3004 200 E3 REQUIRED FOR PISTON TO DRG NO 2A42.03.004 (C3004) C Nonestab
11) CONVERSION FORGING TO DRG NO 64C 5056 200 F3 REQD FOR CONNECTING LINK RIGID TO DRG NO 2A42 05 056 C5056[00]() Specification : AS PER DRG TO CONVERSION FORGING TO DRG. NO. 64C 5056 200 F3 REQD FOR CONNECTING LINK,RIGID TO DRG.NO. 2A42.05.056(C5056) C Nonestab
12) FORGING TO DRG NO 64C 5077 200 F3 REQD FOR LEVER MANUAL CONTROL TO DRG NO 2A42 05 077 C5077[70]() Specification : AS PER DRG TO FORGING TO DRG NO 64C 5077 200 F3. REQD FOR:LEVER MANUAL CONTROL TO DRG.NO. 2A42.05.077 (C5077) C Nonestab
13) FORGING TO DRG NO 64C 5115 200 G3 FIRMS MATERIAL REQD FOR CONNECTING LINK RIGID C5115[70]() Specification : AS PER DRG TO FORGING TO DRG NO. 64C 5115 200 G3. (FIRM'S MATERIAL) REQD FOR: CONNECTING LINK RIGID C5115 C Nonestab
14) CONVERSION FORGING TO DRG NO 64C 5116 200 G2 REQUIRED FOR TRAY TO DRG NO 2A42 05 116 C5116[00]() Specification : AS PER DRG TO CONVERSION FORGING TO DRG. NO. 64C 5116 200 G2 REQUIRED FOR TRAY TO DRG. NO. 2A42.05.116 (C5116) C Nonestab
Category :
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) FORGING FOR BR.BASE TO DS.CAT.NO.1010-00 1323 SHT.6, DESIGN.NO.ARDE-1917 SHT.3.[70]() Specification : FORGING FOR BR.BASE TO DS.CAT.NO.1010-00 1323 SHT.6, DESIGN.NO.ARDE-1917 SHT.3. R Nonestab
Category : p
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) RH EYE FORGING TO 3901010090[39]() Specification : 172.10.330-1/F C Nonestab
2) LH EYE FORGING TO 3901010092[39]() Specification : 172.10.343/F R Nonestab
3) FLANGE FORGING TO 3901023040[39]() Specification : 172.23.105/F R Nonestab
4) RELEASE RING FORGING TO 3901040031[39]() Specification : 172.40.225-1/ R Nonestab
Category :
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) LH EYE FORGING TO 3901010092[39]() Specification : 172.10.343/F R Nonestab
2) FLANGE FORGING TO 3901023040[39]() Specification : 172.23.105/F R Nonestab
3) RELEASE RING FORGING TO 3901040031[39]() Specification : 172.40.225-1/ R Nonestab
Category :
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) STRAP FORGING TO 3901011038[39]() Specification : 188.11.013/F R Nonestab
2) COVER PLATE FORGING TO 3901011042[39]() Specification : 188.11.026/F R Nonestab
3) LOCK FORGING TO 3901011069[39]() Specification : 447A.11.069-2/F C Nonestab
4) HANDLE FORGING TO 3901011072[39]() Specification : 447A.11.086/F R Nonestab
5) HANDLE LOCK FORGING TO 3901011073[39]() Specification : 447A.11.088/F R Nonestab
6) ROD FORGING TO 3901021012[39]() Specification : 187.21.032/F R Nonestab
7) SUPPORT FORGING TO 3901021076[39]() Specification : 188.21.042/F R Nonestab
8) COLLAR FORGING TO 3901021110[39]() Specification : 447.21.036-1/F R Nonestab
9) THRUST PLATE FORGING TO 3901023024[39]() Specification : 172.23.078-1/F R Nonestab
10) BUSHING FORGING TO 3901023030[39]() Specification : 172.23.093/F C Nonestab
11) GEAR FORGING TO 3901023059[39]() Specification : 176.23.112/F R Nonestab
12) GEAR FORGING TO 3901023081[39]() Specification : 176.23.111/F R Nonestab
13) GEAR FORGING TO 3901028039[39]() Specification : 172.28.015-2/F R Nonestab
14) LEVER FORGING TO 3901061018[39]() Specification : 188.61.005/F R Nonestab
15) CLAMP FORGING TO 3901081045[39]() Specification : 187.81.006/F R Nonestab
16) FLANGE FORGING TO 3901218050[39]() Specification : 185.18.056/F R Nonestab
17) WORM WHEEL FORGING TO 3906210119[39]() Specification : 172.27.131/F C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) CONVERSION FORGING TO DRAWING NO 62C 2206 200 D2 FOR BLOCK TRUNNION A2206 MATERIAL WILL BE ISSUED BY OFT[70]() Specification : CONVERSION FORGING TO DRAWING NO. 62C 2206 200 D2 REQUIRD FOR BLOCK TRUNNION (A2206) FOR 12.7 mm AD GUN. MATERIAL WILL BE ISSUED BY OFT C Estab
2) CONVERSION FORGING TO DRG NO 62C 2105 200 B3 MATERIAL WILL BE SUPPLIED BY OFT REQD FOR BRACKET ROCKING BAR A2105[00]() Specification : AS PER DRG OF "CONVERSION FORGING TO DRG NO. 62C 2105 200 B3 MATERIAL WILL BE SUPPLIED BY OFT REQD. FOR BRACKET ROCKING BAR (A2105) " C Estab
3) CONVERSION FORGING TO DRG NO 62C 2032 200 D3 MATERIAL WILL BE ISSUED BY OFT REQUIRED FOR LOCK BARREL A2032[00]() Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 2032 200 D3. MATERIAL WILL BE ISSUED BY OFT REQUIRED FOR LOCK BARREL A2032 " C Estab
4) CONVERSION FORGING TO DRG NO 2C 2464 200 C3 MATERIAL WILL BE ISSUED BY OFT REQD FOR EJECTOR SMALL ARM CARTRIDGE A2464[00]() Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 2464 200 C3 MATERIAL WILL BE ISSUED BY OFT REQD FOR EJECTOR SMALL ARM CARTRIDGE A2464 " C Estab
5) CONVERSION FORGING TO DRG NO 62C 2207 200 B3 REQUIRED FOR GUIDE RIGHT A2207[00]() Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 2207 200 B3. REQUIRED FOR GUIDE RIGHT A2207 " C Estab
6) CONVERSION FORGING TO DRG NO 62C 2519 200 D2 MATERIAL WILL BE ISSUED BY OFT REQD FOR ROCKING BAR A2519 6P11 2 19 DSCAT NO 1005 007319[00]() Specification : AS PER DRG OF "CONVERSION FORGING TO DRG.NO.: 62C 2519 200 D2. MATERIAL WILL BE ISSUED BY OFT REQD.FOR ROCKING BAR A2519 6P11-2-19, DSCAT.NO. 1005-007319 " C Estab
7) CONVERSION TO FORGING TO DRG NO 62C 1004 200 C3 MATERIAL WILL BE SUPPLIED BY OFT REQD FOR CHAMBER GAS A1004[00]() Specification : AS PER DRG TO CONVERSION TO FORGING TO DRG.NO.: 62C 1004 200 C3 MATERIAL WILL BE SUPPLIED BY OFT REQD. FOR CHAMBER GAS A1004 C Estab
8) CONVERSION FORGING TO DRG NO 64C 3004 200 E3 REQUIRED FOR PISTON TO DRG NO 2A42 03 004 C3004[00]() Specification : AS PER DRG OF CONVERSION FORGING TO DRG NO 64C 3004 200 E3 REQUIRED FOR PISTON TO DRG NO 2A42.03.004 (C3004) C Estab
9) FORGING TO DRG NO 64C 5077 200 F3 REQD FOR LEVER MANUAL CONTROL TO DRG NO 2A42 05 077 C5077[70]() Specification : AS PER DRG TO FORGING TO DRG NO 64C 5077 200 F3. REQD FOR:LEVER MANUAL CONTROL TO DRG.NO. 2A42.05.077 (C5077) C Estab
10) CONVERSION FORGING TO DRG NO 64C 5116 200 G2 REQUIRED FOR TRAY TO DRG NO 2A42 05 116 C5116[00]() Specification : AS PER DRG TO CONVERSION FORGING TO DRG. NO. 64C 5116 200 G2 REQUIRED FOR TRAY TO DRG. NO. 2A42.05.116 (C5116) C Estab
11) ROD HANDLE[70]() Specification : ROD HANDLE TO DRG. NO. 30P 2021 WITH FIRM'S MATERIAL IN FULLY FINISHED REQUIRED FOR 40MM MGL C Nonestab
12) ROD HANDLE AS PER DRAWING 33P 2021 IN FULLY FINISHED WITH FIRMS MATERIAL[70]() Specification : ROD HANDLE AS PER DRAWING 33P 2021 IN FULLY FINISHED WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Muradnagar

