List of registered vendors

Search

Reset

 

Sort by

No Name, Address & Phone No. Vendor Code Factory Products Category, Grading, Size
2541 B P Engineers Pvt Ltd
G 6 Murli Bhawan 10 A Ashok Marg Lucknow Uttar Pradesh
PIN1 : 226001
Phone No. : 2286579
GSTIN : 09AAACB9954D1ZK 		LKNB05013B

Download 		1Ordnance Factory Ambajhari

Name Specification Use Status
1) Conversion of Fuze Holder To OFAJ Drg No FS3025 into FUZE Holder Assembly To OFAJ Drg No FS 3027 By Vulcanization[00]() Specification : Conversion of Fuze Holder To OFAJ Drg. No. FS-3025 into FUZE Holder Assembly To OFAJ Drg. No. FS-3027 By Vulcanization. R Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) CONVERSION OF STEEL CUP TO DRG NO ARDE 2120 DET NO 11 SHEET NO 3 INTO STEEL CUP WITH SEAL TO DRG ARDE 2120 DET NO 10 WITH TEST CERTIFICATE OF OZONE CHAMBER FOR SHELF LIFE OF 08 YEARS[00]() Specification : CONVERSION OF STEEL CUP TO DRG NO ARDE 2120 DET NO 11 SHEET NO 3 INTO STEEL CUP WITH SEAL TO DRG ARDE 2120 DET NO 10 WITH TEST CERTIFICATE OF OZONE CHAMBER FOR SHELF LIFE OF 08 YEARS C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Parachute Factory

Name Specification Use Status
1) PATCH ROUND WITH D RING[20]() Specification : AS PER SPECIFICATION C Nonestab
2) PATCH RUBBER WITH HANDLE[2010990470]() Specification : IND/ENG/PROV/1180/c R Nonestab
3) PATCH OVAL WITH TRAPEZODIAL RING[2010990471]() Specification : IND/ENG/PROV/1180/c R Nonestab
Category : p
Grade : Grade I
Size : S
2542 MICRO INDIA ENGINEERING
351, Sr. No. 28/3/1, Ambegaon Khurd, Near Jambhulwadi Lake, Pune -411 046. Near Jambhulwadi Lake Pune Maharashtra
PIN1 : 411046
Phone No. : 68014576
GSTIN : 27AALFM4554E1Z6 		PNEM10166C

Download 		1Rifle Factory Ishapur

Name Specification Use Status
1) TRIGGER (FINISH) FOR PISTOL AUTO 9MM 1A.[70]() Specification : TRIGGER(FINISH) TO DS.CAT NO 1005-003184 (DC-25575-SA) [MACROETCH TEST WILL BE AS PER COL.(D) OF SL.NO.1 OF CQA(SA)NOTE SHEET NO.1] FOR PISTOL AUTO 9MM 1A. C Nonestab
2) EXTRACTOR SMALL ARMS CARTRIDGE FOR RIFLE 5.56MM INSAS[70]() Specification : EXTRACTOR SMALL ARMS CARTRIDGE TO D.S. CAT NO.1005-007756 (DC-26658-SA DT.01/08/12 (THROUGH MIM ROUTE)MACRO ETCH TEST TO CONFORM ASTME 381-84 STD.C2R2S2 FOR PLATE 1&NIL FOR PLATE2.NMIR TEST AS PER IS:4163-82WITH ACCEPTANCE STD.3 FOR THIN C Nonestab
3) SLIDE FINISH FOR 9MM AUTO PISTOL[70]() Specification : SLIDE TO DS.CAT. NO. 1005-003210(LT.DC-26822-SA DT.22-4-16) [MACRO ETCH TEST,DETERMINATION OF INCLUSION CONTENT AND SAM-PLING PLAIN REFER TO CQA(SA) NOTE SHEET NO.1 OF LATEST ISSUEAGAINST COLUMN "NATURE" C.] FOR PISTOL AUTO 9MM 1A. C Nonestab
4) MAGAZINE COVER PIPE FOR 12 BORE MODIFIED PUMP ACTION GUN, RFI DRG.NO. PAG-0009[70]() Specification : MAGAZINE COVER PIPE FOR 12 BORE MODIFIED PUMP ACTION GUN, RFI DRG.NO. PAG-0009 C Nonestab
5) LANYARD FOR PISTOL AUTO 9MM 1A.[70]() Specification : LANYARD,PISTOL,OG 35-IN.DOUBLE TO SPECN.NO.E&S 3214-B(WS)/1 CLASS-'A' TO DS CAT NO.1005-001474 (DC-26237-SA(DT. 18.07.06)FOR PISTOL AUTO 9MM 1A C Nonestab
6) EXTRACTOR FOR 9MM AUTO PISTOL 1A.[70]() Specification : EXTRACTOR TO DS CAT NO.5120-007879(LT.DC-26820-SADT.26.04.16(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PER COL.(C) OFSL.NO.1 OF CQA(SA) NOTE SHEET NO.1.)& (NMIR TEST TO IS:4163 WILL BE AS PER COL.(C)OF SL.NO.3 OF CQA(SA) NOTE SHEET NO. C Nonestab
7) BLOCK REAR BLANK (MODIFIED) RIFLE 5.56MM INSAS FOLDING BUTT (STEEL).[70]() Specification : BLOCK REAR BLANK (MODIFIED) RIFLE 5.56MM INSAS FOLDING BUTT (STEEL). C Nonestab
8) PISTON EXTENSION UPTO STAGE VII FOR RIFLE 5.56MM INSAS.[70]() Specification : PISTON EXTENSION UPTO STAGE VII AS PER RFI SK NO.6943*3-S WITH FIRM'S MATERIAL. FOR RIFLE 5.56 MM INSAS. C Nonestab
9) FLASH ELIMINATOR FOR RIFLE 5.56MM LMG (TO BE USED IN RIFLE 5.56MM EXCALIBUR)[70]() Specification : FLASH ELIMINATOR FOR 5.56MM LMG TO DS CAT NO.1005-007962 (ARDE SK NO 2689/224) (TO BE USED IN RIFLE 5.56 MM EXCALIBUR) C Nonestab
10) LEVER SLIDE LOCKING (SEMI FINISHED) FOR FOR PISTOL AUTO 9MM 1A.[70]() Specification : LEVER SLIDE LOCKING BLANK AS PER RFI SK 8035*3 FOR PISTOLAUTO 9MM 1A C Nonestab
11) LOCKING PIECE FOR 9MM PISTOL AUTO 1A.[70]() Specification : BS:970 PT.I:1983 GR.665 M17 OR IS:4432 : 1988 DESIGNATION 20Ni 7Mo 2. C Nonestab
12) BLADE FORE SIGHT FOR 9MM PISTOL AUTO 1A.[70]() Specification : AMENDED C Nonestab
13) BODY FOR 0.22[70]() Specification : BS 970 EN 19A (T-CONDITION) WITH NON METALLIC INCLUSION RATING TEST C Nonestab
14) SEAR FOR 9MM AUTO PISTOL 1A.[70]() Specification : IS:3748 : 1990 DESIGNATION 75 T-6 C Nonestab
15) GAS REGULATOR FOR RIFLE 5.56MM.INSAS[70]() Specification : REGULATOR GAS. TO D S CAT NO.1005-007746 (DC-26518-SA)FOR RIFLE 5.56MM.INSAS.(TP TO CONFORM 300-350 HV AFTER H & T.MACRO ETCH TEST AS PERASTME 381-84 WITH ACCEPTANCE STD.C2,R2,S2 FOR PLATE -I & NILFOR PLATE II). C Nonestab
16) WHEEL LOCK TO DSCAT NO.1005-560045 (DC-26554-SA)[79]() Specification : WHEEL LOCK TO DSCAT NO.1005-560045 (DC-26554-SA)FOR RIFLE 5.56MM INSAS. C Nonestab
17) FLASH ABSORBER (WITHOUT PHOSPHATING)[79]() Specification : FLASH ABSORBER (WITHOUT PHOSPHATING)TO RFI.SK.-7770-S{DS CATNO.1005-007739(DC-24638-SA)}.NMIR TEST ASPER IS:4163-82 WITHACCEPTANCE STD.BETTER THAN 3(THIN)& 1(THICK)FOR A,B,C,D &MACRO ETCH TEST ASPER ASTME-381-84 WITH ACCPT.LIMIT C2 R2 S2F C Nonestab
18) CYLINDER GAS FOR RIFLE 5.56MM INSAS[70]() Specification : CYLINDER GAS TO DSCAT NO.1005-560066(LATEST DC-25824-SA DT.29/07/03) FOR RIFLE 5.56MM INSAS C Nonestab
19) TRIGGER FINISH TO DRG NO.PS32-112(FROM TRADE FINISH).FOR 0.32[70]() Specification : TRIGGER FINISH TO DRG NO.PS32-112(FROM TRADE FINISH).FOR 0.32" PISTOL C Nonestab
20) CONNECTOR BUTT EXR. FOR 5.56MM EXCALIBUR[70]() Specification : CONNECTOR BUTT EXR. FOR 5.56MM EXCALIBUR TO RFI SK.NO.7326 C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Khamaria

