1) SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Nonestab
2) SUPPLY OF STUD AS PER DRG NO.K-1302 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO.K-1302 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK STAGE 2 FOR K 4001, K 5001, K 6001 AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL[00]()
Specification : AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CARRIER BLANK AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) STUD LEVER LOCK TO D.S. CAT NO.1005-001659 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1321)[70]()
Specification : AS PER D.S. CAT NO.1005-001659 (FULLY FINISHED CONDITION WITH FIRM MATERIAL) (ICR 1321)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PLUG GAS CYLINDER ASSEMBLY-AS PER DRG. NO.TEND 1905 (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1[70]()
Specification : AS PER DRG. NO.TEND 1905 (ICR-66 SA) (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL) REQD. FOR RIFLE 7.62MM 1A1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT SIGHT BLOCK BLANK S3 (L.F.No.7024012072)[70]()
Specification : AS ER DRG No.TEND 2508 (for K 1207)
R
Nonestab
2) REAR SIGHT BLOCK BLANK FOR TAR (L.F. No.7024012073)[70]()
Specification : AS PER DRG No.TEND :2509 (for K-1202)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SELECTOR LEVER AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG.NO.K 2074 WITH FIRM'S MATERIAL
C
Nonestab
2) PREMACHINED BLANK STAGE 2 FOR K 4001, K 5001, K 6001 AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL[00]()
Specification : AS PER DRG NO. TEND 2449 WITH OFT RAW MATERIAL
C
Nonestab
3) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL
C
Nonestab
4) SUPPLY OF HAMMER AS PER DRG NO K -2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Nonestab
5) BOLT CARRIER BLANK AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG No. TEND 2383 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL
C
Nonestab
2) PREMACHINED BLANK STAGE 2 FOR K 1205 AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL[70]()
Specification : AS PER DRG NO.TEND2450 WITH FIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRIGGER AS PER DRG NO K2064 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K-2064 WITH FIRMS MATERIAL
C
Nonestab
2) SUPPLY OF HAMMER AS PER DRG NO K 2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Nonestab
3) BOLT CARRIER BLANK AS PER DRG NO TEND 2383STR2[70]()
Specification : AS PER DRG NO TEND 2383 STR 2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BLOCK HOUSING TO DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302[70]()
Specification : AS PER DRG No TEND 1888 FULLY FINISHED CONDITION WITH FIRMS MATERIAL FOR ICR 1302
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BUSH CYLINDER GAS TO D.S. CAT. NO. 3120-004656 (ICR-1241)TO D.C. NO.23506-SA, DATED 27.09.1996 (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL)[70]()
Specification : AS PER D.S. CAT. NO. 3120-004656 (ICR-1241)TO D.C. NO.23506-SA, DATED 27.09.1996 (FULLY FINISHED CONDITION WITH FIRM'S MATERIAL)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432[70]()
Specification : BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PORT BLOCK AS PER DRG No K1205 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. No.K-1205 WITH FIRM'S MATERIAL
C
Nonestab
2) SUPPLY OF GAS PISTON AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL
C
Nonestab
3) SUPPLY OF FRONT SIGHT BLOCK AS PER DRG No K1207 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG. NO. K-1207 WITHFIRM'S MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PREMACHINED BLANK FOR TAR TRUNNION K 4002 COMPONENT AS PER DRG NO TEND 2616[70]()
Specification : PREMACHINED BLANK FOR TAR TRUNNION K 4002 COMPONENT AS PER DRG NO TEND 2616