Name Specification Use Status
1) FILLING PLUG FORGING 1000 LBS L F NO 2015995448[20]() Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. [DRG.ENCLOSED]. C Nonestab
2) FORGING FOR LUG 318 FOR 1000 LBS L F NO 6220601406[62]() Specification : FORGING FOR LUG SUSPENSION NO.318 AS PER DRG.OFM-31738B TO BE SUPPLIED DULY HEAT-TREATED (HARDENED & TEMPERED) TO ACHIEVE HARDNESS OF 180-250 VPN,Y.S. 44KG/SQR MM MIN.,UTS -60-75 KG/SQR MM,ELONGATION-18% MIN.0N 5.65 UNDER ROOT "A".(DRGS. C Nonestab
3) FORGING FOR LUG 243 AS PER DRG FOR 1000 LBS L F NO 6220700172[62]() Specification : FORGING FOR LUG 243,DRG. No,OFM-32616ATO BE SUPPLIED DULY HEATTREATE D(HARDENED & TEMPERED)TO ACHIEVE HARDNESS OF 210-261 VPN.YS=46 KG/MM.SQ.MIN,UTS=70-85KG/MM.SQ,EL=5. 65 ROOT A-16% MIN.OR ON YFOUR ROOT A-20% MIN. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Muradnagar

Name Specification Use Status
1) LUG HOUSING HOLDER 250 KG L F NO 6240100124[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
2) PLUG A C34 DRG ARM 1172 A 16 FOR 1000 LBS L F NO 6220501010[62]() Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED) C Nonestab
3) PLUG FASTENING FOR 250 KG L F NO 6241101124[62]() Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
4) PLUG SURFACE TREATED FOR 250 KG L F NO 6240901205[62]() Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED][DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
5) PLUG FOR LUG HOUSING 250 KG L F NO 6241101114[62]() Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
6) THRUSTER PLATE FOR 1000 LBS L F NO 6220200120[62]() Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615. (DRG. ENCLOSED). C Nonestab
Category : ddp
Grade : 3
Size : S
1Ordnance Factory Muradnagar

Name Specification Use Status
1) T A BOLT M20 X 1 POINT 5 6G EXCLUDING HARDENING TRACK T 90 ITEM CODE 6120100257[61]() Specification : ["TA BOLT (M20 X 1.5-6G)IN FORGED AND MACHINED CONDITION AS PER DRG.NO.172.55.026 AND TECHNICAL SPECIFICATION NO.OFM/TDS [/TECH/05,EXCLUDING HARDENING AND CADMIUM PLATING".BOLTS SHOULD BE FREE FROM ANY FORGING SCALES. C Nonestab
Category : ddp
Grade : 3
Size : S
1Small Arms Factory

Name Specification Use Status
1) Steel Forging Piston Extension for JVPC[01]() Specification : Steel Forging Piston Extension for JVPC 5.56 mm as per drawing SK-5725 R Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) STEEL FORGING BLOCK REAR FOR LMG 5 56[03]() Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17 C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) FORGING RECEIVER GUIDE FRONT RIGHT for MAG[41]() Specification : FORGING RECEIVER GUIDE FRONT RIGHT TO DRG NO. SKM-305*2 C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) Steel Forging Cylinder Gas[01]() Specification : Steel Forging Cylinder Gas SKM 306*6 MACRO ETCH & NMIR TEST AS PER STORE DRAWING for MAG R Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) Steel Forging Piston Extension for JVPC[01]() Specification : Steel Forging Piston Extension for JVPC 5.56MM as per Drawing No. SK 5725 C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) STEEL FORGINGS FOR BRACKET BACK SIGHT[01]() Specification : STEEL FORGING TO DRG.NO.SKM-309*1(BRACKET BACK SIGHT ), R Nonestab
2) STEEL FORGING FOR LEVER LOCKING FOR MAG[04]() Specification : DRG. NO. SKM-303*5 MICRO-ETCH & NMIR TEST AS PER DRG. C Nonestab
3) St Forging Plate Bottom for MAG[01]() Specification : DRG No. SKM-283*2 R Nonestab
4) St Forging Cylinder Gas Drg No SKM 306 star 5[01]() Specification : St Forging Cylinder Gas Drg No SKM 306 star 5 C Nonestab
5) ST FORGING BUFFER BODY FOR MAG[01]() Specification : DRG. NO. SKM-304*1 C Nonestab
6) STEEL FORGING BREECH BLOCK SLIDE FOR MAG[04]() Specification : DRG.NO.SKM-281*2 'NI' SPOT TEST WILL BE CARRIED OUT ON 100% FORGINGS. MACRO ETCH AS PER ASTME-381 WITH ACCEPTANCE STANDARD AS C2, R2,S2 & NMIR TEST AS PER IS-4163-82. C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) STEEL FORGING HAMMER FOR JVPC[01]() Specification : STEEL FORGING HAMMER FOR JVPC 5.56 MM AS PER DRG. NO. SK JVPC 969. C Nonestab
2) Steel Forging Piston Extension for JVPC[01]() Specification : Steel Forging Piston Extension for JVPC 5.56MM as per Drawing No. SK 5725 C Nonestab
3) Steel Forging Block Gas for JVPC[01]() Specification : STEEL FORGING BLOCK GAS FOR JVPC 5.56MM AS PER DRG.NO. SK-JVPC-6003 C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) STEEL FORGING BLOCK REAR FOR LMG 5 56[03]() Specification : STEEL FORGING BLOCK REAR TO DRG.NO.MS-331*1 D.A.NO. 09/17 C Nonestab
2) STEEL FORGING TO FOR BLOCK FRONT OF MAG[01]() Specification : STEEL FORGING TO DRG NO. SKM-282*4. FOR BLOCK FRONT OF MAG 7.62MM R Nonestab
3) Steel Forging Cylinder Gas[01]() Specification : Steel Forging Cylinder Gas SKM 306*6 MACRO ETCH & NMIR TEST AS PER STORE DRAWING for MAG R Nonestab
4) Steel Forged Trigger for LMG[04]() Specification : STEEL FORGED TRIGGER TO DRG NO.SK-5294*D.A. 11/2020. C Nonestab
5) STEEL FORGED TRIGGER for LMG[04]() Specification : STEEL FORGED TRIGGER TO DRG NO.SK-5294* D.A. 11/2020. C Nonestab
Category :
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) PLANET PINION Z 15 to 3901040045[39]() Specification : GOST 4543-71 C Nonestab
2) PLANET PINION Z 18 to 3901040046[39]() Specification : GOST 4543-71 C Nonestab
Category :
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) SUN GEAR II PLANETARY GEAR SET LF 3901040039[39]() Specification : GOST 4543 71 C Nonestab
2) THRUST DISC TO DRG NO 172 40 325 F TO LF 3901040058[39]() Specification : GOST 4543-71 C Nonestab
3) AUXILLARY GEAR TO 3906113242[39]() Specification : GOST 4543-71 C Nonestab
4) Carrier Cheek to LF No 3901040051[39]() Specification : GOST 4543-71 C Nonestab
5) CARRIER CHEEK TO LF 3901040050[39]() Specification : GOST 4543-71 R Nonestab
6) GEAR SUN TO LF 3906401040[39]() Specification : GOST 4543-71 C Nonestab
7) SHAFT TO LF 3906211069[39]() Specification : GOST 4543-71 C Nonestab
Category :
Grade : Grade III
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) COVER SUCTION PUMP TO LF 3906407099[39]() Specification : GOST 4543-71 C Nonestab
2) COVER SUCTION PUMP TO LF 3906407056[39]() Specification : GOST 4543-71 C Nonestab
3) DISC LOCKING TO LF 3906211039[39]() Specification : GOST 4543-71 R Nonestab
4) LEVER TO LF 3906861041 TO DRG NO 172 52 124 F[39]() Specification : GOST 4543-71 C Nonestab
5) Bushing to LF 3906402023 to Drg 172 2M 52 005 F[39]() Specification : GOST 4543-71 C Nonestab
6) Lever to Drg 172 52 124 F to LF 3906861041[39]() Specification : GOST 4543-71 C Nonestab
Category :
Grade : Grade III
Size : S
267 Merino Elastomers India Pvt. Limited
XIX-115(14), IInd Floor, Royal Plaza, Bridge Road, Aluva - 683101 Bridge Road Aluva Kerala
PIN1 : 683101
Phone No. : 2656134
GSTIN : 32AAFCM9083R1ZQ 		AAFCM9083R