Name Specification Use Status
1) BOX H 60 MK I NEW W O FMT ARMY and NVL LF 6570010000[65]() Specification : BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG LIST NO ARM-1253, NO.OF SHEETS-3, SHEET-1 R.NO.9 DT.7-3-2002 SHEET-2 R.NO.5 DT.31-7-96 SHEET-3 R.NO.NIL DT 2-3-98 TO DRG NO.ARM-1253-D1(WITHOUT-FITMENTS) R.NO.6 DT.27-6-96. SPECN.: IA-1169(n)DC-35576 C Nonestab
2) CATCH LOCK ASSY DRG NO IA 053 4 CO item code 9911358061[99]() Specification : CATCH LOCK ASSY AS PER DRG NO.IA-1053 SHT 1,SHT 2,SHT 3, SHT 4 & SHT 5 SET OF 04 COMPONENTS (ONE EACH). 1-CATCH,2-LINK,3-HOOK PLATE,4-HASP C Nonestab
3) STABILIZING TUBE F1301-026223-D (9911334347)[99]() Specification : STABILIZING TUBE TO DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78. C Nonestab
4) CARTG PP3 EOFE EMPTY ASSY TRD 1279 LF 9911351544[99]() Specification : CARTG PP-3 EOFE & EMPTY (ASSY) TO DRG. NO. TRD/1279 & SPECN NO. ARDE/SPECN/23 C Nonestab
5) BOOSTER CUP and PIN FOR 84MM HEAT 551 LF 9911358084[99]() Specification : SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ). C Nonestab
6) LINER SCREW DRG.NO.TRD-1-2-2321(551) (9911357822)[99]() Specification : LINER SCREW DRG.NO.TRD-1-2-2321./ LINER SCREW TO DRG.NO. 5209558 C Nonestab
7) LOCK WASHER JZE-2.55 (HEAT-551) (9911357867)[99]() Specification : LOCK WASHER JZE-2.55 TO DRG.NO.TRD-1-2-2269. C Nonestab
8) MANTLE TO DRG.NO.TRD-2-2-2271 (9911357846)[99]() Specification : MANTLE TO DRG.NO.TRD-2-2-2271. C Nonestab
9) RIVET 2X10 TO DRG.NO.TRD-1-2-2239. (9911357870)[99]() Specification : RIVET 2x10 TO DRG.NO.TRD-1-2-2239. C Nonestab
10) SPACER TO DRG.NO.TRD-2-2-2273. (9911357855)[99]() Specification : SPACER TO DRG.NO.TRD-2-2-2273. C Nonestab
11) VALVE DRG NO 5209565 FOR 84HEAT 551 LF 9911357921[99]() Specification : VALVE TO DRG NO.5209 565/DRG.NO.TRD-2-2-2247. C Nonestab
12) SWITCH NO 5 EMPT WO SNOUT SWITCH LF 9911357321[99]() Specification : SWITCH NO 5 PRESSURE MK-1/L EMPTY ASSEMBLED TO DESIG REF NO.DD(L)15260 DC36836-A DT. 14-6-2002. ( WITH EXTENSION ROD,EXTENSION SOCKET AND WITHOUT SNOUT SWITCH CAPPED MK-2NOTE.:SPECIAL INSTRUCTION FOR PROOF IS ENCLOSED C Nonestab
13) SWITCH NO 6 EMPTY ASSY OF 8 COMPO Lf 9911358008[99]() Specification : SWITCH NO.6 EMPTY ASSEMBLY OF 8 COMPONANTSDRG.NO.D.D(L)- 15270 D.C.NO.36836-A DT.14-6-02 EXCEPT SUB ASSEMBLY 2719.LIST OF 8 COMPONENT.(1) SAFETY PIN DESIG.REF.2718 DC NO.34267-A DT.13/11/87(2)STRIKER SPRING DESIG.REF.2735 DC No.34497-A dt C Nonestab
14) SLOTTED CHEESE HEADSCREW M 2.5*5 (9911357866)[99]() Specification : SLOTTED CHEESE HEADSCREW M 2.5*5 TO DRG.NO.TRD-1-2-2265. C Nonestab
15) SET OF CARRIER 4A L and CARRIER 5A L LF 9911358263[99]() Specification : SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIE C Nonestab
16) SPRING WASHER TO DRG NO TRD 1 22267 LF 9911357852[99]() Specification : SPRING WASHER TO DRG.NO.TRD-1-2-2267. C Nonestab
17) TAIL UNIT ASY 5216051 FOR HEAT-551 (9911357820)[99]() Specification : TAIL ASSEMBLY TO DRG. NO.5216051. C Nonestab
18) BANGALORE TORPEDO SECT 38MM 2M EMPT 6430200100[64]() Specification : BANGALORE TORPEDO,SECTIONAL 38 mm 2m EMPTY MK 2/L TO DRG.PTNO. TX-10 GE DC(I)-33719-A DT 6/2/85 SPECN-IA-1231(g) DC(I)-35128-A DT 4/7/91 C Nonestab
19) SAFETY LOCK ASSY 042 512 CB LF 9911356455[99]() Specification : SAFETY LOCK ASSEMBLY TO DRG NO.bw6-042-512-C6 DCNO -34241-A DT 24/9/87. C Nonestab
20) ADOPTER BUSH TO DRG NO 4 26941 007 Lf 9911358269[99]() Specification : ADOPTER BUSH TO DRG NO.4-26941-007 DC NO.35878-A DTD. 20.12.94 C Nonestab
21) BODY ASSY-4-26941-060 FOR(81MM SMK) (9911355970)[99]() Specification : BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87. C Nonestab
22) SET OF14 ITEMS WITH PERFORATED DISC (9911356669)[99]() Specification : SET OF 14 COMPONENTS ( 81 MM SMOKE GRENADE EMPTY COMPONENTS)WITH DISC PERFORATED & DELAY ELEMENT(DETAILS AS PER ENCLOSEDLIST.)LOT SIZE - 2050 SET C Nonestab
23) LATCH UNIT FOR 125 MM PLY WOOD BOX (1755011144)[17]() Specification : LATCH UNIT FOR PLY WOOD BOX OF 125 MM FSAPDS (IMI) TO DRG. NO.TRD 221970a, 221971a, 221968a, 121961a, 121962a &121963a. R Nonestab
24) SHELL EMPTY APT 30MM BMP II lf 9911350550[99]() Specification : BODY WITH BAND ASSY TO DRG NO.bW 5.500.113 Cb/c DC NO - 34183-A DT.28-7-87. SPECN: PROGRAMME AND TEST PROCEDUREAS PER SHEET NO.bW 5.500.113 M/C (9 SHEETS)DC-34183-ADATED 28-07-87 C Nonestab
25) MOULDING OF PRIMER BODY and CONTACT LF 9911349627[99]() Specification : MOULDING OF PRIMER BODY TO DRG NO.NAD-1589/1/1 R.NO. NIL DT.24-7-07. CONTACT BOLT TO DRG. NO. ERDL DRG.971 DET.NO.3 DT.19-04-10 WITH GLASS FILLED PHENOLIC RESIN TO SPECN: JSS-9330-05:2012(REVISION NO-1) DC NO.5091-ME DT 21/8/2012 AS ERDLD R Nonestab
Category : p
Grade : Grade III
Size : S
1Ammunition Factory Khadki

Name Specification Use Status
1) CHAFF PAY LOAD FOR SRCR[61]() Specification : AS PER THE TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT OF KAVACH ROCKET AND CHAFF PAY LOAD -AI/4141 DT.5.5.10 C Nonestab
2) CHAFF PAY LOAD FOR MRCR[61]() Specification : TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT KAVACH ROCKET AND CHAFF PAY LOAD-AI/4141 DT.5.5.10 C Nonestab
3) CHAFF PAY LOAD FOR LRCR[61]() Specification : TECHNICAL SPECIFICATION ANNEXURE "A" AND ACCEPTANCE CRITERIA FOR OT LOT OF KAVACH ROCKET AND CHAFF PAY LOAD-AI/4141 DT.5.5.10 C Nonestab
Category :
Grade : Grade III
Size : S
1Ordnance Factory Muradnagar

Name Specification Use Status
1) CLAMP TO DRG. NO. 172.55.025[61]() Specification : AS PER OFM SPECIFICATION C Nonestab
Category : ddp
Grade : Grade III
Size : S
1Ordnance Factory Muradnagar

Name Specification Use Status
1) RING NUT 1000 LBS (6220900900)[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Nonestab
2) FILLING PLUG ( 450 KG)(6230400504)[62]() Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Nonestab
3) RING NUT 450 KG (6230900904)[60]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. DRG. ENCLOSED. C Nonestab
4) FILLING PLUG ( 250 KG) (6240000504)[62]() Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
5) FILLING PLUG FORGING 1000 LBS (2015995448)[20]() Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. C Nonestab
6) PLUG REAR (6250000501)[62]() Specification : PLUG REAR TO DRG.No. OFM/30858 [BASED ON ITV 52. [DRG.ENCLOSED] C Nonestab
7) Nose Plug 1000LBS(6220901044)[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARM - 1049B. [W/O SURFACE TREATED]. [DRG. ENCLOSED. C Nonestab
8) THRUSTER PLATE FORGING 1000 LBS (6220200120)[62]() Specification : FORGING FOR THRUSTER PLATE TO DRG. NO. OFM - 32615. C Nonestab
9) Nose Plug 250KG (6240900504)[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED). DRG. ENCLOSED C Nonestab
10) NOSE PLUG 450KG (6230900504)[62]() Specification : NOSE PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 7 [DRG. ENCLOSED]. [W/O SURFACE TREATED. C Nonestab
11) TA LINK MACHINED[61]() Specification : AS PER OFM SPECIFICATION C Nonestab
12) TA CLAMP MACHINED[99]() Specification : AS PER SPECIFICATION C Nonestab
13) TA WASHER T-90 (6120100106)[61]() Specification : TA WASHER TO DRG.NO.OFM-32839. C Nonestab
14) DETONATOR HOLDER 250 KG (6230901204)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE9501-01 DET-9 DRG. ENCLOSED C Nonestab
15) PLUG 450 KG (MCD) (6231101105)[62]() Specification : PLUG [MCD] [SURFACE TREATED] AS PER DRG. NO. ARDE 2122 DET 14. [DRG. ENCLOSED]. C Nonestab
16) TA BOLT M-20 (6120100107)[61]() Specification : TA BOLT M20 X 1.5 TO DRG NO.OFM-32840 DRG.ENCLOSED. C Nonestab
17) TA BOLT M-27 (6120100108)[61]() Specification : TA BOLT M27 X 1.5-6G TO DRG.NO.OFM-32841 [DRG.ENCLOSED. C Nonestab
18) CONTAINER EXPLODER 450 KG (6230701104)[62]() Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG. NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED] C Nonestab
19) LUG HOUSING 250 KG (6240100114)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
20) LUG HOUSING HOLDER 250 KG (6240100124)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
21) BASE TRANSIT FOR 1000LBS (6220901004)[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 C Nonestab
22) BASE TRANSIT (250KG) (6240900104)[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Nonestab
23) RING NUT 250 KG (6240900904)[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/ 9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
24) PLUG DUMMY 250 KG (6241101114)[62]() Specification : PLUG DUMMY (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5 SHT No 1 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
25) CONTAINER EXPLODER 250 KG (6244121304)[62]() Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO. ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB] C Nonestab
26) DETONATOR HOLDER 450 KG (6230901206)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY. C Nonestab
27) PLUG FASTENING 250 KG (6241101124)[62]() Specification : PLUG FASTENING (FOR LUG HOUSING) TO DRG. No. ARDE 9501-01 DET 5,SHT. No 2 (W/O SURFACE TREATED). [DRG. ENCLOSED] C Nonestab
28) DETONATOR HOLDER 1000 LBS (6220900700)[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED] C Nonestab
29) LUG HOUSING ASSEMBLY 450 KG ASSY M-C (6230100104)[62]() Specification : LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 W/O SURFACE TREATED. C Nonestab
30) CONTAINER EXPLODER 1000 LBS (6224121300)[62]() Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED] C Nonestab
31) PLUG A/C 34 1000 LBS (6220501010)[62]() Specification : PLUG A/C-34 TO DRG. NO. ARM 1172A16(MCD) ( WITH SURFACE TREATED/CAD.PLATED) C Nonestab
32) PLUG (MCD) 250KG (6240901205)[62]() Specification : PLUG TO DRG.NO. ARDE 9501-01 DET. 11 [CAD PLATED] DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
33) BASE TRANSIT FOR 450 KG (6230901004)[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
Category : ddp
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) FRONT WASHER AS PER DRG NO K 2072 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 2072 C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) GUIDE ROD FRONT RECOIL SPRING AS PER DRG No K 2031 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 2031 C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SUPPLY OF PIN FIXING TRUNNION AS PER DRG NO K 4008 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 4008 C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) SUPPLY OF REAR SIGHT ELEVATING SLIDE CATCH AS PER DRG NO K 2023 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO. K 2023 C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) CLEANING ROD EXTENSION AS PER DRG No K 9002 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG No K 9002 WITH FIRMS MATERIAL C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) IC TO DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505)[70]() Specification : AS PER IC TO DRG.NO.TEND 255E FOR LOCATING PIECE (ICR-1505) C Nonestab
Category : p
Grade : Grade III
Size : SS
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) FIRING PIN WITHOUT CHROME FLASH AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE[70]() Specification : AS PER DRG No TEND 2571 FOR TRICHY ASSUALT RIFLE C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) STUD AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE[70]() Specification : AS PER DRG NO TEND 2572 WITHOUT HEAT TREATMENT AND PHOSPHATING FOR TRICHY ASSAULT RIFLE C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Tiruchirapalli

Name Specification Use Status
1) REAR WASHER AS PER DRG NO K 2073 WITH FIRMS MATERIAL[70]() Specification : AS PER DRG NO K 2073 C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Varangaon