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383STR3 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383STR3 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR FROM OFT MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER TO DRG NO TEND 2226STR FROM OFT MATERIAL
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Rifle Factory Ishapur
Name
Specification
Use
Status
1) MODIFIED LEVER CHANGE FOR ASSAULT RIFLE GHAATAK[70]()
Specification : MODIFIED LEVER CHANGE TO DRG NO. AR/012/1-ALT/RFI FOR 7.62MM ASSAULT RIFLE (GHAATAK)
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Engine Factory Avadi
Name
Specification
Use
Status
1) BEARING CAP OF 8TH SUPPORT TO DRG.NO.3301-187-A()
Specification : 3301-187-A
C
Estab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF HAMMER AS PER DRG NO K 2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) IC CROSS BOLT HOOK LATCH AS PER DRG NO: K-IC-4004[70]()
Specification : AS PER DRG NO: K-IC-4004
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 2031
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SELECTOR LEVER AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]()
Specification : AS PER DRG NO TEND 2573 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT SIGHT ASSY K1030[70]()
Specification : K1030
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PISTON AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF TRUNNION AS PER DRG NO K 4002 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. K 4002 WITH FIRMS MATERIAL
C
Nonestab
2) BLANK CARTRIDGE NOZZLE AS PER DRG No K 9022 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 9022 WITH FIRMS MATERIAL
C
Nonestab
3) SUPPLY OF HAMMER AS PER DRG NO K 2061 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K -2061 WITH FIRMS MATERIAL
C
Nonestab
4) FRONT SIGHT ASSY K1030[70]()
Specification : K1030
C
Nonestab
5) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG No K 2031
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) SUPPLY OF GAS PISTON AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO. TEND 2547 WITH FIRMS MATERIAL
C
Nonestab
2) LOWER HAND GUARD ASSY AS PER DRG NO K2040 WITH FIRMS MATERIAL[70]()
Specification : LOWER HAND GUARD ASSY AS PER DRG NO K2040 WITH FIRMS MATERIAL
C
Nonestab
3) BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383STR3 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE[70]()
Specification : BOLT CARRIER BLANK S3 AS PER DRG NO TEND 2383STR3 WITH FIRMS MATERIAL FOR TRICHY ASSAULT RIFLE
C
Nonestab
4) BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432[70]()
Specification : BARREL BLANK BEFORE COLD SWAGING WITH CHAMBER FOR BARREL TO DRG NO TEND 1295STR OF RIFLE 7POINT62MM 1A1 ICR 1432
C
Nonestab
Category : p
Grade : Grade II
Size :
S
1Heavy Vehicle Factory
Name
Specification
Use
Status
1) BUSH TO DRG NO 188 21 107[62]()
Specification : BUSH / 188.21.107
E
Nonestab
2) AIR VENT VALVE ASSY TO DRG NO 172 36 094CBCB[62]()
Specification : AIR VENT VALVE ASSY / 172.36.094CBCB
1) PAINT READYMIXED(MIDDLE BUFF) AIR DRYING SEMI GLOSSY,TYPE-BRUS HING CONSISTENCY[10]()
Specification : PAINT READYMIXED(MIDDLE BUFF) AIR DRYING SEMI GLOSSY,TYPE-BRUS HING CONSISTENCY TO SPECN:IS-168 - 2016, 4TH REVISION APPLICABLE FOR DEFENCE USE & COLOUR SHADE ISC NO.359 OF IS: 5-2007(6TH REVISION) REAF-2017. (TO BE SUPPLIED IN 5 LTRS P
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1011312220 PAINT OLIVE GREEN MATT FINISH[10]()
Specification : OF ISC-220 OF IS-5-1994 (FOURTH REVISION) REAF.2000 AMND NO.1.TO SPECN. IS-168-1993 THIRD REVISION
R
Nonestab
2) 1011312446 PAINT RED OXIDE MATT FINISH GEN PUR[10]()
Specification : ISC 446 OF IS: 5- 1994 (FOURTH REVISION) (AMDT-1) TO SPECN IS: 168-1993 (THIRD REVISION)
R
Nonestab
3) 1011518001 PAINT BLACK MATT FINISH SPRAYING[10]()
Specification : READY MIXED PAINT MARKING FOR PACKAGES AND PETROL CONTAINERS GOLDEN YELLOW TO COLOUR CODE ISC-356 OF IS:5-2004 (FIFTH REV) AMENDMENT NO.1 1995 CONFORMING TO IS:138-1992 (THIRD REV) MAKE ASIAN,NEROLACK,BERGER IS ACCEPTABLE.