Download 		1Rifle Factory Ishapur

Name Specification Use Status
1) BUTT PLATE FOR 12 BORE MODIFIED PUMP ACTION GUNTO RFI DRG.NO. PAG-0067[MATL.-VULCANISED CHLOROPRENE RUBBER COMPOUND(NEOPRENE-1)SPECN.NO.IND/ME/484/PROV(BASED ON BS:2752-56),CLASS C4[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size : S
268 Shree Ram Constructions
DIXIT SADAN, NEW DEFENCE COLONY, NEAR HOLY ANGEL SCHOOL CHINOUR ,SHAHJAHANPUR 242001( UTTAR PRADESH) DEFENCE COLONY CHINOUR SHAHJAHANPUR Uttar Pradesh
PIN1 : 242001
Phone No. : 280507 		AAWFS9221P

Download 		1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) Stitch No. 406 on Border of Blanket Superior OG() Border (Poly Satin Piping 7 cm wide O.G) Stitching No.-406 on Blanket Superior OG. R Not Estab.
Category : DP
Grade : II
Size : S
269 Shree Ram Udyog
161, Rabindra Sarani, 3rd Floor, Room No. 301 Kolkata West Bengal
PIN1 : 700007
Phone No. : 033-22268199, 222708758, 9830264853
GSTIN : 19ADCPA9702G1ZT 		ADCPA9702G

Download 		1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) HDPE Bag White size 75 cm X 50 cm X 100 cm() IS:11652-2000 HDPE Bag white size 75 cm X 50 cm X 100 cm R Not Estab.
Category : DP
Grade : III
Size : S
1Ordnance Equipment Factory

Name Specification Use Status
1) CLOTH "C" HEAVY 72 CM (CAT PART NO. H2/8305-000142)() AS PER REQUIREMENT & SPECIFICATION R
2) Cloth Hessian Light Variety() Cloth Hessian Light Variety 102 cms., IS:2818 (Pt.-2) Latest R
3) TWINE JUTE 3 PLY (CAT/PART NO. H2/4020000195)() IS:1912 -1984 V.NO.2 R
4) HESSIAN LAMINATED CLOTH 97 CMS. WIDE() IND/TC/2133(P) R
5) HESSIAN CLOTH 305 GRAM/M-2 WITH POLYTHENE LAMINATION 72 CMS. () IS:2818 PT II - 1971 R
6) HESSIAN LAMINATED CLOTH 72 CMS. WIDE() IND/TC/2133 (b) R
7) HESSIAN LAMINATED CLOTH MEDIUM 102 CMS. () IND/TC/2123 (b) R Established
Category : P
Grade : III
Size : S
270 VIJAYSHREE AUTOCOM LTD.
Premises No.9, 5th Phase, Industrial Area, Gamharia, Seraikela-Kharsawan, Jharkhand
PIN1 : 832108
Phone No. : 0657-6450224
GSTIN : 20AADCV1952C1ZX 		CALV03366G

Download 		1Vehicle Factory Jabalpur

Name Specification Use Status
1) Assy. Fuel Tank-215447500102(V2)() As per specification/Drg. C Not established
2) S/A of Fuel Tank LH - B 5028202() As per specification / Drawings C Non Established
3) S/A of Fuel Tank RH - B 5028201() As per specification / Drawings C Non Established
Category : P
Grade : II
Size : M
271 ACCURATE FORGING
G-27 Rajouri Garden New Delhi-110027 RAJOURI GARDEN NEW DELHI Delhi
PIN1 : 110027
Phone No. : 7982691702
GSTIN : 07AAKPJ9361M1Z3 		AAKPJ9361M

Download 		1Ammunition Factory Khadki

Name Specification Use Status
1) CAP CHAMBER MODIFIED FOR DET 36M 4 SEC DELAY[64]() Specification : CAP CHAMBER (MODIFIED) FOR DET. 36M, 4 SEC DELAY AS PER DRG. NO. AFK/SK 874-18 DT 28-07-2018 R Nonestab
Category : p
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) CAP WITH HOLDER FFV-840 DRG. NO. F-1334-230761-C[60]() Specification : DRG NO F-1334-230761 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) SHELL BODY BLANK TO OFK DRG 839L LF 6170444600[61]() Specification : SHELL BODY BLANK (INTERNAL OPERATION) TO O.F.KHAMARIA DRG NO.TRD-839 (L). C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) CARTG.CASE DRG ARDE/2165/2 ERU 204[60]() Specification : SPECN.ARDE/SPECN/423 C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) RUBBER SLUGS 18MM D X 35MM H[60]() Specification : DRG NO AFK/SK-2675 SHEET NO.1 C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) RUBBER SLUGS 18MM D X 35MM H[6099990172]() Specification : DRG NO AFK/SK-2675 SHEET NO.1 C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) FLY OFF LEVER FOR STRIKER MECHANISM IN FINISHED CONDITION[70]() Specification : FLY-OFF LEVER TO DRG.NO. NAD 7606/4 DT. 03 SEP 13 FOR STRIKER MECHANISM IN FINISHED CONDITION C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) Striker to Drg no NAD 7606 by 2 for Striker Mechanism in finished condition[70]() Specification : Striker to Drg. no. NAD 7606/2 DT. 03 Sep 13 for Striker Mechanism in finished condition. ARD no.2572, DT.26.07.2019. C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) SMOKE COMP.CASING DRG.NO.KF/PJ/SK12[6078020212]() Specification : CQA[A] SEALED DRG NO 04-749- 130222-05.1E C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) SMOKE COMP.CASING DRG.NO.KF/PJ/SK12[60]() Specification : CQA[A] SEALED DRG NO 04-749- 130222-05.1E C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) STEEL INSERT ARDE DRG NO 17 04 02 02 00 01 001 00DA[60]() Specification : STEEL INSERT (ARDE DRG) DRG NO 17 04 02 02 00 01 001 00DA 06/04/2017 C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) CASE FOR CARTRIDGE 38 MM RUBBER BULLET[60]() Specification : DGOF 135 (A)DT. 15-11-99. C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG. NO. KF/SK-1746 SHEET NO.2 SPECN. DGOF 135[60]() Specification : DGOF 135 (A)DT. 15-11-99. C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) STEEL INSERT FOR 5.56X30MM BALL BUL[60]() Specification : BS 970 PT.I, 1983 080 M40/709M40 OR ALTERNATE TO SPECN. BS-970 EN 8M C Nonestab
2) STEEL INSERT FOR NATO BULLET[60]() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) STEEL INSERT FOR 5.56X30MM BALL BUL[60]() Specification : BS 970 PT.I, 1983 080 M40/709M40 OR ALTERNATE TO SPECN. BS-970 EN 8M C Nonestab
2) STEEL INSERT FOR NATO BULLET[60]() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) STEEL INSERT FOR 5.56X30MM BALL BUL[60]() Specification : BS 970 PT.I, 1983 080 M40/709M40 OR ALTERNATE TO SPECN. BS-970 EN 8M C Nonestab
2) STEEL INSERT FOR NATO BULLET[60]() Specification : DRG. NO. AFK/SK-729-12, SHEET NO. 2 OF 3 DT. 13.09.2012 C Nonestab
3) STEEL INSERT TO DRG NO. ARDE/SA/395 FOR BULLET 5.56 X 30MM CARTG.[60]() Specification : DRG NO. ARDE/SA/395 R Nonestab
4) STEEL INSERT AS PER DRG NO.0803-00-02-01-01-00100DA.[60]() Specification : DRG NO.0803-00-02-01-01-00100DA. C Nonestab
5) STEEL INSERT AS PER DRG NO.(ARDE DRG) 0805 01 00 01 01 001 OODA.[60]() Specification : DRG NO.(ARDE DRG) 0805 01 00 01 01 001 OODA. C Nonestab
6) STEEL INSERT (JVPC MK-II) DRG NO. 0204 0205 00 01 001 00 DC.[60]() Specification : DRG NO. 0204 0205 00 01 001 00 DC. C Nonestab
7) STEEL INSERT TO DRG. NO. ARDE-SK-2795 DET NO.9, PART NO IQV 112 C 37206-A.[60]() Specification : DRG. NO. ARDE-SK-2795 DET NO.9, PART NO IQV 112 C 37206-A. C Nonestab
8) STEEL INSERT (MODIFIED) FOR BULLET, DRG.NO. AFK/SK-2556 SHEET NO.1 DT.8-8-2001.[60]() Specification : DRG.NO. AFK/SK-2556 SHEET NO.1 DT.8-8-2001. C Nonestab
9) STEEL INSERT FOR BULLET FOR CARTG. 5.56MM X 30MM (MSMC) AS PER ARDE DRG.NO.0204-02-01-01-01-00-00DB[60]() Specification : ARDE DRG.NO.0204-02-01-01-01-00-00DB C Nonestab
10) STEEL INSERT. FOR 6.8MM BULLET AS PER DRG. NO. 085 01 00 01 01 001 00D (ARDE DRG.)[60]() Specification : DRG. NO. 085 01 00 01 01 001 00D (ARDE DRG.) C Nonestab
11) STEEL INSERT (MRN) FOR BULLET FOR CARTG. 5.56MM X 30MM, (R-31) MSMC (MRN) AS PER DRG. NO. - 0204-02-00-00-003-00XA[60]() Specification : DRG. NO. - 0204-02-00-00-003-00XA C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG. NO. KF/SK-1746 SHEET NO.2 SPECN. DGOF 135[60]() Specification : DGOF 135 (A)DT. 15-11-99. C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Dehu Road