Name Specification Use Status
1) LINK CARTG. METALLIC BELT 7.62MM M13[60]() Specification : TO DRG. NO. F-7268389, DC NO. 36977-A DTD. 24-08-2004 & TO SPECN. :- (I) CIA 4204(b) DC NO. 36977-A DTD. 24-08-2004 (II) JSS : 0465-01-1994 (REVISION NO. 1) NOTE :- MATERIAL TO BE PACKED AS PER 85 A/L TO DRG. E Nonestab
Category : p
Grade : Grade I
Size : S
1Ordnance Factory Varangaon

Name Specification Use Status
1) CHARGER CLIP 7.62 mm AMMUNITION- B[60]() Specification : CIA-4205(d), DC No. 36247-A Dtd.26.02.1997 AS PER DRG. NO. CIA/AMMN/411/IQV/18A, DC(I) 35648-A DT. 12-01-1994. SPRING TO DRG. NO. IQV 61, DCI NO. 36790-A DT. 29-10-2001 & SPECN. IS : 2507-1975. CLIP TO DRG. IQV 62, DCI NO. 36790 DT. 29- E Nonestab
Category : p
Grade : Grade I
Size : S
1Heavy Vehicle Factory

Name Specification Use Status
1) MULTI PURPOSE SLINGING DEVICE CHPU B S TO DRG NO CQA HV 5 95 007[62]() Specification : MULTI PURPOSE SLINGING DEVICE(CHPU-B S) / CQA(HV)5.95.007 E Nonestab
2) WRENCH FOR TESTING STOPPER OF TRACK DRIVE SPROCKET HUB ASSY TO DRG NO 172 95 118CB[62]() Specification : WRENCH FOR TESTING STOPPER OF TRACK DRIVE SPROCKET HUB ASSY / 172.95.118CB E Nonestab
3) HOSE TO DRG NO 166 26 133CB A[62]() Specification : HOSE / 166.26.133CB-A E Nonestab
4) BUSH TO DRG NO 188 21 107[62]() Specification : BUSH / 188.21.107 E Nonestab
5) BOLT TO DRG NO 166 29 1303[62]() Specification : BOLT / 166.29.1303 E Nonestab
6) SUPPORTING SADDLE FOR STARTER GENERATOR TO DRG NO 172 70 001 7[62]() Specification : SUPPORTING SADDLE FOR STARTER GENERATOR / 172.70.001-7 E Nonestab
Category : p
Grade : Grade II
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001[00]() Specification : NUB TO CQA (AMMN) DRG.NO. 155-1050, DC 36792-A, DT. 01/11/2001 R Nonestab
2) MANUFACTURE AND SUPPLY OF PROOF SHOT 155MM 77B AS PER OFAJ DRG NO SM 959A SCOPE APPLICABLE TERMS AND CONDITIONS ARE AS PER ANNEXURE[00]() Specification : AS PER ANNEXURE C Nonestab
3) NOSE ADAPTER TO CQA[00]() Specification : as per Drawing C Nonestab
4) COPPER TUBE TO IS 2501 OR COPPER RING AS PER CQA DRG NO 4 024610 022[00]() Specification : as per Drawing C Nonestab
5) COPPER TUBE TO IS 2501 OR COPPER RING AS PER CQA DRG NO 4 024610 095[00]() Specification : as per drawing C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Ambajhari

Name Specification Use Status
1) JOINT BAND TO DRG NO CAT NO 1192A[00]() Specification : JOINT BAND TO DRG.NO.CAT.NO.1192A C Nonestab
2) JOINT BAND TO DRG NO CAT NO 1371A[00]() Specification : JOINT BAND TO DRG NO.CAT NO.1371A C Nonestab
3) ROLLERS LAUNCHING B B PLAIN CAT NO BB 22 TO DRG NO 5098 METRIC[00]() Specification : ROLLERS, LAUNCHING.B.B.PLAIN CAT.NO.BB-22 TO DRG NO.5098 (METRIC)/A. C Nonestab
Category : p
Grade : Grade III
Size : S
2543 AMI POLYMER PVT LTD
318 319 Mahesh Indl EstateOpp.Silver ParkMira-Bhayandar RoadMira Road EastDist. Thane Mira-Bhayandar Road Mira Road East Maharashtra
PIN1 : 401104
Phone No. : 0222855510
GSTIN : 26AAECA6387P1ZZ 		MUMA21404F

Download 		1Opto Electronic Factory

Name Specification Use Status
1) RING TO DRG. No. AF8685195 (LF-7432414017)[74]() Specification : AS PER DRAWING C Estab
2) GASKET TO DRG. No. BL8685376 (LF-7420114016)[74]() Specification : AS PER DRAWING C Estab
3) RING TO DRG NO AF8683898 LF 7420414003[74]() Specification : AS PER DRAWING C Estab
4) GASKET TO DRG NO AF8685889 LF 7432411029[74]() Specification : AS PER DRAWING C Estab
5) BUSHING TO DRG NO AF8220467 LF 7432414001[74]() Specification : AS PER DRAWING C Estab
6) BUSHING TO DRG NO AF8220575 LF 7432414008[74]() Specification : AS PER DRAWING C Estab
7) GASKET TO DRG NO AF8683997 LF 7432415001[74]() Specification : AS PER DRAWING C Estab
8) GASKET TO DRG NO BSH7840319 LF 7434015001[74]() Specification : AS PER DRAWING C Estab
9) GASKET TO DRG NO 70631000003 LF 7441120841[74]() Specification : AS PER DRAWING C Estab
10) RING TO DRG NO 70631000202 LF 7441121229[74]() Specification : AS PER DRAWING C Estab
11) SOFT COVER TO DRG NO BYU25014 LF 7445601232[74]() Specification : AS PER DRAWING C Estab
12) PACKING TO DRG NO BL7840287 LF 9001110696[90]() Specification : AS PER DRAWING C Estab
13) GASKET TO DRG NO BL7840300 LF 9001110700[90]() Specification : AS PER DRAWING C Estab
14) BUSH TO DRG NO AL8220083 LF 9002101045[90]() Specification : AS PER DRAWING C Estab
15) BLANKING PLUG TO DRG NO BSH7858162 LF 9004101067[74]() Specification : AS PER DRAWING C Estab
16) PROTECTOR TO DRG NO AU8687003 LF 9014101479[90]() Specification : AS PER DRAWING C Estab
Category : p
Grade : Grade II
Size : S
2544 Parmjeet Sandhu Engg. Works
B-88/5, Mayapuri, Indl. Area, Phase-1, New Delhi-110064 Mayapuri New Delhi Delhi
PIN1 : 110064
Phone No. : 41833510
GSTIN : 07AAHPS8719F1ZC 		DELB07275C

Download 		1Ordnance Factory Muradnagar

Name Specification Use Status
1) RING NUT 1000 LBS (6220900900)[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Estab
2) FILLING PLUG ( 450 KG)(6230400504)[62]() Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Estab
3) RING NUT 450 KG (6230900904)[60]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. DRG. ENCLOSED. C Estab
4) FILLING PLUG ( 250 KG) (6240000504)[62]() Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Estab
5) FILLING PLUG FORGING 1000 LBS (2015995448)[20]() Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. C Estab
6) DETONATOR HOLDER 250 KG (6230901204)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE9501-01 DET-9 DRG. ENCLOSED C Nonestab
7) CONTAINER EXPLODER 450 KG (6230701104)[62]() Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG. NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED] C Nonestab
8) LUG HOUSING HOLDER 250 KG (6240100124)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
9) BASE TRANSIT FOR 1000LBS (6220901004)[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 C Nonestab
10) BASE TRANSIT (250KG) (6240900104)[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Estab
11) RING NUT 250 KG (6240900904)[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/ 9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Nonestab
12) CONTAINER EXPLODER 250 KG (6244121304)[62]() Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO. ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB] C Estab
13) DETONATOR HOLDER 450 KG (6230901206)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY. C Nonestab
14) DETONATOR HOLDER 1000 LBS (6220900700)[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED] C Estab
15) LUG HOUSING ASSEMBLY 450 KG ASSY M-C (6230100104)[62]() Specification : LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 W/O SURFACE TREATED. C Nonestab
16) CONTAINER EXPLODER 1000 LBS (6224121300)[62]() Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED] C Nonestab
17) BASE TRANSIT FOR 450 KG (6230901004)[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
Category : ddp
Grade : Grade II
Size : S
1Ordnance Factory Muradnagar

Name Specification Use Status
1) RING NUT 1000 LBS (6220900900)[62]() Specification : RING NUT AS PER DRG. NO. ARM-1172B4 (MCD) W/O SURFACE TREATMENT. [DRG. ENCLOSED]. C Estab
2) FILLING PLUG ( 450 KG)(6230400504)[62]() Specification : FILLING PLUG [MCD] TO DRG. NO. ARDE 2122 DET NO. 10. [DRG. ENCLOSED]. [W/O SURFACE TREATED]. C Estab
3) RING NUT 450 KG (6230900904)[60]() Specification : RING NUT [MCD] TO DRG. NO. ARDE 2122 DET NO. 9. DRG. ENCLOSED. C Estab
4) FILLING PLUG ( 250 KG) (6240000504)[62]() Specification : FILLING PLUG [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET - 7. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Estab
5) FILLING PLUG FORGING 1000 LBS (2015995448)[20]() Specification : FILLING PLUG FORGING TO DRG. NO. OFM/32788. C Estab
6) DETONATOR HOLDER 250 KG (6230901204)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE9501-01 DET-9 DRG. ENCLOSED C Nonestab
7) CONTAINER EXPLODER 450 KG (6230701104)[62]() Specification : CONTAINER EXPLODER [MCD] [WITHOUT SURFACE TREATED] TO DRG. NO. ARDE - 2122 - DET -11. [DRG. ENCLOSED] C Nonestab
8) LUG HOUSING HOLDER 250 KG (6240100124)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Nonestab
9) BASE TRANSIT FOR 1000LBS (6220901004)[62]() Specification : BASE TRANSIT [MCD] TO DRG. NO. ARM-1172C20 C Nonestab
10) BASE TRANSIT (250KG) (6240900104)[62]() Specification : BASE TRANSIT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/9501 -01 DET -13. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB C Estab
11) RING NUT 250 KG (6240900904)[62]() Specification : RING NUT [MCD] [W/O SURFACE TREATMENT] AS PER DRG. NO. ARDE/ 9501 -01 DET - 6. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB. C Estab
12) CONTAINER EXPLODER 250 KG (6244121304)[62]() Specification : CONTAINER EXPLODER [W/O SURFACE TREATED] AS PER DRG. NO. ARDE/9501 - 01 DET - 8. [DRG. ENCLOSED] FOR 250 KG HSLD BOMB] C Estab
13) DETONATOR HOLDER 450 KG (6230901206)[62]() Specification : DETONETOR HOLDER( MCD )(WITHOUT SURFACE TREATED) TO DRG. NO. ARDE 2122 DET-12 FOR 450 KG HSLD BOMB BODY. C Nonestab
14) DETONATOR HOLDER 1000 LBS (6220900700)[62]() Specification : DETONATOR HOLDER TO DRG. No. ARM 1172B14 (WITH OUT SURFACE TREATMENT) [DRG. ENCLOSED] C Estab
15) LUG HOUSING ASSEMBLY 450 KG ASSY M-C (6230100104)[62]() Specification : LUG HOUSING ASSY. {MCD.}AS PER DRG.No. ARDE-2122 DET-4 W/O SURFACE TREATED. C Nonestab
16) CONTAINER EXPLODER 1000 LBS (6224121300)[62]() Specification : CONTAINER EXPLODER TO DRG. No. ARM 1172C6 (WITH OUT SURFACE TREATMENT [DRG. ENCLOSED] C Nonestab
17) BASE TRANSIT FOR 450 KG (6230901004)[62]() Specification : BASE TRANSIT (MCD.)AS PER DRG. No.ARDE-2122 DET-16 [W/O SURFACE TREATED] [DRG. ENCLOSED] C Nonestab
18) LUG HOUSING 250 KG (6240100114)[62]() Specification : LUG HOUSING HOLDER TO DRG. No.ARDE-9501-01DET 4 SHT No. 2 WITHOUT PHOSPHATED . [DRG. ENCLOSED] C Estab
19) Nose Plug 250KG (6240900504)[62]() Specification : NOSE PLUG TO DRG. No. ARDE 9501-01 DET 14 (W/O PHOSPHATED). DRG. ENCLOSED C Estab
Category : ddp
Grade : Grade II
Size : S
2545 SUPREME NONWOVEN INDUSTRIES PVT LTD
SUPREME HOUSE, PLOT NO 110 16TH ROAD , CHEMBUR MUMBAI Maharashtra
PIN1 : 400071
Phone No. : 25208822
GSTIN : 24AAACB1673P1ZJ 		MUMB12262F