R
Nonestab
Category : p
Grade : Grade I
Size :
S
1High Explosive Factory
Name
Specification
Use
Status
1) PAINT RM WHITE[10]()
Specification : IS: 138-1992 (3RD REV) REAFF 2009 AS APPLICABLE FOR DEFENCE USE. SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 DEGREES TO 50 DEGREES
P
Nonestab
Category : p
Grade : Grade I
Size :
S
1High Explosive Factory
Name
Specification
Use
Status
1) PAINT RFU ADMFRED[10]()
Specification : IS: 168-1993 (3RD REV) REAFF : 2012 (AS APPLICABLE FOR DEFENCE USE) WITH ADDL. CLAUSES AS PER CQA(ME) KIRKEE LETTER NO. CQA/ME/7209/UPS DT 16.02.89 & CQA/ME/7209/UPS/2 DT 24.10.90
P
Nonestab
Category : p
Grade : Grade I
Size :
S
1High Explosive Factory
Name
Specification
Use
Status
1) PAINT RM RED SIGNAL[10]()
Specification : IS: 138-1992 (THIRD REV) REAFF 2009 (AS APPLICABLE FOR DEFENCE USE ) SPECIAL REQUIREMENT SEMIGLOSSY FINISH WITH GLOSS VALUE 31 TO 50
P
Nonestab
Category : p
Grade : Grade I
Size :
S
1High Explosive Factory
Name
Specification
Use
Status
1) PAINT RFU FINI AMMN[10]()
Specification : SPECN IS: 168 - 1993 3RD REV REAFF. 2012 (AS APPLICABLE FOR DEFENCE USE) WITH ADDITIONAL CLAUSES AS PER CQA (ME) KIRKEE LETTER NO. CQA/ME/7209/UPS DT 16.02.89 AND CQA/ME 7209/UPS/2 DT 24.10.90
P
Nonestab
Category : p
Grade : Grade I
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) READY MIXED PAINT, AIR DRYING GENERAL PURPOSE (1011515359)[10]()
Specification : IS: 168-1993
P
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) paint ready mixed air drying matt finish for general purpose olive green (1011509314)[10]()
Specification : ISC-220 OF IS-5-2007 (6TH REV) TO SPECN IS-168-1993 (THIRD REV) (REAFFIRMED 2002) DC NO. 36851030- ME DT19-03-2001 AS APPLICABLE FOR DEFENCE USE)
P
Nonestab
2) PANT READY MIXED AIR DRYING MATT FINISH FOR GENERAL PURPOSE LIGHT GREY (1011341632)[10]()
Specification : ISC NO. 631 OF IS-5-2007 (SIXTH REVISION) TO SPECN IS-168-1993 (THIRD REVISION) (REAFFIRMED 2002) DC NO. 3685-ME 984 DT 19-3-01 AS APPLICABLE FOR DEFENCE USE.
1) paint ready mixed air drying matt finish for general purpose olive green item code 1011509314[10]()
Specification : ISC-220 OF IS-5-2007 (6TH REV) TO SPECN IS-168-1993 (THIRD REV) (REAFFIRMED 2002) DC NO. 36851030- ME DT19-03-2001 AS APPLICABLE FOR DEFENCE USE)
R
Nonestab
2) PAINT READY MIXED AIR DRYING MATT FINISH FOR GENERAL PURPOSE BRUSHING LIGHT BRUNSWICK GREEN ISC 225 IS 168 MF ITEM CODE 1011508225[10]()
Specification : PAINT L BRUNS GREEN ISC 225 IS 168 MF
R
Nonestab
3) paint red signal ISC 357 IS 138 SG ITEM CODE 1011538537[10]()
Specification : paint red signal ISC 357 IS 138 SG
R
Nonestab
4) READY MIXED PAINT MARKING SMOOTH AND MATT FINISH FOR PACKAGES AND PETROL CONTAINER BRUSHING STENCILING TO SPECN IS 138 1992 ITEM CODE 1011538002[10]()
Specification : READY MIXED PAINT MARKING SMOOTH AND MATT FINISH FOR PACKAGES AND PETROL CONTAINER BRUSHING STENCILING TO SPECN IS 138 1992 (3RD REV) (REAFF. 2014) WITH AMENDMENT NO.1 APRIL 2000, AS APPLICABLE FOR DEFENCE USE.
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) PAINT RFU BLACK ACID PROOF()
Specification : PAINT RFU BLACK ACID PROOF, TYPE-1 SPRAYING TO SPECN.IND/ME/651(A)DC 2404-ME DT.4.11.81
P
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) READY MIXED PAINT AIR DRYING WHITE SEMIGLOSSY FINISH FOR GENERAL PURPOSE BRUSHING TO SPECN. IS: 168-1993 (THIRD REVISION)()
Specification : READY MIXED PAINT AIR DRYING WHITE SEMIGLOSSY FINISH FOR GENERAL PURPOSE BRUSHING TO SPECN. IS: 168-1993 (THIRD REVISION)
P
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) VARNISH OIL STOVING(A.P.C.221)()
Specification : PAINT
P
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Kanpur
Name
Specification
Use
Status
1) PAINT READYMIXED AIR DRYING FOR GENERAL PURPOSE SEMIGLOSSY FINISH SPRAYING BUFF MIDDLE COLOUR TO(ISC-359) OF IS:5:1994(4TH REVISION) AMENDMENT NO.-1 TO IS:168:1993(THIRD REVISION)AS APPLICABLE FOR DEFENCE USE()
Specification : PAINT READYMIXED AIR DRYING FOR GENERAL PURPOSE SEMIGLOSSY FINISH SPRAYING BUFF MIDDLE COLOUR TO(ISC-359) OF IS:5:1994(4TH REVISION) AMENDMENT NO.-1 TO IS:168:1993(THIRD REVISION)AS APPLICABLE FOR DEFENCE USE