Name Specification Use Status
1) SHELL 001 FOR 81MM SMOKE 3D6[62]() Specification : DRAWING NO.4-26941 DET 001 C Nonestab
Category :
Grade : Grade III
Size : S
272 PRASHANT ENGINEERING WORKS
KHASRA NO.1087, SADDIQUE NAGAR (VIKAS NAGAR) STREET NO.1 GHAZIABAD Uttar Pradesh
PIN1 : 201001
Phone No. : 28302020
GSTIN : 09AQYPS9030J1ZV 		AQYPS9030J

Download 		1Gun and Shell Factory

Name Specification Use Status
1) DUMMY PELLET IN F/C TO DRG.NO.M-10395() AS PER DRG. & SPECIFICATION C NOT ESTAB.
Category : DDP,DP
Grade : I,II
Size : S
1Ordnance Factory Muradnagar

Name Specification Use Status
1) LUG HOUSING OF 250KG() AS PER OFM SPECIFICATION C NOT ESTABLISHED
Category : DDP,DP
Grade : I,II
Size : S
1Ordnance Factory Dehradun

Name Specification Use Status
1) HOUSING OG AS PER DRG. NO.MCT-3293 (NOTE :- ITEM SHOULD BE WITHOUT ANODISING & POWDER COATING)() As per required Specification C Not Estab.
2) SCREW DRG. NO. MCT-2949/1 FOR HR BINO.() As per required Specification C Not Estab.
3) RING RETAINING DRG. NO. MCT-2959/1.() As per required Specification C Not Estab.
4) SOCKET AS PER DRG. NO. MCT-3189.() As per required Specification C Not Estab.
5) RING RETAINING EP DRG.NO. CWC/229/33.() As per required Specification C Not Estab.
6) COVER PLATE–H DRG. NO. CWC/229/64/2.() As per required Specification C Not Estab.
7) CELL EP DRG. NO. CWC/229/35/1.() As per required Specification C Not Estab.
8) SECURING RING DRG. NO. CWC/229/56/1 FOR II TUBE.() As per required Specification C Not Estab.
9) GRATICULE RING DRG. NO.CWC/229/67/2.() As per required Specification C Not Estab.
10) CELL GRATICULE DRG. NO.CWC/229/28/1.() As per required Specification C Not Estab.
11) CAP, PROTECTIVE, DUST AND MOISTURE SEAL AS PER DRG. NO. IRDE-1035/59.() As per required Specification C Not Estab.
Category : DDP,DP
Grade : I,II
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) SEMI MACHINE UNION RING TO DRG NO.ISX-492 DC NO.37341-A DT.6/9/2013[62]() Specification : AS PER DRG.& SPECIFICATION C Nonestab
Category : p
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) DETENT TO DRG. NO. QX-1507 FOR Fz MK-8 & 9[63]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Dehradun

Name Specification Use Status
1) ADAPTER BLANK MCT 2878 FOR INDICATER FUZE 105 37 FD[74]() Specification : ADAPTER,BLANK MCT-2878.FOR INDICATER,FUZE,105/37 FD C Nonestab
2) CELL AS PER DRG NO MCT 3279[74]() Specification : CELL AS PER DRG.NO.MCT-3279 C Nonestab
3) RING RETAINING TO DRG NO MCT 2946 2 FOR HR BINO 8X30 R[74]() Specification : RING RETAINING TO DRG.NO. MCT-2946/2 FOR HR BINO 8X30 R C Nonestab
4) SCREW DRG NO MCT 2949 2 FOR HR BINO[74]() Specification : SCREW DRG.NO. MCT-2949/2 FOR HR BINO C Nonestab
5) SUPPORT DIAL SCALE TO DRG NO MCT 3243 FOR SIGHT DIAL 104A[74]() Specification : SUPPORT DIAL SCALE TO DRG.NO.MCT-3243 FOR SIGHT DIAL 104A C Nonestab
6) STUD DRG.NO.CQA(I)-46/2[74]() Specification : AS PER SPECIFICATION C Nonestab
7) BEARING SLEEVE DRG NO IRDE 1175 108[74]() Specification : BEARING SLEEVE DRG NO.IRDE-1175/108 C Nonestab
8) NUT PLAIN ROUND AS PER DRG NO MCT 3012[74]() Specification : NUT,PLAIN ROUND AS PER DRG.NO. MCT-3012. C Nonestab
9) BUSH AS PER DRG NO CWC 229 77 1[74]() Specification : BUSH AS PER DRG.NO.CWC/229/77/1. C Nonestab
10) BOLT MILD STEEL HEXAGONAL HEAD FULL THREADED SIZE M5 25 LONG TO IS 1363[17]() Specification : BOLT MILD STEEL HEXAGONAL HEAD FULL THREADED SIZE M5X25 LONG. TO IS-1363 C Nonestab
11) BRASS WOOD SCREW SLOTTED CSK HEAD SIZE NO 2 X 10 MM LONG TO IS 6760[17]() Specification : BRASS WOOD SCREW SLOTTED CSK HEAD SIZE NO. 2 X 10 MM LONG TO IS-6760 C Nonestab
12) CAP PROTECTIVE DUST AND MOISTURE SEAL[74]() Specification : CAP ,PROTECTIVE,DUST & MOISTURE SEAL DRG.NO.MCT-1124/1 C Nonestab
13) HOLDER DRG IRDE 1175 45 SHT 2 FOR SIGHT DIAL 104A[74]() Specification : HOLDER DRG.IRDE-1175/45 SHT.2 FOR SIGHT DIAL 104A W.O.42045. C Nonestab
14) CLAMP FINISH TO DRG NO MCT 2103[74]() Specification : CLAMP(FINISH) TO DRG NO. MCT-2103 C Nonestab
15) NUT PLAIN ROUND IRDE 1175 30[74]() Specification : NUT PLAIN ROUND IRDE-1175/30 C Nonestab
16) NUT TO DRG NO MCT 2451[74]() Specification : NUT TO DRG.NO.MCT-2451 C Nonestab
17) NUT CLAMPING AS PER DRG NO MCT 3163[74]() Specification : NUT CLAMPING AS PER DRG.NO.MCT-3163 C Nonestab
18) SLEEVE TO DRG NO MCT 3249 FOR CLINOMETER 2A 46[74]() Specification : SLEEVE TO DRG.NO.MCT-3249 FOR CLINOMETER 2A 46 C Nonestab
19) SCREW DIAL SCALE M3 X 5 MM DIN 88 FOR TELESCOPE SIGHT 84 MM RCL GUN[17]() Specification : SCREW , DIAL SCALE M3 X 5 MM DIN-88 FOR TELESCOPE SIGHT 84 MM RCL GUN. C Nonestab
20) MOUNTING BOLT DRG NO CQA I 792 35 FOR TELESCOPIC SIGHT MK III[74]() Specification : MOUNTING BOLT DRG.NO.CQA(I)-792/35 FOR TELESCOPIC SIGHT MK-III C Nonestab
21) PLUG SCREWED SPECIAL AS PER DRG NO IRDE 180 20[74]() Specification : PLUG SCREWED SPECIAL AS PER DRG. NO IRDE -180/20 C Nonestab
22) SCREW SPECIAL DRG NO MCT 1137 1[74]() Specification : SCREW SPECIAL DRG.NO.MCT-1137/1 C Nonestab
23) SCREW SPECIAL DRG NO 2880[00]() Specification : SCREW SPECIAL DRG.NO.2880 C Nonestab
24) STEEL WASHER PLAIN M4 CONFIRMING TO IS 2016[17]() Specification : STEEL WASHER PLAIN M-4 CONFIRMING TO IS-2016 C Nonestab
25) SCREW GRUB C BRASS M2X3 LG IS 2388 FOR BINO 20X70[17]() Specification : SCREW GRUB'C' BRASS M2X3 LG IS-2388 FOR BINO 20X70 C Nonestab
26) WASHER FLAT AS PER DRG NO IRDE 1159 9[74]() Specification : WASHER, FLAT AS PER DRG.NO.:IRDE-1159/9 C Nonestab
27) COLLER TO DRG OS 12327[74]() Specification : COLLER TO DRG.NO.OS-12327,MCT-2831 FOR DFC NO-7 ,WO.19225. C Nonestab
28) CELL OPTICAL ELEMENT AS PER DRG NO MCT 3269 1 FOR SIGHT DIAL 104A[74]() Specification : CELL OPTICAL ELEMENT AS PER DRG.NO. MCT-3269/1 FOR SIGHT DIAL 104A C Nonestab
29) CELL DRG NO MCT 1161 3 FOR SIGHT UNIT CASED 102 B[74]() Specification : CELL DRG. NO. MCT-1161/3 FOR SIGHT UNIT CASED 102B C Nonestab
30) ROUND HEAD WOOD SCREW NO 4X12 STEEL PHOSPHATE IS 6739[17]() Specification : ROUND HEAD WOOD SCREW NO. 4X12 STEEL PHOSPHATE. IS-6739 C Nonestab
31) SCREW GRUB C M BRASS IS 2388[17]() Specification : SCREW GRUB 'C' M1.6X4 LONG BRASS IS-2388 C Nonestab
32) CSK SCREW STEEL M3X5 MM[17]() Specification : CSK SCREW STEEL M3X5 MM C Nonestab
33) SCREW BA BRASS RD HEAD NO 8 X 2MM LONG[17]() Specification : SCREW BA BRASS RD HEAD NO. 8 X 2MM LONG C Nonestab
34) SOCKET HEAD CAP SCREW M 4X10 STEEL CONFIRMING TO IS 2269 P 8 8 MAKE UNBRAKO TVS LPS[17]() Specification : SOCKET HEAD CAP SCREW M 4X10 STEEL CONFIRMING TO IS-2269 P 8.8 MAKE-UNBRAKO/TVS/LPS. C Nonestab
Category : p
Grade : Grade III
Size :
273 Blog Garments
No. 54, GODOWN STREET Chennai TAMILNADU
PIN1 : 600001
Phone No. : 044-25382409/044-32018900
GSTIN : 33AAIPM5574D1ZR 		CHEM05285A