Download 		1Ordnance Equipment Factory

Name Specification Use Status
1) WADDING POLYESTER HOLLOW SILCONIZED 350 GSM IN 91 CM[21]() Specification : AS PER APPENDIX "A" ATTACHED TO PROV. SPECN. S/6252/A/TC-6 R Nonestab
Category : p
Grade : Grade I
Size : L
1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) THERMAL BONDED BATTING POLYESTER 100 GSM 150 CM WIDTH[21]() Specification : AS PER APPENDIX 'B" OF PROV. SPECIFICATION NO. IND/TC/4587(d) AS PER RELEVANT CLAUSE OF SPECIFICATION AS PER CQA(T&C) KANPUR QAI NO.CQA (T&C)/QAI/99 TC-11 R Nonestab
Category : p
Grade : Grade II
Size : L
2546 DVS TECHNOSOFT PRIVATE LIMITED
3RD FLOOR DAMODHAR HIEGHT NEAR KALEWADI PHATA THERGAON PUNE NEAR KALEWADI PHATA PUNE Maharashtra
PIN1 : 411033
Phone No. : 0202727168
GSTIN : 27AACCD5788K1Z3 		PNED05581C

Download 		1Machine Tool Proto Type Factory

Name Specification Use Status
1) Supply of PLC, IPC, Sensors, Field I/OS for Machine Automation of 5.56mm Caliber Case Gauging Machine to Part List No.:MTSK-207-9000 FOR PART No. 41 TO 43 by Integration, Interfacing, Programming and Proving the System to Machine Requirement on WJ[00]() Specification : Supply of PLC, IPC, Sensors, Field I/OS for Machine Automation of 5.56mm Caliber Case Gauging Machine to Part List No.:MTSK-207-9000 FOR PART No. 41 TO 43 by Integration, Interfacing, Programming and Proving the System to Machine Requirem C Nonestab
Category : ddp
Grade : Grade II
Size : S
2547 APEE ENGINEERS
JALAN INDUSTRIAL COMPLEX Jangalpur, P.O. Domjur, Dist. Howrah-711411 West Bengal GateNo. 1, Gali No.1, Bipranna, HOWRAH West Bengal
PIN1 : 711411
Phone No. : 24238478 		ABFFA0431K

Download 		1Rifle Factory Ishapur

Name Specification Use Status
1) PRE-MACHINED BARREL BLANK FOR PISTOL AUTO 9MM 1A [70]() Specification : PRE-MACHINED BARREL BLANK TO RFI SK NO. 6409/A* ( DC/RFI/NO.02/01/09)(TP TO BE TESTED TO CONFIRM MECH.PROP.AT T-1 COND)MACROETCH TEST, NMIR TEST TO JSS:9510-06 & INCLUSION CONTENTTO IS:4163 AS PER CQA(SA) NOTE SHEET NO.1 COL.(A) OR (B) OF C Nonestab
2) SPRING PLATFORM FOR 5.56 INSAS RIFLE[70]() Specification : SPRING PLATFORM TO DS CAT NO.5360-007117 ( DC-26521-SA ) F0R RIFLE 5.56MM INSAS. C Nonestab
3) BODY (FINISH) FOR PISTOL AUTO 9MM 1A [70]() Specification : BODY TO DS CAT NO 1005-003145 (DC-26821-SA). MACRO-ETCH TEST ASTME 381-1984 WILL BE AS PER(C) OF SL.NO.1 OF CQA(SA)NOTE SHT.NO.1, & NMIR TEST TO IS:4163 WILL BE AS PER COL.(C) OF SL.NO.3 OF CQA(SA) NOTE SHT.NO.1 FOR PISTOL 9MM 1A. C Nonestab
4) MAGAZINE COVER PIPE FOR 12 BORE MODIFIED PUMP ACTION GUN [70]() Specification : MAGAZINE COVER PIPE FOR 12 BORE MODIFIED PUMP ACTION GUN, RFI DRG.NO. PAG-0009 C Nonestab
5) MAGAZINE TUBE WITH PLUG FOR 12 BORE PUMP ACTION GUN [70]() Specification : MAGAZINE TUBE WITH PLUG (RFI SK 9609) FOR 12 BORE PAG C Nonestab
6) EXTRACTOR FOR PISTOL AUTO 9MM 1A.[70]() Specification : EXTRACTOR TO DS CAT NO.5120-007879(LT.DC-26820-SADT.26.04.16(MACRO ETCH TEST TO ASTME 381-1984 WILL BE AS PER COL.(C) OFSL.NO.1 OF CQA(SA) NOTE SHEET NO.1.)& (NMIR TEST TO IS:4163 WILL BE AS PER COL.(C)OF SL.NO.3 OF CQA(SA) NOTE SHEET NO. C Nonestab
7) SLING ASSY FOR RIFLE 5.56MM INSAS.[70]() Specification : SLING ASSY.(BLACK COL.)TO DRG.NO.CQA(SA)SK-1000(DC-26480-SA)CONSIST.OF:- 1)CQA(SA)SK-1001(DC-26484-SA), 2)CQA(SA)SK-1002(DC-26480-SA), 3)1005-007992, 4)1005-007994, 5)1005-008031, 6)1005-008032, 7)1005-008030, 8)1005-008029, 9)5360-007800 C Nonestab
8) BLANK FOR BARREL EXTENSION (UPTO OPERATION STAGE-V) OF RIFLE 5.56MM.INSAS.[70]() Specification : BLANK FOR BARREL EXTENSION(UPTO OPERATION STAGE-V)TO RFI SK.NO. 6379*6-S. FOR RIFLE 5.56MM.INSAS. (MATERIAL WILL BE PROVIDED BY RIFLE FACTORY, ISHAPORE) C Nonestab
9) HAMMER MK-2 FOR PISTOL AUTO 9MM 1A.[70]() Specification : HAMMER,MK-2 TO DS CAT NO.1005-003160(LT.DC-26820-SA ) MACRO-ETCH TEST TO ASTME-381:1984 AS PER COL.'C' OF CQA(SA) NOTE SHEET NO.1 & NMIR TEST AS PER COL.'C'AGAINST SL.NO.3 OFCQA(SA) NOTE SHEET NO.1 C Nonestab
10) BLOCK REAR BLANK (MODIFIED) RIFLE 5.56MM INSAS FOLDING BUTT (STEEL).[70]() Specification : BLOCK REAR BLANK (MODIFIED) RIFLE 5.56MM INSAS FOLDING BUTT (STEEL). C Nonestab
11) PISTON EXTENSION (UPTO STAGE-VII) FOR RIFLE 5.56MM INSAS.[70]() Specification : PISTON EXTENSION UPTO STAGE VII AS PER RFI SK NO.6943*3-S WITH FIRM'S MATERIAL. FOR RIFLE 5.56 MM INSAS. C Nonestab
12) TUBE LOWER FOR RIFLE 5.56MM INSAS FOLDABLE BUTT (STEEL)[70]() Specification : TUBE LOWER TO DRG.NO.ARDE SK 2975/11. FOR RIFLE 5.56MM INSAS FOLDABLE BUTT(STEEL).[AL.ALLOY TO IS:738-243451'W'(HT15-OLD DESIG)WITH PROTECTIVE FINISH ANODISED TO COLOUR BLACK]. C Nonestab
13) FLASH ELIMINATOR FOR RIFLE 5.56MM LMG (TO BE USED IN RIFLE 5.56MM EXCALIBUR)[70]() Specification : FLASH ELIMINATOR FOR 5.56MM LMG TO DS CAT NO.1005-007962 (ARDE SK NO 2689/224) (TO BE USED IN RIFLE 5.56 MM EXCALIBUR) C Nonestab
14) LOCKING PIECE FOR PISTOL AUTO 9MM 1A.[70]() Specification : BS:970 PT.I:1983 GR.665 M17 OR IS:4432 : 1988 DESIGNATION 20Ni 7Mo 2. C Nonestab
15) BLADE FORE SIGHT FOR PISTOL AUTO 9MM 1A.[70]() Specification : AMENDED C Nonestab
16) BODY FOR 0.22" SPORTING RIFLE [70]() Specification : BS 970 EN 19A (T-CONDITION) WITH NON METALLIC INCLUSION RATING TEST C Nonestab
17) CATCH MAGAZINE (FINISH) FOR PISTOL AUTO 9MM 1A.[70]() Specification : BS:970 M40 IS:3748-1990 DESIGNATION 75. T-6 C Nonestab
18) SEAR FOR PISTOL AUTO 9MM 1A.[70]() Specification : IS:3748 : 1990 DESIGNATION 75 T-6 C Nonestab
19) SEMI FINISH BLANK OF HAMMER FOR RIFLE 5.56MM INSAS.[70]() Specification : MATERIAL BS 970 PT I:1983-655 M-13 En-36B C Nonestab
20) SEMI FINISHED DOVETAIL FOR RIFLE 5.56MM INSAS. [79]() Specification : SEMI FINISHED DOVETAIL FOR RIFLE 5.56MM INSAS.AS PER RFI SK.NO.6448*2 (EXCEPT HEAT TREATMENT AND PHOSPHATING). C Nonestab
21) BLANK FOR SEAR SAFETY FOR RIFLE 5.56MM INSAS.[79]() Specification : BLANK FOR SEAR SAFETY AS PER RFI SK. NO. 5076*10FOR RIFLE 5.56MM INSAS.(WITH FIRMS MATL.) C Nonestab
22) REGULATOR GAS FOR RIFLE 5.56MM INSAS [70]() Specification : REGULATOR GAS. TO D S CAT NO.1005-007746 (DC-26518-SA)FOR RIFLE 5.56MM.INSAS.(TP TO CONFORM 300-350 HV AFTER H & T.MACRO ETCH TEST AS PERASTME 381-84 WITH ACCEPTANCE STD.C2,R2,S2 FOR PLATE -I & NILFOR PLATE II). C Nonestab
23) GUARD TRIGGER FOR RIFLE 5.56MM INSAS.[79]() Specification : GUARD TRIGGER TO DS CAT.NO.1005-007862 (DC-26518-SA)FOR RIFLE 5.56MM INSAS. C Nonestab
24) TRIGGER (FINISH) FOR 0.32" PISTOL [70]() Specification : TRIGGER FINISH TO DRG NO.PS32-112(FROM TRADE FINISH).FOR 0.32" PISTOL C Nonestab
25) BREECH SLIDE LOCK FOR 12 BORE PUMP ACTION GUN[70]() Specification : DRG NO.- PAG-0027 C Nonestab
Category : p
Grade : Grade I
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) SUPPORTING BRACKET ASSY, TO DRG, NO-F 1303-029151 A D.C. NO. 19219-W DT,13.5.11 IN FINISHED CONDITION[71]() Specification : SUPPORTING BRACKET ASSY, TO DRG, NO-F 1303-029151 A D.C. NO. 19219-W DT,13.5.11 IN FINISHED CONDITION C Nonestab
Category : p
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) RECEIVER TO DRG, NO. CTM-0108/1 TO CTM-0108/6[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) HAMMER TO DRG. NO. CTM-0110/1 TO CTM-0110/6 FOR MODIFIED PISTOL[70]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) HOUSING LEVER SEAR TO DRG.NO.M-8201b(PB-8) FOR 0.32 PISTOL[70]() Specification : DRG.NO.M-8201A(PB-8) FOR 0.32 " PISTOL C Nonestab
Category : p
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) REAR SIGHT BASE TO DRG. NO 301141575 (F1303-028081 D)[71]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size : S
1Gun and Shell Factory