P
Nonestab
Category : p
Grade : Grade II
Size :
S
1Ordnance Factory Chanda
[ENR Registration]
Name
Specification
Use
Status
1) 1011312359 PAINT BUFF MIDDLE SGF GEN TO IS-168
Description : 1011312359 PAINT BUFF MIDDLE SGF GEN TO IS-168()
Specification : SPECN IS:5-1994 (FOURTH REVISION) WITH AMENDMENT NO. 1 TO SPECN. IS:168-1993 (THIRD REVISION)
P
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111
Description : PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111()
Specification : As per OFDC specification
C
Estab
2) READY MIXED PAINTS AIR DRYING MATT FOR GENERAL PURPOSE()
Specification : As per OFDC specification
C
Estab
3) PAINT PRIMING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT PRIMING CHLORINATED RUBBER TYPE SPRAYING()
Specification :As per OFDC specification
C
Estab
4) PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING()
Specification :As per OFDC specification
C
Estab
Category : dp
Grade : 3
Size :
S
1Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111
Description : PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111()
Specification : As per OFDC specification
C
Estab
2) READY MIXED PAINTS AIR DRYING MATT FOR GENERAL PURPOSE()
Specification : As per OFDC specification
C
Estab
3) PAINT PRIMING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT PRIMING CHLORINATED RUBBER TYPE SPRAYING()
Specification :As per OFDC specification
C
Estab
4) PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING()
Specification :As per OFDC specification
C
Estab
Category : dp
Grade : 3
Size :
S
1Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111
Description : PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111()
Specification : As per OFDC specification
C
Estab
2) READY MIXED PAINTS AIR DRYING MATT FOR GENERAL PURPOSE()
Specification : As per OFDC specification
C
Estab
3) PAINT PRIMING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT PRIMING CHLORINATED RUBBER TYPE SPRAYING()
Specification :As per OFDC specification
C
Estab
4) PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING()
Specification :As per OFDC specification
C
Estab
Category : dp
Grade : 3
Size :
S
1Ordnance Factory Dumdum
[ENR Registration]
Name
Specification
Use
Status
1) PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111
Description : PAINT PRE TREATMENT PRIMER (ETCHING PRIMER) TYPE SPRAYING FOR TU-1111()
Specification : As per OFDC specification
C
Estab
2) READY MIXED PAINTS AIR DRYING MATT FOR GENERAL PURPOSE()
Specification : As per OFDC specification
C
Estab
3) PAINT PRIMING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT PRIMING CHLORINATED RUBBER TYPE SPRAYING()
Specification :As per OFDC specification
C
Estab
4) PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING
Description : PAINT FINISHEING CHLORINATED RUBBER TYPE SPRAYING()
Specification :As per OFDC specification
C
Estab
Category : dp
Grade : 3
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) BRANDED PAINT MIDDLE BUFF READY MIX AIR DRYING SEMI-GLOSSY AS PER IS:168[10]()
Specification : AS PER IS:168
P
Estab
Category : p
Grade : Grade III
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) PAINT RM STEN SGF GOLDEN YELLOW[10]()
Specification : IS 138-1992 3RD REV.WITH A.NO.1
R
Nonestab
2) PNT SYNTH ENML BLACK IS:2392-1964[10]()
Specification : PAINT SYNTHETIC ENAMEL BLACK. ASIAN APCOLITE/BERGER LUXOL/J&N BROLAC MAKE ONLY ACCEPTABLE
R
Nonestab
3) PAINT RMADB SGF MIDDLE BUFF ISC 359[10]()
Specification : IS 168-1993(AS APPLICABLE FOR DEFENCE USE)(THIRD REVI SION)WITH ADDL CLAUSES AS PER CQA(ME) LET NO CQA/ME/7209/UPS DT. 16/02/89 & CQA/ME/7209/UPS-2 DT.24.10.90
R
Nonestab
4) PAINT RFU FINI AMN ADMFB OLIV GREEN[10]()
Specification : IS: 168-1993 (AS APPLICABLE FOR DEFENCE USE) WITH ADDITIONAL CLA USES AS PER CQA(ME)KIRKEE LETTER NO CQA/ME/7209/UPS DT.16/2/ 89 AND CQA/ME/7209/UPS/2 DT.24/10/90
R
Nonestab
5) PAINT RM MKG STEN BLACK AMMN[10]()
Specification : IS-138-1992 (THIRD REVISION) AS APPLICABLE FOR DEFENCE USE.