Download 		1Ordnance Clothing Factory Avadi

Name Specification Use Status
1) Fabrication of Shirt PW DD Khaki H/S () As per the Specification E Non Established
2) Fabrication of Shirt PW DD Khaki F/S() As per the Specification E Non Established
3) Fabrication of Trousers PW DD Khaki() As per the Specification E Non Established
4) Fabrication of Shirt Disposable() As per the Specification E Non Established
5) Fabrication of Shorts Disposable() As per the Specification E Non Established
6) Fabrication of Trousers sleeping() As per the Specification E Non Established
7) Fabrication of Jacket sleeping() As per the Specification E Non Established
8) Fabrication of Overall Mazri() As per the Specification E Non Established
9) Fabrication of Trouser Serge Polywool 1973 Pattern (modified)() As per the Specification E Non Established
10) Fabrication of Shorts Cotton Light OG() As per the Specification E Non Established
11) Fabrication of Shirt Plain Weave PV light Blue F/S() As per the Specification E Non Established
12) Fabrication of Shorts PV DD Khaki() As per the Specification E Non Established
13) Fabrication of Trousers PW PV DD OG() As per the Specification E Non Established
14) Fabrication of Trousers PW PC Khaki() As per the Specification E Non Established
15) Fabrication of Shirt PV Light Grey H/S() As per the Specification E Non Established
16) Fabrication of Cap DB White() As per the Specification E Non Established
17) Fabrication of Coat DB White() As per the Specification E Non Established
18) Fabrication of Trousers DB White() As per the Specification E Non Established
19) Fabrication of Trouser PV Blue Grey() As per the Specification E Non Established
20) Fabrication of Coat Combat Disruptive Detachable Lining() As per the Specification E Non Established
21) Fabrication of Overall Combination Black() As per the Specification E Non Established
22) Fabrication of Coat ECC() As per the Specification E Non Established
23) Fabrication of Overall Comb. Disruptive () As per the Specification E Non Established
24) Fabrication of Shirt PV Light blue H/S() As per the Specification E Non Established
25) Fabrication of Jacket Combat PC Disruptive Pattern with Indian Army Logo () As per the Specification E Non Established
26) Fabrication of Trousers Combat PC Disruptive Pattern with Indian Army Logo () As per the Specification E Non Established
27) Fabrication of Jacket Combat PC Disruptive Pattern with Indian Army Logo (modified)() As per the Specification E Non Established
28) Fabrication of Trousers Combat PC Disruptive Pattern with Indian Army Logo (modified)() As per the Specification E Non Established
29) Fabrication of Shirt Mans Angola Drab Poly Wool Modified Pattern 2012() As per Specification & Requirement E Established
30) Fabrication of Shorts PW PC White (modified)() As per Specification & Requirement E Non Established
31) Fabrication of Overall Drill MP() As per Specification & Requirement E Non Established
32) Fabrication of Overall Combination Greenish Khaki() As per Specification & Requirement E Non Established
33) Fabrication of Shorts Gymnastic Blue() As per Specification & Requirement E Non Established
Category : P
Grade : III
Size : S
274 METAL GEMS
PLOT NO. 113 TO 120, PANCHAL UDYOG NAGAR BHIMPORE DAMAN DAMAN (UT)
PIN1 : 396210
Phone No. : 02602221620
GSTIN : 26AADFM0423E1ZW 		MUMM18760A

Download 		1Ordnance Cable Factory Chandigarh

Name Specification Use Status
1) COPPER WIRE ROD() AS PER RELEVENT SUPPLY ORDER R Estab.
2) COPPER PIPE() AS PER RELEVENT SUPPLY ORDER R Estab.
3) COPPER BUS BAR/ FLATS() AS PER RELEVENT SUPPLY ORDER R Estab.
Category : P
Grade : II
Size : S
275 Sainath Udyog
F22,MIDC,Ahmednagar MIDC,Ahmednagar Ahmednagar Maharashtra
PIN1 : 414111
Phone No. : 7020540032
GSTIN : 27AAECI8220K1ZF 		NSK101623G