Name Specification Use Status
1) CAM PLATE FIRING ROD TO DRG. IRCL 593 (GF 215143)[71]() Specification : AS PER DRAWING C Nonestab
Category : p
Grade : Grade III
Size : S
2548 LSR FORGE PVT. LTD (UNIT-II)
SUA ROAD, KANGANWAL SUA ROAD LUDHIANA Punjab
PIN1 : 141017
Phone No. : 9914925456
GSTIN : 03AAACL8129L1ZG 		JLDL00403E

Download 		1Rifle Factory Ishapur

Name Specification Use Status
1) FORGING OF SLIDE FOR PISTOL AUTO 9MM 1A.[70]() Specification : FORGING OF SLIDE AS PER RFI SK.NO.3211/A FOR PISTOL AUTO 9MM 1A. C Nonestab
Category : p
Grade : Grade II
Size : M
1Small Arms Factory

Name Specification Use Status
1) St. Forging Plate Bottom to DRG No. SKM-283*2[01]() Specification : St. Forging Plate Bottom to DRG No. SKM-283*2 C Nonestab
Category : p
Grade : Grade II
Size : M
2549 Navratna Industries
M-26, MIDC Hingna Industrial Area Hingna Road Nagpur Maharashtra
PIN1 : 440016
Phone No. : 645788
GSTIN : 27ABJPS4593G1Z4 		NGPN00523F

Download 		1Ordnance Factory Bhandara

Name Specification Use Status
1) SPECIAL CASSETTE CONTAINER[42]() Specification : SPECIAL CASSETTE CONTAINER FOR SPECIAL ERA PANEL. SPEC. HEMRL/MED/PS/289. MATERIAL GALVANISED STEEL SHEET TO SPEC. NO. IS 277-92. HERML DRG. NO. 1460 DETL.8 R Nonestab
Category : p
Grade : Grade I
Size : S
1Ordnance Factory Bhandara

Name Specification Use Status
1) M S PLATE SZ 3 MM PHOSPATED[42]() Specification : MS PLATE OF SIZE 126 + 1.0-0.0 X 126 + 1.0-0.0X 3MM THICK (PHOSPATED) TO SPEC IS : 2062-1994 OF ANY GRADE, CORNER RADIUS 3R. ALL SHARP CORNERS TO BE REMOVED. TESTING TO BE DONE FOR TENSILE & ELONGATION. HEMRL DRG NO 1517- DETL NO. 3 R Nonestab
Category : p
Grade : Grade I
Size : S
1Ordnance Factory Bhandara

Name Specification Use Status
1) STD CASSETTE CONTAINER[42]() Specification : STD. CASSETTE CONTAINER FOR STD. ERA PANELS& TAPERED ERA PANELS, SPEC. HEMRL/MED/PS/288 (MATERIAL STEEL SHEET TO SPEC. HEMRL/MED/PS/288. MATERIAL GALVANISED STEEL SHEET TO SPEC. NO. IS : 277-92. HEMRL DRG. NO. 1457 DETL.8 R Nonestab
Category : p
Grade : Grade I
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6432300002 CASETTE CONTAINER SPCL ERA PANEL[64]() Specification : HEMRL/MED/PS/289 (MATERIAL: GALVANIZED STEEL SHEET TO SPECN. NO.IS:277-92) HEMRL R Nonestab
2) 6432300008 MS PLATE 3MM TH PHOS ERA[64]() Specification : IS:2062-1994 C Nonestab
3) 0133030114 MS PLATE SIZE 6MM[01]() Specification : IS 2062-1994 C Nonestab
4) 0133030109 MS PLATE SIZE 25MM[01]() Specification : IS 2062-1994 C Nonestab
5) 6432300001 STD CASATTE CONT FOR STD ERA PANEL[64]() Specification : IS:277-92) HEMRL C Nonestab
6) 6333501100 MS TARGET PLATE FOR PROOFING[63]() Specification : QAP NO. HEMRL /HE/ ADD/ 08/01 REV.00 OF 09/2008. C Nonestab
Category : p
Grade : Grade III
Size : S
1Ordnance Factory Chanda

Name Specification Use Status
1) 6331001200 M S TARGET PLATE FOR CHARGE 100 MM[63]() Specification : IS:2062 P Nonestab
Category : p
Grade : Grade III
Size : S
2550 GUNWANT ENGINEERING
35/36, MOUZA KAPSI KHURD, NEAR BHONSLE TALAV,NAGPUR BARADWARI NAGPUR Maharashtra
PIN1 : 440035
Phone No. : 270306
GSTIN : 27ACLPG1191M1ZB 		ACLPG1191M

Download 		1Ordnance Factory Bhandara

Name Specification Use Status
1) STD CASSETTE CONTAINER[42]() Specification : STD. CASSETTE CONTAINER FOR STD. ERA PANELS& TAPERED ERA PANELS, SPEC. HEMRL/MED/PS/288 (MATERIAL STEEL SHEET TO SPEC. HEMRL/MED/PS/288. MATERIAL GALVANISED STEEL SHEET TO SPEC. NO. IS : 277-92. HEMRL DRG. NO. 1457 DETL.8 R Nonestab
Category : p
Grade : Grade I
Size : S
1Ordnance Factory Bhandara

Name Specification Use Status
1) SPECIAL CASSETTE CONTAINER[42]() Specification : SPECIAL CASSETTE CONTAINER FOR SPECIAL ERA PANEL. SPEC. HEMRL/MED/PS/289. MATERIAL GALVANISED STEEL SHEET TO SPEC. NO. IS 277-92. HERML DRG. NO. 1460 DETL.8 R Nonestab
Category : p
Grade : Grade I
Size : S
1Ordnance Factory Bhandara

Name Specification Use Status
1) PZM Nozzle Casting Cum Machining Left & Right[20]() Specification : ERDL. DRG NO.1040 DET-1 & ERDL. DRG. NO. 1040 DET-2. R Nonestab
2) Aluminium Container(SER)[25]() Specification : Drg.No.OFBA/PETN/23 Dtd.15.01.1970 R Nonestab
3) Cylinder 12 A Steel for Ammunition , Container Assembly 117 A[14]() Specification : CYLINDER 12A STEEL FOR AMMUNITION, CONTAINER ASSEMBLY 117A. AS PER DRG.NO CIA/AMN/1833, PART NO ISV 453A.(SERVICEABLE)/ DRG.NO.OFBA/NR/423 TO 428. R Nonestab
4) Metallic Container For Charge 9[25]() Specification : Drg No.4085561 DC 35637 CQA AMMN OF Dtd17.02.93 LEAK TEST AS PER SPECN. IA-1169(N), DC-35707-A DT.05.5.94 R Nonestab
5) BOX C-26 A (SER)[65]() Specification : WOOD FOR PACKAGE AMMUNITION, 92 A PART NO. ISV-352A, DRG-CIA/AMMN 1773 DC-35922-A DTD. 23.02.95 & SPECN., IA-948 (a,f) DC-36081 A R Nonestab
6) CYLINDER 443 MK 1/L[65]() Specification : GALVANIZED STEEL SHEET TYPE DEEP DRAWING DESIGNATION B GPO TO SPECN. IS:277-2003. AS PER DRG. NO. OFBA/CX/51 DT.24.02.1989 & 05.01.2007 (FOR ITEM NO. 5 & 6) AMENDED ON DT.10.10.2008. TRACED FROM DRG.NO. DD (L) 16472 B AMENDED VIDE DC. NO. R Nonestab
7) METALLIC CONTAINER -M4A2 (SER)[25]() Specification : METALLIC CONTAINERS AS PER CQA(AMMN) KIRKEE DRG.NO-13979-0-0 DC 35707-A and LEAK TEST AS PER SPECN- IA 1169(n)DC-35707-A- 05.05.94. R Nonestab
Category : p
Grade : Grade I
Size : S
2551 Ghatge Patil Industries Limited
Uchgaon, Kolhapur, Maharashtra, 416005 Maharashtra Kolhapur Maharashtra
PIN1 : 416005
Phone No. : 2608108
GSTIN : 27AAACG6595R1ZP 		AAACG6595R

Download 		1Ammunition Factory Khadki

Name Specification Use Status
1) BODY AND CUP[6099990343]() Specification : 1) BODY (IGNITER FOR FOREMOTOR) DRG.NO.NAI(V) 8014/1 (PROV) DT. 26/08/09 - 1 NO. 2) CUP (IGNITER FOR FOREMOTOR) DRG. NO.NAI(V) 8014/2 ( PROV) DT. 4/9/01 - 1 NO. C Nonestab
Category :
Grade : Grade III
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) CUPS GILDING METAL FOR 9MM BALL MK2[60]() Specification : IS:2768-1982 R Nonestab
2) CUP FOR CARTG.CASE BALL 5.56 MM[60]() Specification : DRG NO. AFK/CUP-31A R Nonestab
Category :
Grade : Grade III
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) SRCR (EMPTY BODY)[60]() Specification : DRG NO. NASK 828/1.( PROV ) DT.27.7.2000 R Nonestab
2) MEDIUM RANGE CHAFF ROCKET (MRCR)[93]() Specification : DRG.NO.NASK 762 SHEET 1 OF 2 SHTS (PROV)DT.20.4.2015 . C Nonestab
Category :
Grade : Grade III
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) A S ROCKET RGB 60 EMPTY[60]() Specification : DRG. NO. NASK 1061 (PROV) C Nonestab
Category :
Grade : Grade III
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) COMPONENTS FOR CARTG. 40MM MGL AMN[60]() Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP C Nonestab
2) CASE FOR CARTRIDGE 38 MM RUBBER BULLET TO DRG. NO. KF/SK-1746 SHEET NO.2 SPECN. DGOF 135[60]() Specification : DGOF 135 (A)DT. 15-11-99. C Nonestab
Category :
Grade : Grade III
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) SLUG FOR 14.5MM CASE AFK/PJ/SK-56[60]() Specification : AFK, DRG NO.AFK/PJ/SK-56 C Nonestab
Category :
Grade : Grade III
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) CARTG TRAINING EMPTY ASSESMBLY FOR 120MM MORTAR BOMB TO DRG NO ARDE 1925 SHT NO 2 PT NO IRW 1GE WITH BASE CARTG 120MM CHARGE 3 TO DRG NO ARDE 2163 SHT NO 3 PT NO IRW 200 SPECN CQA A 2316[60]() Specification : CQA (A) 2316 C Nonestab
Category :
Grade : Grade III
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) LONG RANGE CHAFF ROCKETS (LRCR)[93]() Specification : DRG.NO.NASK 760 SHEET 1 OF 2 SHTS. (PROV) DT.20.04.2015. C Nonestab
Category :
Grade : Grade III
Size : L
1Ammunition Factory Khadki