R
Nonestab
6) PAINT RM AMMN ADSGFS WHITE[10]()
Specification : IS:138-1992 (3RD REVISION) AS APPLICABLE FOR DEFENCE USE.SPECIAL REQUIREMENT
Specification : PAINT GOLDEN YELLOW, PREMIER GLOSS ENAMEL (NA) MAKE ASIAN PAINTS/DUCO/NEROLAC ONLY. TO BE SUPPLIED IN 1 OR 4 LTR. CANS.
R
Nonestab
9) DOVE GREY COLOUR FOR ROCKET RGB-60[10]()
Specification : DOVE GREY COLOUR POLY EURATHENE PAINT CHEMTHANE - 3300 BASE WITH ITS COMPONENTS VIZ. HARDNER & THINNER FOR ROCKET RGB-60
R
Nonestab
10) PAINT SYN.ENAMEL RED SIGNAL IS 2932[10]()
Specification : IS- 2932-2003 CONFORMING TO COLOUR CODE IS -5-2007 SHADE NO. 537 (SIXTH REVISION)
R
Nonestab
11) PAINT RM BRUSH MATT BLACK.IS-168-73[10]()
Specification : IS:168-1973 WITH AMENDMENT NO.1&2(AS APPLICABLE FOR DEFENCE USE) AND CLAUSES MENTIONED IN ATTACHED 'SCHEDULE' MUST BE FOLLOWED.
R
Nonestab
12) PAINT SYN.ENAMEL LIGHT GREY[10]()
Specification : IS 168 : 1993
R
Nonestab
13) PAINT OLIVE GREEN GLOSSY FINISH.[10]()
Specification : IS - 2932 - 1993 WITH AMMENDMENT NO.1 CONFORMING TO COLOUR CODE IS-5-1994 SHADE NO. 278
R
Nonestab
14) PAINT RFU MARKING GOLDEN YELLOW[10]()
Specification : IS:138-1981(AS APPLIACABLE FOR DEFENCE USE) AND CLAUES MENTI ONED IN ATTACHED SCHEDULE MUST FOLLOWED AS PER CQA(ME) LET.N O.CQA/ME/7209/UPS DT. 16/2/89 AND CQA/ME/7209/UPS/2 24/10/90
R
Nonestab
15) PAINT PFU BLACK AMMN AD BRSHNG MAT[10]()
Specification : IS 168-1993(3rd REVISION)
R
Nonestab
16) PAINT RM RED OXIDE ZINC CHROME.[10]()
Specification : JSS 8010-68 : 2008 REV.NO.2 DC 3930-ME
R
Nonestab
17) PAINT RMAD ISC NO 499 SERVICE BROWN[10]()
Specification : IS: 168-1973
R
Nonestab
18) PAINT RFUADMF RED SIGNAL[10]()
Specification : SPECN IS:168-1993 (3RD REV.) (AS APPLICABLE FOR DEFENCE USE) WITH ADDL.CLAUSES AS PER CQA(ME)KIRKEE LETTER NO CQA/ME/7209 /UPS DATED 16-02-89 & CQA/ME/7209/UPS/2 DT. 24/10/90
Specification : IS:138-1992 AS APPLICABLE FOR DEFENCE USE
R
Nonestab
21) PAINT RFU SGF BLUE AZURE[10]()
Specification : IS 168:1993 (THIRD REVISION)(AS APPLICABLE FOR DEFENCE USE)
R
Nonestab
22) PAINT RM MKG AIR DRYING SEMIGLOSSY[11]()
Specification : PAINT RM MAKING AIR DRYING SEMIGLOSSY FINISH STENCILLING WHITE
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) PAINT RM STEN SGF GOLDEN YELLOW[10]()
Specification : IS 138-1992 3RD REV.WITH A.NO.1
R
Nonestab
2) PNT SYNTH ENML BLACK IS:2392-1964[10]()
Specification : PAINT SYNTHETIC ENAMEL BLACK. ASIAN APCOLITE/BERGER LUXOL/J&N BROLAC MAKE ONLY ACCEPTABLE
R
Nonestab
3) PAINT RMADB SGF MIDDLE BUFF ISC 359[10]()
Specification : IS 168-1993(AS APPLICABLE FOR DEFENCE USE)(THIRD REVI SION)WITH ADDL CLAUSES AS PER CQA(ME) LET NO CQA/ME/7209/UPS DT. 16/02/89 & CQA/ME/7209/UPS-2 DT.24.10.90
R
Nonestab
4) PAINT RFU FINI AMN ADMFB OLIV GREEN[10]()
Specification : IS: 168-1993 (AS APPLICABLE FOR DEFENCE USE) WITH ADDITIONAL CLA USES AS PER CQA(ME)KIRKEE LETTER NO CQA/ME/7209/UPS DT.16/2/ 89 AND CQA/ME/7209/UPS/2 DT.24/10/90
R
Nonestab
5) PAINT RM MKG STEN BLACK AMMN[10]()
Specification : IS-138-1992 (THIRD REVISION) AS APPLICABLE FOR DEFENCE USE.