Download 		1Ammunition Factory Khadki

Name Specification Use Status
1) CLIPS SEALS 13MM 0.15MM W0.5MM 0.03[01]() Specification : IS:1029-1970 FIRST REVISION WITH AMENDMENT NO. 1 & 2 C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) BRASS STRIP 0.42MM TH X39.5MM WIDE[07]() Specification : JSS-9535-02-2008 Rev.3 R Nonestab
2) BRASS STRIP 0.15THX19.5MM WIDE[07]() Specification : IS:410-1977 REAFFIRMED 2006 AMDS 1 R Nonestab
3) BRASS STRIP 2.03MMTHX0.025MM THICK[07]() Specification : JSS-9535-02-2008 REV. 3 R Nonestab
4) BRASS STRIP 1.00MM THK X 12MM WIDE[07]() Specification : JSS-9535-02- 2008 REV. 3 R Nonestab
5) BRASS STRIP 113MM WIDE X 0.40MM THICK[07]() Specification : JSS 9535-02:2008 REV. 3. R Nonestab
6) BRASS STRIP 0.47MM TH. X 35.6MM WIDE[07]() Specification : JSS-9535-02-2008 REV. 3 R Nonestab
7) BRASS STRIP 32.0MM WIDE X 0.70 MM THIK[0717561186]() Specification : JSS 9535-02:2008 REV NO. 3 R Nonestab
8) BRASS STRIP 35.60MM WD X 0.81MM THK[0717561254]() Specification : JSS 9535-02:2008 Rev 3 R Nonestab
9) BRASS STRIP 36MM WIDE X 0.76MM THIK[07]() Specification : JSS-9535 2(FEB 82) WITH AMENDMENT NO 1. R Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) CYLINDER NO 274 MK1 SER[65]() Specification : IA 1163 C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) ELECTROLYTIC TIN PLATE 710X765X.25MM THICK[01]() Specification : IS:1993-2006 (FOURTH REVISION) R Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) BRASS TUBES SEAMLESS OD 6MM ID 5MM[70]() Specification : JSS: - 9535-02:2008, PHYSICAL PROPERTIES TO SPECN. IS 407-1981 R Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) BODY FOR BOMB 51 MM MORTAR HE 2A[60]() Specification : CQA(A)- 2322 C Nonestab
2) BOMB 81MM HE MORTAR C EMPTY[60]() Specification : CQA (A) 2305 & L 8638-J C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) ALUMINIUM ROD 9MM DIA SPECN IS-733-1983[06]() Specification : IS -733-1983 DESIGNATION 19500 R Nonestab
2) ALUMINIUM STRIP 0.46+0.04MM-0.05MM X34.3MM[06]() Specification : IS 737-2008 (4TH REVISION) GRADE 19000 R Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) STEEL WASHER TO DRG.ARDE/2165 DET 3[60]() Specification : SPECN. ARDE/SPECN/423 C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) BODY PROJECTILE[60]() Specification : CQA[A] SEALED DRG NO. 04-749-130222- 01.1E C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) WASHER DELAY CIA 1804[6140700341]() Specification : CQA(A)1804 C Nonestab
2) SET SCREW SLOTTED HD NO 2 BA[17]() Specification : DESIGN REF CIA/AMN/885 C Nonestab
3) ADAPTER NOSE MOR BOMB NO.1 MK 1[6041300500]() Specification : CQA(A) 2351 C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) ALUMINIUM FOIL PIECES SIZE 64 MM X 76 MM X 0.05 MM THICKNESSDRG NO. AFK/SK - 815 - 15 DT. 22.06.2015[06]() Specification : DRG NO. AFK/SK - 815 - 15 R Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) COPPER CONDUCT.TND.ANLD.DIA 0.6MM[15]() Specification : DEF.STAN 61-12 (PART 6) ISSUE - 4 R Nonestab
2) COPPER WIRE 1/0.50MM DIA 0.50 GREEN[15]() Specification : JSS-51001. COLOUR GREEN PVC HARD CORE R Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) DET PLUG FOR A C BOMB 52 MK6[64]() Specification : DTD&P (AIR)/5/62/ARM C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) SINGLE CORE SILVER PLATED CU WIRE[15]() Specification : DRG NO. NAI(P) SK-123/2 (PROV) SHEET 2 OF 2 R Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) ELECTROLYTIC TIN PLATE 710X765X.25MM THICK[01]() Specification : IS:1993-2006 (FOURTH REVISION) R Nonestab
2) ELECTROLYTIC TIN PLATE 710X765X0.30MM THICK[01]() Specification : IS:1993-2006 (FOURTH REVISION) R Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) WASHER DELAY DESIGN. REF.NO. IA-1899 SHEET NO 3 PART NO.ITX 60 DC 35801-A. SPECN: CQA(A)1804[61]() Specification : CQA(A)1804 C Nonestab
2) CAP WITH HOLDER FFV-840 DRG. NO. F-1334-230761-C[60]() Specification : DRG NO F-1334-230761 C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) BRASS STRIP 0.42MM TH X39.5MM WIDE[07]() Specification : JSS-9535-02-2008 Rev.3 R Nonestab
2) BRASS STRIP 0.15THX19.5MM WIDE[07]() Specification : IS:410-1977 REAFFIRMED 2006 AMDS 1 R Nonestab
3) BRASS STRIP 2.03MMTHX0.025MM THICK[07]() Specification : JSS-9535-02-2008 REV. 3 R Nonestab
4) BRASS STRIP 1.00MM THK X 12MM WIDE[07]() Specification : JSS-9535-02- 2008 REV. 3 R Nonestab
5) BRASS STRIP 113MM WIDE X 0.40MM THICK[07]() Specification : JSS 9535-02:2008 REV. 3. R Nonestab
6) BRASS STRIP 0.40MM X 38MM WIDE[07]() Specification : JSS-9535-02 - 2008 Rev. No. 3 R Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) COPPER ALLOY STRIP 1.22MM THICKX44.45MM WIDE[07]() Specification : IS-3167-1982(FIRST REVISION) REAFFIRMED 1998 R Nonestab
2) COPPER ALLOY STRIP 0.76MM THK X 68.60MM WIDE[07]() Specification : IS:2768-1982 (FIRST REVISION) R Nonestab
3) COPPER ALLOY STRIP 0.7MM 0.025mmTHx44.4mm 0.25W[07]() Specification : COPPER ALLOY STRIP 0.7MM+-0.025MM THICK X 44.4MM +-0.25M M WIDE,ANNEALED HARDNESS 55 HV TO 75 HV R Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) BRASS TUBES SEAMLESS OD 6MM ID 5MM[07]() Specification : JSS: - 9535-02:2008, PHYSICAL PROPERTIES TO SPECN. IS 407-1981 R Nonestab
2) BRASS TUBE (HALF HARD,GR-I/G.C.Q)[07]() Specification : BRASS TUBE (HALF HARD, GR-I/G.C.Q.) TO SIZE OD - 160MM X ID - 140MM X LENGTH 200MM. C Nonestab
Category :
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) WIRE STEEL MILD ANNEALED .9MM THICK[01]() Specification : IS: 280- 2006 (4TH REV) R Nonestab
Category :
Grade : Grade III
Size : S
276 Raghavendra Apparel Chennai
No.2, P.S.V Kalyana Mandapam, Devarajapuram Pattabiram, Chennai TAMILNADU
PIN1 : 600072
Phone No. : 9940084194
GSTIN : 33ADUPR9570M1ZH 		ADUPR9570M

Download 		1Ordnance Clothing Factory Avadi

Name Specification Use Status
1) Fabrication of various garments() As per the Specification E NOT ESTABLISHED
Category : P
Grade : III
Size : S
1Ordnance Clothing Factory Avadi

Name Specification Use Status
1) FABRICATION OF ECAD PARACHUTE EIGHT POINT FIVE METRE SD MADE WITH BLENDED FABRIC 67 IS TO 33 PC AND 100 PERCENTAGE POLYESTER[21]() Specification : IND/TC/2694 WITH AMENDMENT 1,2 &3 E Nonestab
Category :
Grade : Grade III
Size : S
277 EX-SOLDIERS STORES.
S-160,INDUSTRIAL AREA, JALANDHAR, PUNJAB
PIN1 : 144004
Phone No. : 0181-2293114
GSTIN : 03AAAFE3224G1Z6 		AAAFE3224G

Download 		1Gun and Shell Factory

Name Specification Use Status
1) CLEANING ROD ASSY. TO DRG.NO.IRCL 545 (GF 125251)() AS PER DRG.& SPECIFICATION C NOT ESTAB.
2) CLEANING TOOL ASSEMBLY TO DRG.NO.IRCL 592 (GF 215096F) IN F/C() AS PER DRG.& SPECIFICATION C Non Established
3) OILING BRUSH TO DRG.NO: IRCL 591 (GF 215090 J) IN FINISHED CONDITION() AS PER DRG & SPECIFICATION C Non Established
Category : P
Grade : II
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) HANDLE BOF 6002332[90]() Specification : HANDLE BOF 6002332 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) HAND SPIKE ASSY TO DRG NO M2 BOF 4023835[90]() Specification : HAND SPIKE ASSY TO DRG NO M2/BOF-4023835 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) STRAP SECUREING BORE CLEANING BRUSH ROD TO DRG NO BOF 6003501 8[90]() Specification : STRAP SECUREING BORE CLEANING BRUSH ROD TO DRG NO BOF-6003501-8 C Nonestab
Category :
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) HEAD SPIKE ASSY L70[90]() Specification : HEAD SPIKE ASSY L70 /177 DRG 4023835 C Nonestab
Category :
Grade : Grade III
Size : S
1Rifle Factory Ishapur

Name Specification Use Status
1) BAG TOOL SATCHEL FOR RIFLE 5.56MM INSAS. () AS PER DRAWING Not Estab.
Category : P
Grade : III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) COVER ASSY PT NO 675 51 Cb 126 Cb 1005 560439[90]() Specification : COVER,ASSY PT.NO.675-51-Cb-126 Cb/1005-560439 BRANCH PIPE 675-51-Cb-128,BRANCHPIPE LAYOUT675-51-111-01 BASE 675-51-112 BRANCH PIPE ASSYING 675-51-Cb-167Cb BASE,675-51-301 STRIP 675-51-107 SEAL LAYOUT, 675-51-113 C Nonestab
Category : p
Grade : Grade III
Size : S
1Gun Carriage Factory

Name Specification Use Status
1) ADAPTER STRAIGHT PIPE HOSE COUPLING TO DRG. NO. 4730-006953[90]() Specification : ADAPTER STRAIGHT PIPE HOSE COUPLING TO DRG. NO. 4730-006953 C Nonestab
2) SPINDLE BOF 5049526[90]() Specification : SPINDLE BOF 5049526 C Nonestab
Category : p
Grade : Grade III
Size : S
1Gun Carriage Factory

[ENR Registration]
Name Specification Use Status
1) MAINTENANCE EQUIPMENT TO PT NO 1142178 Description : MAINTENANCE EQUIPMENT TO PT NO 1142178() Specification : MAINTENANCE EQUIPMENT TO PT.NO.1142178. C Estab
Category : p
Grade : 3
Size : S
1Small Arms Factory

[ENR Registration]
Name Specification Use Status
1) SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006 Description : SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006() Specification : SLING 9MM STEN MACHINE CARBINE D.S.CAT.NO. 1005-001003 MK-2/L/A-WEBBING, 55-IN LONG ADJUSTABLE WITH STEEL LOOP AND HOOK, DC(I) 26218-SA DATED 05-06-2006 C Estab
Category : s
Grade : 3
Size : S
1Ordnance Factory Kanpur

Name Specification Use Status
1) EXTRACTOR BOX[65]() Specification : EXTRACTOR BOX TO DRG NO. 161-1664FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009 C Estab
2) CUSHION[65]() Specification : CUSHION TO DRG NO.166-411FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009 C Estab
3) BARREL BRUSH[65]() Specification : BARREL BRUSH TO PART NO.176-4327FOR CES AND SMT/STE COMPONENTS OF SHARANG ORDNANCE.-ORDNANCE FACTORY,KALPI ROAD,KANPUR,PIN 208009 P Estab
Category : p
Grade : Grade III
Size : S
278 SCJ PLASTICS
PLOT NO. 79 & 80, HPSIDC INDUSTRIAL AREA, BADDI SOLAN HIMACHAL PRADESH
PIN1 : 173205
Phone No. : 01795247854
GSTIN : 02AAPFS0498H2ZY 		PTLS13799C