Name Specification Use Status
1) CTD 81 MM MOR BOMB 3A EMPTY IRE 3GE[60]() Specification : CQA (A) 2348 C Nonestab
2) CARTG.TRG FOR 81MM MOR.BOMB3B(EMPTY[60]() Specification : CQA (A) 2348 C Nonestab
Category :
Grade : Grade III
Size : L
1Heavy Vehicle Factory

Name Specification Use Status
1) TURRET TRAVERSING MECHANISM ASSY WITHOUT MOTOR[62]() Specification : TURRET TRAVERSING MECHANISM ASSY WITHOUT MOTOR 176.23CB3CB E Nonestab
Category :
Grade : Grade III
Size : L
2552 Shree Engineering Works
Bhagirathi Niwas Samata Colony Samata Nagar Osmanabad Maharashtra
PIN1 : 413501
Phone No. : 222159 		ABJPP0794N

Download 		1Ordnance Factory Bhusawal

Name Specification Use Status
1) Handle with Handle Clip for Box C-53A[99]() Specification : DRG, NO.OFB/C/1564 E Nonestab
2) CARRYING LINK[99]() Specification : DRG.NO OFB/C/1540 E Nonestab
3) HANDLE AND HANDLE CLIP ASSEMBLY[99]() Specification : DRG, NO.OFB/C/1564 E Nonestab
4) HANDLE AS PER DRG. NO. OFB/C/1757[99]() Specification : AS PER O.F.BSL DRAWING/SPECIFICATION E Nonestab
Category : p
Grade : Grade III
Size : S
2553 VIBHUTI INDUSTRIES INDIA PRIVATE LIMITED
E-143, SECTOR 63, NOIDA, GAUTAM BUDH NAGAR E-143 NOIDA Uttar Pradesh
PIN1 : 201301
Phone No. : 9911000567
GSTIN : 09AAICV3071D1ZC 		AAICV3071D

Download 		1Opto Electronic Factory

Name Specification Use Status
1) SUPPORT TO DRG NO BG29032 FOR BG29-4S (LF 7445108203)[74]() Specification : SUPPORT TO DRG NO BG29032 FOR BG29-4S (LF 7445108203) C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) COVER AS PER DRG NO 71940300031 (LF 7440205937)[74]() Specification : COVER AS PER DRG NO 71940300031 (LF 7440205937) C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) HEAT SINK LF NO 7420112006[74]() Specification : HEAT SINK LF NO 7420112006 C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) SPACER III TO DRG NO OLF/R&D/BPK-2/224 (LF 7432111068)[74]() Specification : SPACER III TO DRG NO OLF/R&D/BPK-2/224 (LF 7432111068) C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) HOUSING TO DRG NO AF8020273 LF 7432412038[74]() Specification : HOUSING TO DRG NO AF8020273 (LF 7432412038) C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) PLATE LF NO 9014081474[90]() Specification : PLATE LF NO 9014081474 C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) CASING TO DRG NO BL8236108 LF 7440201954[74]() Specification : AS PER DRG. C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) SPACER FOR BLOCK D TO DRG NO IUMK713111007 (LF 7440200408)[74]() Specification : SPACER FOR BLOCK D TO DRG NO IUMK713111007 (LF 7440200408) C Nonestab
Category :
Grade : Grade III
Size : S
1Opto Electronic Factory

Name Specification Use Status
1) BODY LF NO 7440205827[74]() Specification : BODY LF NO 7440205827 C Nonestab
2) WASHER LF 7432413004[74]() Specification : WASHER LF 7432413004 C Nonestab
3) BODY LF 7432413007[74]() Specification : BODY LF 7432413007 C Nonestab
4) AXLE LF NO 7440205790[74]() Specification : AXLE LF NO 7440205790 C Nonestab
5) FLANGE DRG NO AL8231247 LF NO 7440206232[74]() Specification : FLANGE DRG NO AL8231247 LF NO 7440206232 C Nonestab
6) PIVOT DRG NO AL8216092 LF NO 7440201745[74]() Specification : PIVOT DRG NO AL8216092 LF NO 7440201745 C Nonestab
7) RINGBL8240390[90]() Specification : RING BL8240390 (9001080624) C Nonestab
8) LF 7440208408 FLANGE AS PER DRG AL6240091[74]() Specification : LF-7440208408 FLANGE, AL6.240.091 C Nonestab
9) LF 7440208511 BODY AS PER DRG AL6 110 306[74]() Specification : LF – 7440208511, BODY AS PER DRG No. -AL6.110.306 C Nonestab
10) LF 7440201457 PANEL FOR BV29 080 01[74]() Specification : PANEL FOR BV29.080-01 (LF 7440201457) C Nonestab
Category :
Grade : Grade III
Size : S
2554 UNIVERSAL CONSTRUCTION MACHINERY AND EQUIPMENT
GAT NO-327/328/329 A/P-SHIVARE TAL-BHOR MUMBAI BANGLORE HIGHWAY PUNE Maharashtra
PIN1 : 412205
Phone No. : 25230777
GSTIN : 27AAACU7808B1ZI 		PNEU05881B

Download 		1Ordnance Factory Khamaria

Name Specification Use Status
1) TAIL UNIT NO- TB 250 (9911358363)[99]() Specification : TAIL UNIT NO.TB-250,DRG.NO.ARDE-9501-03 DT.19 APR 2000.AND SPECN.NO.ARDE/SPECN./613 PROVISIONALLY APPROVED ON 19 APR2000 AND AMENDED VIDE RCMA(AA)/1440/5/TECH DATED 29 APR 2010.PACKAGE DESCRIPTION-BOX STEEL NO.1 MK-I TO HOLD 1 TO DRG.NO.A C Nonestab
2) TAIL UNIT NO-1111 FOR 1000 LBS (9911358361)[99]() Specification : TAIL UNIT NO.-1111 TO DRG.NO.ARDE-2139 DET.NO.1,2 SHTS,SHT NO.1,R NO.2 DATE 18-10-96 AND SHT NO.2 R NO.2 DT.02-12-2002AND SPECN.NO.ARDE/SPECN./459 PROVISIONALLY APPROVED ON 16JULY 1992.PACKAGE DESCRIPTION-CONTAINER FOR TU NO.1111 TODRG.NO C Nonestab
Category : p
Grade : Grade II
Size : M
2555 BALAJI DEFENCE ENGINEERING SOLUTIONS
SHED NO 1 TINGRE INDUSTRIAL ESTATE BHOSARI INDUSTRIAL ESTATE PUNE NASHIK HIGHWAY PUNE Maharashtra
PIN1 : 411039
Phone No. : 41207052
GSTIN : 27AAYFB9255C1Z0 		AAYFB9255C