R
Nonestab
6) PAINT RM AMMN ADSGFS WHITE[10]()
Specification : IS:138-1992 (3RD REVISION) AS APPLICABLE FOR DEFENCE USE.SPECIAL REQUIREMENT
Specification : PAINT GOLDEN YELLOW, PREMIER GLOSS ENAMEL (NA) MAKE ASIAN PAINTS/DUCO/NEROLAC ONLY. TO BE SUPPLIED IN 1 OR 4 LTR. CANS.
R
Nonestab
9) DOVE GREY COLOUR FOR ROCKET RGB-60[10]()
Specification : DOVE GREY COLOUR POLY EURATHENE PAINT CHEMTHANE - 3300 BASE WITH ITS COMPONENTS VIZ. HARDNER & THINNER FOR ROCKET RGB-60
R
Nonestab
10) PAINT SYN.ENAMEL RED SIGNAL IS 2932[10]()
Specification : IS- 2932-2003 CONFORMING TO COLOUR CODE IS -5-2007 SHADE NO. 537 (SIXTH REVISION)
R
Nonestab
11) PAINT RM BRUSH MATT BLACK.IS-168-73[10]()
Specification : IS:168-1973 WITH AMENDMENT NO.1&2(AS APPLICABLE FOR DEFENCE USE) AND CLAUSES MENTIONED IN ATTACHED 'SCHEDULE' MUST BE FOLLOWED.
R
Nonestab
12) PAINT SYN.ENAMEL LIGHT GREY[10]()
Specification : IS 168 : 1993
R
Nonestab
13) PAINT OLIVE GREEN GLOSSY FINISH.[10]()
Specification : IS - 2932 - 1993 WITH AMMENDMENT NO.1 CONFORMING TO COLOUR CODE IS-5-1994 SHADE NO. 278
R
Nonestab
14) PAINT RFU MARKING GOLDEN YELLOW[10]()
Specification : IS:138-1981(AS APPLIACABLE FOR DEFENCE USE) AND CLAUES MENTI ONED IN ATTACHED SCHEDULE MUST FOLLOWED AS PER CQA(ME) LET.N O.CQA/ME/7209/UPS DT. 16/2/89 AND CQA/ME/7209/UPS/2 24/10/90
R
Nonestab
15) PAINT PFU BLACK AMMN AD BRSHNG MAT[10]()
Specification : IS 168-1993(3rd REVISION)
R
Nonestab
16) PAINT RM RED OXIDE ZINC CHROME.[10]()
Specification : JSS 8010-68 : 2008 REV.NO.2 DC 3930-ME
R
Nonestab
17) PAINT RMAD ISC NO 499 SERVICE BROWN[10]()
Specification : IS: 168-1973
R
Nonestab
18) PAINT RFUADMF RED SIGNAL[10]()
Specification : SPECN IS:168-1993 (3RD REV.) (AS APPLICABLE FOR DEFENCE USE) WITH ADDL.CLAUSES AS PER CQA(ME)KIRKEE LETTER NO CQA/ME/7209 /UPS DATED 16-02-89 & CQA/ME/7209/UPS/2 DT. 24/10/90
1) Assy. Spring Front & Rear
Description : Assy. Spring Front & Rear()
Specification : B3107201-B.02, B3205901-HASH.2
C
Estab
Category : p
Grade : 1
Size :
S
1Vehicle Factory Jabalpur
Name
Specification
Use
Status
1) LPTA A SET OF ASSY SPRING F REAR[90]()
Specification : A SET OF ASSY.SPRING FRONT & REAR CONSISTING OF 1 NO.OF ASSY FRONT SPRING (DRG.NO.2154-3210-0401V5)NON DRIVERS SIDE TO PART.NO.2154-3210-0101,1NO.OF DRIVERS SIDE(DRG.NO.2154-3210-0401V5)PT.NO.2154-3210-0102 AND 2NOS OF ASSY.REAR SPRING TO
1) 6570250501 ANTISTATIC POLYPROPYLENE IMPACT CO POLYMER CORRUGATED SHEET PPCS ANNULAR DIS DIA 128 MM X 06 MM SPECIFICATION OFCH SPECN PP 102 DRG NO FQ CA V 131 A[65]()
Specification : ANTISTATIC POLYPROPYLENE IMPACT CO-POLYMER CORRUGATED SHEET(PPCS) ANNULAR DIS DIA 128 MM X 06 MM. SPECIFICATION : OFCH/SPECN/PP/102 DRG NO.FQ/CA/V/131-A
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Gun and Shell Factory
Name
Specification
Use
Status
1) POLYPROPYLENE CORRUGATED PACKING BOX TO DRG NO CO 520[14]()
Specification : AS PER DRAWING
P
Nonestab
Category :
Grade : Grade III
Size :
M
1Gun and Shell Factory
Name
Specification
Use
Status
1) POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437 A IN F/C[14]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Gun and Shell Factory