Download 		1Ordnance Cable Factory Chandigarh

Name Specification Use Status
1) PVC MASTER BATCHES OF VARIOUS KINDS() AS PER RELEVENT SUPPLY ORDER R Estab.
Category : P
Grade : III
Size : S
279 STABILIANT PRECISION POSITIONING PRIVATE LIMITED
SR.NO. 47, FLAT NO. 1802, FALCON, SUS ROAD, PASHAN SUS ROAD, PASHAN PUNE Maharashtra
PIN1 : 411021
Phone No. : 9588401848
GSTIN : 27ABCCS0185L1Z3 		ABCCS0185L

Download 		1Opto Electronic Factory

Name Specification Use Status
1) HANDLE LF NO 7454311022[74]() Specification : ODCOLF/R&D/108/19-20/11 C Nonestab
2) REAR PANEL LF NO 7454312014[74]() Specification : REAR PANEL LF NO 7454312014 C Nonestab
3) RIGHT WALL LF NO 7454312015[74]() Specification : RIGHT WALL LF NO 7454312015 C Nonestab
4) LEFT WALL LF NO 7454312016[74]() Specification : LEFT WALL LF NO 7454312016 C Nonestab
5) TOP COVER LF NO 7454312017[74]() Specification : TOP COVER LF NO 7454312017 C Nonestab
6) BOTTOM COVER LF NO 7454312018[74]() Specification : BOTTOM COVER LF NO 7454312018 C Nonestab
7) ADAPTOR FOR COSEL LF NO 7454312019[74]() Specification : ADAPTOR FOR COSEL LF NO 7454312019 C Nonestab
8) CHOKE HOLDER LF NO 7454312020[74]() Specification : CHOKE HOLDER LF NO 7454312020 C Nonestab
9) FRONT PANEL LF NO 7454312021[74]() Specification : FRONT PANEL LF NO 7454312021 C Nonestab
10) INTERNAL WALL LF NO 7454312022[74]() Specification : INTERNAL WALL LF NO 7454312022 C Nonestab
11) FEET LF NO 7454312023[74]() Specification : FEET LF NO 7454312023 C Nonestab
12) HANDLE BLOCK LF NO 7454312024[74]() Specification : HANDLE BLOCK LF NO 7454312024 C Nonestab
13) CASE LF NO 7454312025[74]() Specification : CASE LF NO 7454312025 C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) COUPLING TO DRG NO BSH8340169 LF 7432112011[74]() Specification : COUPLING TO DRG NO BSH8340169 (LF 7432112011) C Nonestab
2) AXLE TO DRG NO 14548318102 LF 7432111049[74]() Specification : AXLE TO DRG NO 14548318102 (LF 7432111049) C Nonestab
3) BUSH TO DRG NO BSH8257058 LF 9927089065[99]() Specification : BUSH TO DRG NO BSH8257058 (LF 9927089065) C Nonestab
4) COVER TO DRG NO 15731100001 LF 9927089054[99]() Specification : COVER TO DRG NO 15731100001 ( LF 9927089054) C Nonestab
5) BUSH TO DRG NO NBL8220035 LF 9001090167[90]() Specification : BUSH TO DRG NO NBL8220035 (LF 9001090167) C Nonestab
6) CARDON SHAFT TO DRG NO NBL8244002 LF 9001081419[90]() Specification : CARDON SHAFT TO DRG NO NBL8244002 (LF 9001081419) C Nonestab
7) CLAMPING PLATE TO DRG NO BSH8600548 LF 9927089066[99]() Specification : CLAMPING PLATE TO DRG NO BSH8600548 (LF 9927089066) C Nonestab
8) BUSH TO DRG NO NBL8229006 LF 9001080868[90]() Specification : BUSH TO DRG NO NBL8229006 (LF 9001080868) C Nonestab
9) RING TO DRG NO 14548249125 LF 9021111013[90]() Specification : RING TO DRG NO 14548249125 (LF 9021111013) C Nonestab
10) BUSH TO DRG NO 14548227379 LF 7432111036[74]() Specification : BUSH TO DRG NO 14548227379 (LF 7432111036) C Nonestab
11) RING TO DRG NO AL9135051 LF 7440202704[74]() Specification : RING TO DRG NO AL9135051 (LF 7440202704) C Nonestab
12) AXLE TO DRG NO BSH8314099 LF 7432111030[74]() Specification : AXLE TO DRG NO BSH8314099 (LF 7432111030) C Nonestab
13) RING TO DRG NO BL9144873 LF 9001080083[90]() Specification : RING TO DRG NO BL9144873 (LF 9001080083) C Nonestab
14) STAND LF NO 14548120256 LF NO 7432111066[74]() Specification : STAND LF NO 14548120256 LF NO 7432111066 C Nonestab
15) HEAT SINK LF NO 7420112006[74]() Specification : HEAT SINK LF NO 7420112006 C Nonestab
16) RING LF NO 7440200992[74]() Specification : RING LF NO 7440200992 C Nonestab
17) RING LF NO 7440200993[74]() Specification : RING LF NO 7440200993 C Nonestab
18) NUT LF NO 9001080401[90]() Specification : NUT LF NO 9001080401 C Nonestab
19) PLUG LF NO 9001080681[90]() Specification : PLUG LF NO 9001080681 C Nonestab
20) FLANGE LF NO 9001090475[90]() Specification : FLANGE LF NO 9001090475 C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) GUIDE PIN TO DRG NO 15731110004 LF 9927090389[99]() Specification : GUIDE PIN TO DRG NO 15731110004 (LF 9927090389) C Nonestab
2) NUT TO DRG NO 14548934136 LF 9927089078[99]() Specification : NUT TO DRG NO 14548934136 (LF 9927089078) C Nonestab
3) SUPPORT TO DRG NO 15731000007 LF 9927090953[99]() Specification : SUPPORT TO DRG NO 15731000007 (LF 9927090953) C Nonestab
4) AXLE TO DRG NO BL8305033 LF 9001080302[90]() Specification : AXLE TO DRG NO. BL8305033 (LF 9001080302) C Nonestab
5) AXLE DRG NO BSH8314081 LF NO 9004091226[90]() Specification : AXLE DRG NO BSH8314081 LF NO 9004091226 C Nonestab
6) DAY OG PLATE LF NO 7420211069[74]() Specification : DAY OG PLATE LF NO 7420211069 C Nonestab
7) KEY PAD FRAME LF NO 7420211070[74]() Specification : V C Nonestab
8) FRAME CUPOLA WINDOW LF NO 7420211071[74]() Specification : FRAME CUPOLA WINDOW LF NO 7420211071 C Nonestab
9) CASING FOR CUPOLA WINDOW LF NO 7420211072[74]() Specification : CASING FOR CUPOLA WINDOW LF NO 7420211072 C Nonestab
10) COVER FOR CUPOLA WINDOW LF NO 7420211073[74]() Specification : COVER FOR CUPOLA WINDOW LF NO 7420211073 C Nonestab
11) LOCATOR DRG NO BL8362427 LF NO 7432111032[74]() Specification : LOCATOR DRG NO BL8362427 LF NO 7432111032 C Nonestab
12) BUSH DRG NO 14548227378 LF NO 7432111035[74]() Specification : BUSH DRG NO 14548227378 LF NO 7432111035 C Nonestab
13) COVER DRG NO M2615403 LF NO 7432111048[74]() Specification : COVER DRG NO M2615403 LF NO 7432111048 C Nonestab
14) BODY DRG NO M2612101 LF NO 7432111051[74]() Specification : BODY DRG NO M2612101 LF NO 7432111051 C Nonestab
15) BEARING DRG NO BSH8250105 LF NO 7432111062[74]() Specification : BEARING DRG NO BSH8250105 LF NO 7432111062 C Nonestab
16) BODY DRG NO Y747045 LF NO 7432312003[74]() Specification : BODY DRG NO Y747045 LF NO 7432312003 C Nonestab
17) RING DRG NO AF8241731 LF NO 7432411038[74]() Specification : RING DRG NO AF8241731 LF NO 7432411038 C Nonestab
18) RING DRG NO BL9364243 LF NO 9001110645[90]() Specification : RING DRG NO BL9364243 LF NO 9001110645 C Nonestab
19) RING DRG NO 14548241658 LF NO 9927089073[99]() Specification : RING DRG NO 14548241658 LF NO 9927089073 C Nonestab
20) HOLDER DRG NO M2731102 LF NO 9927089088[99]() Specification : HOLDER DRG NO M2731102 LF NO 9927089088 C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) HOLDER LF NO 7440201960[74]() Specification : HOLDER LF NO 7440201960 C Nonestab
2) HOLDER PZU7 LF NO 7446001480[74]() Specification : HOLDER PZU7 LF NO 7446001480 C Nonestab
3) SET OF WASHERS LF NO 7432412053[74]() Specification : SET OF WASHERS LF NO 7432412053 C Nonestab
4) CATCH LOCATOR LF NO 7440205760[74]() Specification : CATCH LOCATOR LF NO 7440205760 C Nonestab
5) BLOCK LF NO 7440205828[74]() Specification : BLOCK LF NO 7440205828 C Nonestab