Download 		1Gun Carriage Factory

Name Specification Use Status
1) 9081001765 BEAM TO PT NO 2028682[90]() Specification : BEAM TO PT.NO. 2028682. C Nonestab
2) 9081005847 COVER 3055481 TO ARTICLE NO 1153793[90]() Specification : COVER (3055481) TO ARTICLE NO.1153793. C Nonestab
3) 9081008323 COVER RIGHT TO PART NO1155741 DRG NO 3055932[90]() Specification : COVER RIGHT TO PART NO.1155741(DRG.NO.3055932). C Nonestab
4) 9081001582 ENGINE BONNET RIGHT FRONT ARTICLE NO 1168243 DRG NO 2028691[90]() Specification : ENGINE BONNET RIGHT FRONT ARTICLE NO. 1168243 (DRG.NO. 2028691). C Nonestab
5) 9081001583 ENGINE BONNET LEFT FRONT ARTICLE NO 1168244 DRG NO 2028689[90]() Specification : ENGINE BONNET LEFT FRONT ARTICLE NO. 1168244 (DRG.NO. 2028689). C Nonestab
6) 9081001584 ENGINE BONNET REAR ARTICLE NO 1168245 DRG NO2028690[90]() Specification : ENGINE BONNET REAR ARTICLE NO. 1168245 (DRG.NO.2028690). C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) 9081008366 EXHAUST HOSE COVER TO DRAWING NO GCF 50 41121[90]() Specification : 9081008366 EXHAUST HOSE COVER TO DRAWING NO GCF/50/41121 C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) STAY BOTTOM LEFT TO DRG NO 1015 000695[90]() Specification : STAY BOTTOM (LEFT) TO DRG. NO. 1015-000695 C Nonestab
2) STAY BOTTOM RIGHT TO DRG NO 1015 000706[90]() Specification : STAY (BOTTOM RIGHT) TO DRG. NO. 1015-000706 C Nonestab
3) BUSH ASSY 6083112[90]() Specification : BUSH ASSY 6083112 C Nonestab
4) 9081008305 WHEEL CHOCK TO DRG NO GCF 50 41092[90]() Specification : WHEEL CHOCK TO DRG. NO. GCF/50/41092 C Nonestab
5) REAR AXLE ASSEMBLY TO DRG NO 2011598 FOR 40 MM A AGUN L 70[90]() Specification : REAR AXLE ASSEMBLY TO DRG. NO. 2011598 FOR 40 MM A.A. GUN L/70 C Nonestab
6) 9070100092 FRONT AXLE ASSY IAN 39A[90]() Specification : 9070100092 FRONT AXLE ASSY. IAN 39A C Nonestab
7) 9081001765 BEAM TO PT NO 2028682[90]() Specification : BEAM TO PT.NO. 2028682. C Nonestab
8) 9080081315 BOX TO DRG N1ICM 320A DS CAT NO 8115002944[90]() Specification : 9080081315 BOX TO DRG N1ICM 320A DS CAT NO 8115002944 C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) 9081008427 HOT AIR STARTER AID FOR OM616 TO DRG NO AW2 23 1 411 0001[90]() Specification : HOT AIR STARTER AID FOR OM616 TO DRG. NO. AW2-23-1-411-0001. C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) TRAIL LOCKING BAR LEFT AND RIGHT TO PART NO 1147189 AS PER ANNEXURE NO DHANUSH 1147189 2017[90]() Specification : TRAIL LOCKING BAR LEFT & RIGHT TO PART NO. 1147189, AS PER ANNEXURE NO. DHANUSH/1147189/2017. C Nonestab
2) 9069112686 PLUG BLANKING DOUBLE IAN 280 SA[90]() Specification : 9069112686 PLUG BLANKING DOUBLE IAN 280 SA C Nonestab
3) 9081002978 BUFFER ASSY TO DRG 1133736 5163822[90]() Specification : BUFFER ASSY.TO DRG.1133736/5163822 C Nonestab
4) 9081002984 TOWING EYE TO DRG NO 3048547[90]() Specification : TOWING EYE TO DRG.NO.3048547 C Nonestab
5) BRACKET TO DRG NO BOF 6003000[90]() Specification : BRACKET TO DRG NO BOF 6003000 C Nonestab
6) BRACKET WELDING DRG ASSY DRG NO BOF 5078034[90]() Specification : BRACKET WELDING DRG ASSY DRG NO BOF 5078034 C Nonestab
7) BRACKET TO DRG NO BOF 6127316[90]() Specification : BRACKET TO DRG NO BOF 6127316 C Nonestab
8) 9081008305 WHEEL CHOCK TO DRG NO GCF 50 41092[90]() Specification : WHEEL CHOCK TO DRG. NO. GCF/50/41092 C Nonestab
9) REAR AXLE ASSEMBLY TO DRG NO 2011598 FOR 40 MM A AGUN L 70[90]() Specification : REAR AXLE ASSEMBLY TO DRG. NO. 2011598 FOR 40 MM A.A. GUN L/70 C Nonestab
10) 9070100092 FRONT AXLE ASSY IAN 39A[90]() Specification : 9070100092 FRONT AXLE ASSY. IAN 39A C Nonestab
11) 9069002037 CHAIN RAISING RIGHT TO DRG 4027315[90]() Specification : 9069002037 CHAIN RAISING RIGHT TO DRG.4027315 C Nonestab
12) 9069002043 CHAIN RAISING LEFT TO DRG 4028003[90]() Specification : 9069002043 CHAIN RAISING LEFT TO DRG.4028003 C Nonestab
13) 9081001426 GIRLLE ART NO 5182528[90]() Specification : GIRLLE ART,NO 5182528 C Nonestab
14) 9077301196 LEVER LOADING PENDULUM CAT PART NO 1147159[90]() Specification : LEVER(LOADING PENDULUM) CAT PART NO.-1147159 C Nonestab
15) 9077100218 EYE TAIL ASSY TO DRAWING NO IFL 526A ILG 2401 2A[90]() Specification : 9077100218 EYE TAIL ASSY TO DRAWING NO IFL 526A ILG 2401 2A C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) 9069045022 BATTERY BOXES[90]() Specification : 9069045022 BATTERY BOXES DRG NO 6150-000380 C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) BOX TO DRG NO N1 8115 002943[90]() Specification : BOX TO DRG NO. N1/8115-002943 C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) 9069112405 SHAFT ACTUATING LEVER TO DRAWING NO 5047139[90]() Specification : SHAFT ACTUATING LEVER TO DRAWING NO 5047139 C Nonestab
2) 9073001401 CLEANING ROD ASSY DS 1015004164 DRG NO 902 03 100CB[90]() Specification : 9073001401 CLEANING ROD ASSY DS 1015004164 DRG NO 902 03 100CB R Estab
Category : p
Grade : 3
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) SHOCK ABSORBER TO PART NO 6298889[90]() Specification : SHOCK ABSORBER TO PART NO.6298889 C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) TRAIL LOCKING BAR LEFT AND RIGHT TO PART NO 1147189 AS PER ANNEXURE NO DHANUSH 1147189 2017[90]() Specification : TRAIL LOCKING BAR LEFT & RIGHT TO PART NO. 1147189, AS PER ANNEXURE NO. DHANUSH/1147189/2017. C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) CHAIN TO DRG NO 4027314[90]() Specification : CHAIN TO DRG NO. 4027314 C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) RAMMERTO ART NO 1156267 EXCLUDING HYDRAULIC CYLINDER RAMMER UNIT[90]() Specification : AS PER TENDER DOCUMENT C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) BUSH TO DRG NO M2 BOF 6105892[90]() Specification : BUSH TO DRG. NO. M2/BOF-6105892 C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) BUSH TO DRG NO M2 BOF 6105892[90]() Specification : BUSH TO DRG NO M2 BOF 6105892 C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) 9081001814 LOADING TRAY TO ART NO 1145143[90]() Specification : LOADING TRAY TO ARTICLE NO. 1145143. C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) SHOCK ABSORBER TO DRG NO 1160278[90]() Specification : SHOCK ABSORBER TO DRAWING.NO.1160278 C Nonestab
2) 9081002978 BUFFER ASSY TO DRG 1133736 5163822[90]() Specification : BUFFER ASSY.TO DRG.1133736/5163822 C Nonestab
3) 9081002984 TOWING EYE TO DRG NO 3048547[90]() Specification : TOWING EYE TO DRG.NO.3048547 C Nonestab
4) BUSH ASSY 6083112[90]() Specification : BUSH ASSY 6083112 C Nonestab
5) 9081008366 EXHAUST HOSE COVER TO DRAWING NO GCF 50 41121[90]() Specification : 9081008366 EXHAUST HOSE COVER TO DRAWING NO GCF/50/41121 C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) BAR TOWING TO DRG. NO. IAN-41A[90]() Specification : BAR TOWING TO DRG. NO. IAN-41A C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) LOADING TRAY RESERVE PT. NO. 1154765[90]() Specification : AS PER TE NO. 160306FHPO C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) RAMMERTO ART NO 1156267 EXCLUDING HYDRAULIC CYLINDER RAMMER UNIT[90]() Specification : AS PER TENDER DOCUMENT C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) APPARATUS PUII BACK DRG NO 1168377D[90]() Specification : APPARATUS PULL-BACK TO DRG.NO.1168377D C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) LOADING TRAY RESERVE PT. NO. 1154765[90]() Specification : AS PER TE NO. 160306FHPO C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) LOCK TRAVERSING(FOR BODY) TO DRG. NO. IAN-155-SA[90]() Specification : LOCK TRAVERSING(FOR BODY) TO DRG. NO. IAN-155-SA C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) RAMMERTO ART NO 1156267 EXCLUDING HYDRAULIC CYLINDER RAMMER UNIT[90]() Specification : AS PER TENDER DOCUMENT C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) 9081005193 KIT MODIFIED LOADING TROUGH AS PER DRG NO PI IPA 0040[90]() Specification : KIT MODIFIED LOADING TROUGH AS PER DRG NO.PI/IPA-0040. C Nonestab
Category :
Grade : Grade III
Size : SS
1Gun Carriage Factory

Name Specification Use Status
1) 9069111404 LIGHT REAR SYSTEM 40 MM AA L70 GUN TO CAT NO M2 1010 002684 DRG NO CIL 3428[90]() Specification : 9069111404 LIGHT REAR SYSTEM 40 MM AA L70 GUN TO CAT NO M2 1010 002684 DRG NO CIL 3428 C Nonestab
2) 9069113035 DRUM BOF 3017879[90]() Specification : 9069113035 DRUM BOF 3017879 C Nonestab
Category :
Grade : Grade III
Size : SS
2556 DURATUF GLASS INDUSTRIES
25, Paschim Vihar Extension, Near Metro Pillar No - 195, , Rohtak Road New Delhi (INDIA) Delhi
PIN1 : 110063
Phone No. : 25214544
GSTIN : 06AAACG0381P1ZH 		DELG03177G

Download 		1Vehicle Factory Jabalpur

Name Specification Use Status
1) WIND SHIELD GLASS (ARMY) MPV[90]() Specification : WIND SHIELD GLASS (ARMY) MPV (645-10-1011-(I) (WITH RUBBER BEADING) C Nonestab
2) DRIVER SIDE GLASS[90]() Specification : DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1012-(I) C Nonestab
3) CO-DRIVER SIDE GLASS[90]() Specification : CO-DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1013-(I) C Nonestab
4) SIDE GLASS[90]() Specification : SIDE GLASS GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1014-(I) C Nonestab
5) REAR GLASS (ARMY) MPV[90]() Specification : REAR GLASS (WITH RUBBER BEADING) (ARMY) MPV 645-10-1015(I) C Nonestab
Category : p
Grade : Grade I
Size : SS
1Vehicle Factory Jabalpur

Name Specification Use Status
1) WIND SHIELD GLASS (ARMY) MPV[90]() Specification : WIND SHIELD GLASS (ARMY) MPV (645-10-1011-(I) (WITH RUBBER BEADING) C Estab
2) DRIVER SIDE GLASS[90]() Specification : DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1012-(I) C Estab
3) CO-DRIVER SIDE GLASS[90]() Specification : CO-DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1013-(I) C Estab
4) SIDE GLASS[90]() Specification : SIDE GLASS GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1014-(I) C Estab
5) REAR GLASS (ARMY) MPV[90]() Specification : REAR GLASS (WITH RUBBER BEADING) (ARMY) MPV 645-10-1015(I) C Estab
6) SIDE GLASS TROOPER ARMY VER FOR UPGRADED MPV 4x4 LF NO 9010398096000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
7) WIND SHIELD GLASS FOR UPGRADED MPV 4x4 LF NO 9010398104000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
8) REAR GLASS FOR UPGRADED MPV 4x4 LF NO 9010398103000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
9) DRIVER SIDE GLASS ARMY VER FOR UPGRADED MPV 4x4 LF NO 9010398098000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
10) CO DRIVER SIDE GLASS ARMY VER FOR UPGRADED MPV 4x4 LF NO 9010398097000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
Category : p
Grade : Grade I
Size : SS
1Vehicle Factory Jabalpur

Name Specification Use Status
1) WIND SHIELD GLASS (ARMY) MPV[90]() Specification : WIND SHIELD GLASS (ARMY) MPV (645-10-1011-(I) (WITH RUBBER BEADING) C Estab
2) DRIVER SIDE GLASS[90]() Specification : DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1012-(I) C Estab
3) CO-DRIVER SIDE GLASS[90]() Specification : CO-DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1013-(I) C Estab
4) SIDE GLASS[90]() Specification : SIDE GLASS GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1014-(I) C Estab
5) REAR GLASS (ARMY) MPV[90]() Specification : REAR GLASS (WITH RUBBER BEADING) (ARMY) MPV 645-10-1015(I) C Estab
6) SIDE GLASS TROOPER ARMY VER FOR UPGRADED MPV 4x4 LF NO 9010398096000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
7) WIND SHIELD GLASS FOR UPGRADED MPV 4x4 LF NO 9010398104000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
8) REAR GLASS FOR UPGRADED MPV 4x4 LF NO 9010398103000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
9) DRIVER SIDE GLASS ARMY VER FOR UPGRADED MPV 4x4 LF NO 9010398098000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
10) CO DRIVER SIDE GLASS ARMY VER FOR UPGRADED MPV 4x4 LF NO 9010398097000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
11) BULLET PROOF GLASSES WITH RUBBER BEADING for BP SML LF No 9413100018000[90]() Specification : SPECIFICATION NO. VFJ/R&D/LA/SP/BPV/GLASS/SML(4X4), DATED:14/06/2019 C Nonestab
12) 9010398112000 Rear Glass with Rubber Beading[90]() Specification : Specification will be given physically After firm Signs NDA documents. C Nonestab
13) 9010398113000 Wind Shield with Rubber Beading[90]() Specification : Specification will be given physically After firm Signs NDA documents. C Nonestab
14) 9010398114000 Driver Side Glass with gun port hole with rubber beading[90]() Specification : Specification will be given physically After firm Signs NDA documents. C Nonestab
15) 9010398115000 Side Glass with gun port hole with Rubber Beading[90]() Specification : Specification will be given physically After firm Signs NDA documents C Nonestab
16) 9010398116000 Co Driver Side Glass with gun port hole with rubber Beading[90]() Specification : Specification will be given physically After firm Signs NDA documents. C Nonestab
17) BULLET PROOF GLASS 50MM THICK FOR SIDE DOOR DRIVER SIDE[90]() Specification : VFJ/TSS/SP/TATA 03 C Nonestab
18) BULLET PROOF GLASS 50MM THICK FOR REAR DOOR[90]() Specification : VFJ/TSS/SP/TATA 03 C Nonestab
19) BULLET PROOF GLASS 50MM THICK FOR WIND SHIELD[90]() Specification : VFJ/TSS/SP/TATA 03 C Nonestab
Category : p
Grade : Grade I
Size : SS
1Vehicle Factory Jabalpur