Name
Specification
Use
Status
1) POLYPROPYLENE CORRUGATED PACKING BOX CO 437[14]()
Specification : POLYPROPYLENE CORRUGATED PACKING BOX TO DRG. NO. CO-437
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Gun and Shell Factory
Name
Specification
Use
Status
1) POLYPROPYLENE CORRUGATED PACKING BOX TO DRG NO CO 484 A[14]()
Specification : AS PER DRAWING
P
Nonestab
2) POLYPROPYLENE CORRUGATED PACKING BOX TO DRG NO CO 485[14]()
Specification : AS PER DRAWING
P
Nonestab
3) POLYPROPYLENE CORRUGATED PACKING BOX TO DRG NO CO 490 B[14]()
2) STEEL BLANK OF RECEIVER PLATE LEFT AND RIGHT[70]()
Specification : STEEL BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG.SKM-960* THE PROFILE & REFERENCE HOLES (DIA 13.39+/-0.02 & DIA 18.025 +/-0.02) TO BE DONE SIMULTANEOUSLY IN BOTH PLATES KEPT TOGETHER ONE ABOVE ANOTHER & NUMBERED TO MEKE SET. DRG.SKM-884*2
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Hand Guard for LMG 7 62 51mm Belt Fed as per drawing no1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA[70]()
Specification : Hand Guard for LMG 7.62X51mm Belt Fed as per drawing no. 1804 01 00 00 00 001 00DA and 1804 01 00 00 00 002 00DA.
C
Nonestab
2) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Nonestab
3) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
4) SIGHT LEAF DRG No SK 6540 TE[70]()
Specification : SIGHT LEAF DRG No SK-6540/TE
C
Nonestab
5) SLIDE DRG No SK 6534 TE[70]()
Specification : SLIDE DRG No SK-6534/TE
C
Nonestab
6) LATCH DRG No SK 6535 TE[70]()
Specification : LATCH DRG No SK- 6535 /TE
C
Nonestab
7) PIN DRG No SK 6531 TE[70]()
Specification : PIN DRG No SK- 6531/ TE
C
Nonestab
8) RIVET SK 6529 TE[70]()
Specification : RIVET SK- 6529/ TE
C
Nonestab
9) RAIL SK 6548 TE[70]()
Specification : RAIL SK-6548/ TE
C
Nonestab
10) OILER ASSEMBLY SK 6641 TE[70]()
Specification : OILER ASSEMBLY SK- 6641/TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Cleaning Rod Drg No SK 6574 TE[70]()
Specification : Cleaning Rod Drg No. SK- 6574/ TE
C
Nonestab
2) RIVET SK 6529 TE[70]()
Specification : RIVET SK- 6529/ TE
C
Nonestab
3) OILER ASSEMBLY SK 6641 TE[70]()
Specification : OILER ASSEMBLY SK- 6641/TE
C
Nonestab
4) Pin SK 6508 TE[70]()
Specification : Pin SK- 6508 /TE
C
Nonestab
5) RECEIVER FOR GPMG WITHOUT HEAT TREATMENT[70]()
Specification : RECEIVER FOR GPMG 7.62X51MM WITHOUT HEAT TREATMENT DRG. NO. SK-GPMG-6258
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) Guide Piece Cocking for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 005 00DB[70]()
Specification : Guide Piece Cocking for 9X19 mm Machine Pistol as per Drg No 2101 01 02 01 05 005 00DB
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Clothing Factory Shahjahanpur
Name
Specification
Use
Status
1) PLASTIC ANTIQUE TIP BLACK[21]()
Specification : LT.NO.TS/COAT ICK(ARMY LOGO)DT.4.8.2009 ] PLASTIC ANTIQUE TIP BLACK (HIGH DENSITY POLYETHYLENE) SPECN: AS PER DRAWING NUMBER CFS/SK, DATED 30/04/2011 AND SAMPLE HELD IN CUSTODY OF OCFS
1) C R GM STRIP 148 MM 9 MM CUP ITEM CODE 0710161148[90]()