6) BODY LF NO 7440206297[74]() Specification : BODY LF NO 7440206297 C Nonestab
7) ROLLER LF NO 7440206892[74]() Specification : ROLLER LF NO 7440206892 C Nonestab
8) FLANGE LF NO 7440206894[74]() Specification : FLANGE LF NO 7440206894 C Nonestab
9) COUNTER WEIGHT LF NO 7440206895[74]() Specification : COUNTER WEIGHT LF NO 7440206895 C Nonestab
10) BODY LF NO 7440206896[74]() Specification : BODY LF NO 7440206896 C Nonestab
11) FLANGE LF NO 7440206897[74]() Specification : FLANGE LF NO 7440206897 C Nonestab
12) BUSHING LF NO 7440206898[74]() Specification : BUSHING LF NO 7440206898 C Nonestab
13) PLUG LF NO 7440206899[74]() Specification : PLUG LF NO 7440206899 C Nonestab
14) COVER LF NO 7440206901[74]() Specification : COVER LF NO 7440206901 C Nonestab
15) COVER LF NO 7440206902[74]() Specification : COVER LF NO 7440206902 C Nonestab
16) COVER LF NO 7440206903[74]() Specification : COVER LF NO 7440206903 C Nonestab
17) BUSHING LF NO 7440206904[74]() Specification : BUSHING LF NO 7440206904 C Nonestab
18) RING LF NO 7440206905[74]() Specification : RING LF NO 7440206905 C Nonestab
19) BUSHING LF NO 7440206906[74]() Specification : BUSHING LF NO 7440206906 C Nonestab
20) SETTING PIECE LF NO 7440206907[74]() Specification : SETTING PIECE LF NO 7440206907 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SUPPLY OF REAR SIGHT LEAF AS PER DRG NO K 2021STR WITH FIRMS MATERIAL[70]() Specification : ASUPPLY OF REAR SIGHT LEAF AS PER DRG NO K 2021STR WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SUPPLY OF REAR SIGHT LEAF AS PER DRG NO K 2021STR WITH FIRMS MATERIAL[70]() Specification : ASUPPLY OF REAR SIGHT LEAF AS PER DRG NO K 2021STR WITH FIRMS MATERIAL C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) Tripod Assembly to drawing number 45P 6000 required for AGS 30[70]() Specification : As per drawing and specification. E Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL[70]() Specification : BIPOD ASSEMBLY AS PER DRG NO PKM 7100 WITH FIRMS MATERIAL E Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) BODY LF 7440206798[74]() Specification : BODY LF 7440206798 C Nonestab
2) PLUG LF 7441120925[74]() Specification : PLUG LF 7441120925 C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) AXLE LF 7440200903[74]() Specification : AXLE LF 7440200903 C Nonestab
2) RING LF 7440201927[74]() Specification : RING LF 7440201927 C Nonestab
3) LOCATOR LF 7440205997[74]() Specification : LOCATOR LF 7440205997 C Nonestab
4) FLANGE LF 7440205999[74]() Specification : FLANGE LF 7440205999 C Nonestab
5) SCREW LF 7440206911[74]() Specification : SCREW LF 7440206911 C Nonestab
6) HOLDER LF 7440206913[74]() Specification : HOLDER LF 7440206913 C Nonestab
7) HOLDER LF 7440206915[74]() Specification : HOLDER LF 7440206915 C Nonestab
8) PLUNGER LF 7440206916[74]() Specification : PLUNGER LF 7440206916 C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) COVER LF NO 7440201430[74]() Specification : COVER LF NO 7440201430 C Nonestab
2) BODY LF NO 7440205827[74]() Specification : BODY LF NO 7440205827 C Nonestab
Category : p
Grade : 3
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) BODY LF 7440206909[74]() Specification : BODY LF 7440206909 C Nonestab
2) BODY LF 7440207034[74]() Specification : BODY LF 7440207034 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) Tripod Assembly to drawing number 45P 6000 required for AGS 30[70]() Specification : As per drawing and specification. E Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) FRONT SIGHT ASSY K1030[70]() Specification : K1030 E Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) FRONT SIGHT BLOCK BLANK S3 L F No 7024012072[70]() Specification : AS ER DRG No.TEND 2508 (for K 1207) R Nonestab
2) REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5[70]() Specification : REAR SIGHT BLOCK BLANK S3 AS PER DRG NO TEND 2509 STAR 4 FOR K 1202 STAR 5 C Nonestab
3) BLADE FORE SIGHT 29P 0004STAR required for 0POINPOINT315 Sporting Rifle[70]() Specification : AS PER DRG. No.29P 0004* required for 0.315" Sporting Rifle C Nonestab
4) PIN FIXING BAND BACK SIGHT TO DRG No 29P 0006 required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG.No.: 29P 0006 required for 0.315" Sporting Rifle C Nonestab
5) SPRING LEAF BED BACK SIGHT TO DRG NO 29P 0008 required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG. NO.29P 0008 required for 0.315" Sporting Rifle C Nonestab
6) BED BACKSIGHT ASSEMBLY CONSISTING OF PARTS BED BACKSIGHT 29 P 0007 LEAF BED BACK SIGHT 300 YARDS 29 P 0010 AND PIN LEAF BED BACK SIGHT 29 P 0011 required for 0POINT315 Sporting Rifle[70]() Specification : AS PER DRG CONSISTING OF PARTS BED BACKSIGHT (29 P 0007)LEAF BED BACK SIGHT 300 YARDS (29 P 0010) AND PINLEAF BED BACK SIGHT (29 P 0011) required for 0.315" Sporting Rifle C Nonestab
7) WRENCH ADJUSTING FORESIGHT AND LOCK NUT FORE SIGHT TO DRAWING NO R F I SK NO 1051 STR3 MODIFIED FOR RIFLE 7POINT62 mm1A1[70]() Specification : AS PER DRAWING NO.R.F.I.SK.NO.1051 *3 (MODIFIED)(FOR RIFLE 7.62 mm1A1) E Nonestab
8) SCREW ZEROING BACK SIGHT TO D S CAT NO 5305 018164 FULLY FINISHED CONDITION WITH FIRM MATERIAL ICR 1229[70]() Specification : AS PER D.S. CAT NO.5305-018164 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1229) C Nonestab
9) NUT LOCK FORESIGHT TO D S CAT No 5310 003169 D C No 24755 SA DATED 21 06 2000 FULLY FINISHED CONDITION WITH FIRMS MATERIAL[70]() Specification : AS PER D.S.CAT.No.: 5310-003169 D.C.No.: 24755-SA, DATED: 21/06/2000. FULLY FINISHED CONDITION WITH FIRM'S MATERIAL. C Nonestab
10) SIGHT ASSEMBLY AS PER DRG NO 36P 1300 WITH FIRMS MATERIAL FOR UBGL BULGARIA[70]() Specification : SIGHT ASSEMBLY AS PER DRG NO 36P 1300 WITH FIRMS MATERIAL FOR UBGL BULGARIA C Nonestab
11) BRACKET FORESIGHT[70]() Specification : AS PER DRAWING OF BRACKET FORESIGHT CAST DRAWING 6P 11 1 28 DRG NO 62 C 1028 250 A 3 C Nonestab
12) LEAF SIGHT REAR COMPONENT DRG NO 6P11 8 1 DRG NO 62 C 3801 200 C3[70]() Specification : AS PER DRAWING OF LEAF SIGHT REAR COMPONENT DRG NO 6P11 8 1 DRG NO 62 C 3801 200 C3 C Nonestab
13) BLADE SIGHT REAR COMPONENT DRG NO 6P 11 8 2 DRG NO 62 C 3802 200 C3[70]() Specification : AS PER DRAWING OF BLADE SIGHT REAR COMPONENT DRG NO 6P 11 8 2 DRG NO 62 C 3802 200 C3 C Nonestab
Category :
Grade : Grade III
Size : S
280 Ambattur Clothing Private Limited, Chennai
3/17,Madathu street,pollachi,coimbatore,642123 madathu street pollachi Tamil Nadu
PIN1 : 642123
Phone No. : 9842618736 		CHEA01529D

Download 		1Ordnance Clothing Factory Avadi

Name Specification Use Status
1) Fabrication of various garments() As per the Specification R NOT ESTABLISHED
Category : DDP,DP
Grade : I
Size : L

Copyright © 2025 - OFB