Specification : C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 0.56+0.02-0.0 MM THICK, 148+2.0-0.0 MM WIDE IN COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM PER 3 METE
R
Estab
2) STRIP FOR G M CUP 7 POINT 62 MM TRACER ITEM CODE 0710160166[90]()
Specification : C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.66±0.02 MM THICK, 148+1.0-0.0 MM WIDE, COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA , OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM IN 3 METER MAX
R
Estab
3) CONV G M SCRAP TO STRIP 1 POINT 08 MM ITEM CODE 7005080005[90]()
Specification : CONV. GM SCRAP TO STRIP 1.08 MMT ITEM DESC : CONV. OF GM SCRAP TO C.R. STRIP ANNEALED & PICKLD READY TO CUP TO SIZE: 1.08±0.01 MM THX138±2.00-0.00 MM WIDE COIL WT WT. 90 TO 120 KGS. INT DIA OF COIL 300-400 MM CONFIRMING TO IS 2768 (LATE
R
Estab
4) CONVERSION GM SCRAP TO STRIP POINT 150 X 1 POINT 57 ITEM CODE 7005080015[90]()
Specification : CONV. GM SCRAP TO STRIP .150X1.57 ITEM DESC: CONVERSION OF GILDING METAL SCRAP TO STRIP, SIZE: 150 MM+2 MM/0.00 MM WIDE X 1.57 MM+0.015/-0.015 MM TH., SPCN. IS: 2768 (LATEST ISSUE) OR JSS-4710-1 GR.II ROLLED ANNEALED IN COIL FROM 1/D 300-
R
Estab
5) CONVERSION GM SCRAP TO STRIP 0 POINT 56 MM T ITEM CODE 7005070001[90]()
Specification : CONVERSION OF G.M SCRAP TO C. R STRIP ANNEALED & PICKLED READY TO CUP SIZE : 148+2-0 MM W X 0.56+0.02-0.00MM TH. COIL WT: 90 TO 130 KG . INT. DIA OF COIL: 300 TO 400 MM. CONFORMING TO IS : 2768/ (LATEST ISSUE) BOW LIMIT : 5MM PER 3 m MAX.
Specification : ADAPTER TO CQA(A) DRG. NO. 02676-20011A02, DC-37535-A DT. 22-10-2019 FOR 155 MM ERFB.
C
Estab
Category :
Grade : Grade III
Size :
S
2574
S. M. Engineering Works
Ichapur, Sealdanga, Santragachi (74 No. Bus Stand Howrah Sealdanga Howrah West Bengal
PIN1 : 711104
Phone No. : 3326536771 GSTIN :
19ADXPM4056C1Z7
1) GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN IND ME 951 PROV GRADE A DC 3774 ME DT 28 07 2003
Description : GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN IND ME 951 PROV GRADE A DC 3774 ME DT 28 07 2003()
Specification : GLASS FIBRE FILLED PHENOLIC MOULDING MATERIAL TO SPECN. IND/ME/951(PROV)GRADE "A" DC 3774-ME DT.28.07.2003.
1) EXTRUDED BRASS TUBE TO SPECN BS EN 12454 1999 SYMBOL CuZn30A No CW 707R MATERIAL CONDITION WITH HARDNESS 130 HV MIN HAVINGSTRAIGHT LENGTH OF 2 MTRS MIN SIZE 25point 5 0 point15 MM OD 21 point15 MM ID[00]()
Specification : EXTRUDED BRASS TUBE TO SPECN BS EN-12454 1999 SYMBOL CuZn30A No CW 707R MATERIAL CONDITION WITH HARDNESS 130 HV MIN HAVINGSTRAIGHT LENGTH OF 2 MTRS MIN SIZE :25.5+/-0.15 MM OD X 21.5 +/-0.15 MM ID
R
Estab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) COPPER TUBE 35 mm plus min o point 15 mm OD X2 point 5 mm plus minus 0 point 3mm WALL THICKNESS X1 TO 3 MTRS LONG SPECN JSS 4710 01 2007 REV NO 4 GR 1 IN EXTRUDED AND DRAWN CONDN TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN O CONDITION[07]()
Specification : COPPER TUBE 35mm +/- 0.15 O/D X2.5 mm +/- 0.3 WALL THICKNESS X1.5 TO 3 MTRS LONG SPEC: JSS 4710-01-2007( REV. NO-4) GR. 1 IN EXTRUDED AND DRAWN CONDN. TEST PIECE DRAWN FROM THE BULK TO BE TESTED IN "O" COND. TO ACHIEVE MECHANICAL PROPERT