Name Specification Use Status
1) WIND SHIELD GLASS (ARMY) MPV[90]() Specification : WIND SHIELD GLASS (ARMY) MPV (645-10-1011-(I) (WITH RUBBER BEADING) C Estab
2) DRIVER SIDE GLASS[90]() Specification : DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1012-(I) C Estab
3) CO-DRIVER SIDE GLASS[90]() Specification : CO-DRIVER SIDE GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1013-(I) C Estab
4) SIDE GLASS[90]() Specification : SIDE GLASS GLASS (WITH RUBBER BEADING) (ARMY) MPV (645-10-1014-(I) C Estab
5) REAR GLASS (ARMY) MPV[90]() Specification : REAR GLASS (WITH RUBBER BEADING) (ARMY) MPV 645-10-1015(I) C Estab
6) SIDE GLASS TROOPER ARMY VER FOR UPGRADED MPV 4x4 LF NO 9010398096000[90]() Specification : AS PER ATTACHED SPECIFICATION C Estab
7) WIND SHIELD GLASS FOR UPGRADED MPV 4x4 LF NO 9010398104000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
8) REAR GLASS FOR UPGRADED MPV 4x4 LF NO 9010398103000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
9) DRIVER SIDE GLASS ARMY VER FOR UPGRADED MPV 4x4 LF NO 9010398098000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
10) CO DRIVER SIDE GLASS ARMY VER FOR UPGRADED MPV 4x4 LF NO 9010398097000[90]() Specification : AS PER ATTACHED SPECIFICATION C Nonestab
11) BULLET PROOF GLASSES WITH RUBBER BEADING for BP SML LF No 9413100018000[90]() Specification : SPECIFICATION NO. VFJ/R&D/LA/SP/BPV/GLASS/SML(4X4), DATED:14/06/2019 C Nonestab
12) 9010398112000 Rear Glass with Rubber Beading[90]() Specification : Specification will be given physically After firm Signs NDA documents. C Nonestab
13) 9010398113000 Wind Shield with Rubber Beading[90]() Specification : Specification will be given physically After firm Signs NDA documents. C Nonestab
14) 9010398114000 Driver Side Glass with gun port hole with rubber beading[90]() Specification : Specification will be given physically After firm Signs NDA documents. C Nonestab
15) 9010398115000 Side Glass with gun port hole with Rubber Beading[90]() Specification : Specification will be given physically After firm Signs NDA documents C Nonestab
16) 9010398116000 Co Driver Side Glass with gun port hole with rubber Beading[90]() Specification : Specification will be given physically After firm Signs NDA documents. C Nonestab
17) BULLET PROOF GLASS 50MM THICK FOR SIDE DOOR DRIVER SIDE[90]() Specification : VFJ/TSS/SP/TATA 03 C Nonestab
18) BULLET PROOF GLASS 50MM THICK FOR REAR DOOR[90]() Specification : VFJ/TSS/SP/TATA 03 C Nonestab
19) BULLET PROOF GLASS 50MM THICK FOR WIND SHIELD[90]() Specification : VFJ/TSS/SP/TATA 03 C Nonestab
20) TROOPER GLASS[90]() Specification : VFJ/TSS/SP/TATA 03 C Nonestab
21) BULLET PROOF GLASS 50MM THICK FOR SIDE DOOR CO DIVER SIDE[90]() Specification : VFJ/TSS/SP/TATA 03 C Nonestab
Category : p
Grade : Grade I
Size : SS
2557 JAINSON HOSIERY INDUSTRIES
266 INDUSTRIAL AREA A INDUSTRIAL AREA A LUDHIANA LUDHIANA Punjab
PIN1 : 141003
Phone No. : 9501903800
GSTIN : 03AAAFJ8560C1ZS 		JLDJOO662E

Download 		1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) POLYESTER SATIN PIPING 7 CM OLIVE GREEN[21]() Specification : NO. TS/1565/BLANKET SUPR OG DT. 09.06.2012 POLY. SATIN PIPING 7CM OG OCFS/BLANKET SUPERIOR OG/PIPING/2012. AS PER RELEVANT CLAUSE OF SPECIFICATION.AS PER RELEVANT CLAUSE OF SPECIFICATION. R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) Yarn Wool Polyamide (80:20) 240 Tex OG[21]() Specification : OCFS/Yarn Wool Polyamide (80:20) 240Tex OG/2012 R Estab
2) Yarn Worsted 55 Tex/2 Dark OG[21]() Specification : As per requirements & specifications R Estab
3) Yarn Wool Polyamide (80:20) 240 Tex Red[21]() Specification : As Per Specification & Requirement R Estab
4) Yarn Wool Polyamide (80:20) 240 Tex Air Force Blue[21]() Specification : As Per Requirements & Specifications R Estab
5) Yarn Worsted 55 Tex/2 Dark BG Shrink Resistant[21]() Specification : As per Requirements & Specifications R Estab
6) Serge Battle Dress Poly Wool 142 Cms Minimum Width[21]() Specification : S/5432/PW/TC-19(a),Min Width 142 cms required to be water repellant & should conform to standard / values laid down in R/O the bundesmann test as mentioned in Clause 6.1(q) of above specification. Testing of % composition of Wool & polyest R Estab
7) Yarn Worsted 80 Tex Dark OG[21]() Specification : PROV/OCFS/SOCKSYARNOG/64 Except that lot size & sampling plan as per Appendix B R Estab
8) Yarn Worsted 80 Tex X 3 Dark OG[21]() Specification : PROV/OCFS/SOCKSYARNOG/64, Except that lot size & Sampling plan as per Appendix B R Estab
9) Yarn wool Polyamide 240 Tex Navy Blue[21]() Specification : No. "OCFS/YARN WOOL POLY AMIDE (80:20) 240 TEX OG/2012" Except that Shade of the Yarn Shall be as per Pantone No. 19-3933 TPX & Annx-I R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) Polyester fleece fabric knitted O G 150 cm min[21]() Specification : SPECN: AS PER APPENDIX 'C' OF PROV. SPECIFICATION NO. S/5094/TC-1(B)/Cap Bal OG (Imp)RELEVANT CLAUSE OF SPECIFICATION NO. IND/TC/1208 AS PER SPECIFICATION NO. IND/TC/1208 R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) Double Layer bonded Polyester Fleece White 150 cm width[21]() Specification : IND/TC/1208 R Estab
Category :
Grade : Grade III
Size : S
1Ordnance Clothing Factory Shahjahanpur

Name Specification Use Status
1) INNER LINING KNITTED FABRIC OUTER JACKET POLYESTER 145 GSM WIDTH 150 CM MIN[21]() Specification : INNER LINING KNITTED FABRIC (OUTER JACKET) POLYESTER 145 GSM WIDTH 150 CM. (MIN.) PANTONE SHADE NO. 19-0516 TPX SPECIFICATION :- AS PER APPENDIX 'D' OF PROVISIONAL SPECIFICATION NO. S/3558/A/TC-15/COAT ECC (a) R Estab
Category :
Grade : Grade III
Size : S
2558 ANAND ENGINEERING CORPORATION
101, UPTRON ESTATE PANKI INDUSTRIAL AREA KANPUR Uttar Pradesh
PIN1 : 208022
Phone No. : 9582582324
GSTIN : 09ABOPA4517F1ZT 		ABOPA4517F

Download 		1Small Arms Factory

Name Specification Use Status
1) Steel Blank of Cylinder Gas[01]() Specification : Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G). C Nonestab
Category :
Grade : Grade III
Size : S
1Small Arms Factory

Name Specification Use Status
1) STEEL BLANK OF RECEIVER PLATE LEFT AND RIGHT[70]() Specification : STEEL BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG.SKM-960* THE PROFILE & REFERENCE HOLES (DIA 13.39+/-0.02 & DIA 18.025 +/-0.02) TO BE DONE SIMULTANEOUSLY IN BOTH PLATES KEPT TOGETHER ONE ABOVE ANOTHER & NUMBERED TO MEKE SET. DRG.SKM-884* C Nonestab
Category :
Grade : Grade III
Size : S
2559 J.M.D Consultants Pvt. Limited, New Delhi as an Indian Authorized Dealer of a foreign firm M/s Heathcoat Fabrics Limited, U.K.
A-126 Niti Bagh New Delhi Delhi
PIN1 : 110049
Phone No. : 011-26868833, 		DELJ03048D

Download 		1Ordnance Parachute Factory

[Deemed Registration]
Name Specification Use Status
1) FABRIC NYLON LT. WT. 37g RIP STOP WEAVE OLIVE DRAB. SHADE NO 298 (AS PER SPECN. NO IS:5-1994), 94 CM. WIDTH Description : FABRIC NYLON LT. WT. 37g RIP STOP WEAVE OLIVE DRAB. SHADE NO 298 (AS PER SPECN. NO IS:5-1994), 94 CM. WIDTH() Specification : SPECIFICATION NO. IS:4726 - 1984. R Nonestab
2) FABRIC NYLON LT. WT. 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO298 ASPER IS:SPECN NO.IS:5-1994 122 CM WIDTH Description : FABRIC NYLON LT. WT. 37 GM RIPSTOP WEAVE OLIVE DRAB SHADE NO298 ASPER IS:SPECN NO.IS:5-1994 122 CM WIDTH() Specification : SPECN. NO. IS:4726-1984 R Nonestab
3) FABRIC NYLON 48 +- 2 GM PLAIN WEAVE ORANGE 100 CM WIDTH. Description : FABRIC NYLON 48 +- 2 GM PLAIN WEAVE ORANGE 100 CM WIDTH.() Specification : ADRDE/SPECN./2002/56(b)(VTY.NO.2) R Nonestab
4) FABRIC NYLON 48 + - 2 GMS U/D 95 CMS Description : FABRIC NYLON 48 + - 2 GMS U/D 95 CMS() Specification : SPECN:ADRDE/SPECN./2002/56(b)VARIETY NO.2 R Nonestab
5) FABRIC NYLON 66, 93g U/D 120 Cm. Description : FABRIC NYLON 66, 93g U/D 120 Cm.() Specification : ADRDE/SPECN/2000/53(b) R Nonestab
6) FABRIC NYLON 93GM U/D WIDTH 95 CM Description : FABRIC NYLON 93GM U/D WIDTH 95 CM() Specification : SPCNS NO.: ADRDE/SPECN/2000/53(b) R Nonestab
7) FABRIC COTTON MERCERISED 115 gm GRAY 94 CMS.WIDTH Description : FABRIC COTTON MERCERISED 115 gm GRAY 94 CMS.WIDTH() Specification : Spcn :-1. WEIGHT PER SQR.MTR.(IN GRMS)=115 gm. 2. WIDTH IN CM – 94 3. AIR POROSITY(Cub.Ft/Sqr.Ft./Sec.) - 25 TO 30. 4. BREAKING STRENGTH(In Kg)-50 Min. BOTH DIRECTION. 5. THICKNESS IN MM 0.25 (Max). R Nonestab
8) FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS. Description : FABRIC NYLON 136 GRAM UNDYED WIDTH 110 + - 1 CMS.() Specification : SPECIFICATION NO. : ADRDE/SPECN/1982/7(c) sampling Sampling Plan & criteria for conformity as per ADRDE/SPECN/I.P.S. R Nonestab
9) FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE OLIVE DRABSHADE NO.298 AS PER SPECN NO.IS:5, 94 CMS Description : FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE OLIVE DRABSHADE NO.298 AS PER SPECN NO.IS:5, 94 CMS() Specification : SPECN NO ADRDE/SPECN/1983/14 R Nonestab
10) FABRIC NYLON 185 GM UNDYED 92 CM . Description : FABRIC NYLON 185 GM UNDYED 92 CM .() Specification : SPECIFICATION NO.: ADRDE/SPECN/1993/43 R Nonestab
11) FABRIC NYLON 109g U/D 91.4cm Description : FABRIC NYLON 109g U/D 91.4cm() Specification : SPECN. NO.: ADRDE/SPECN/1985/28(c). R Nonestab
12) FABRIC NYLON 180 GM 94 CM U/D Description : FABRIC NYLON 180 GM 94 CM U/D() Specification : 1- LENGTH/ROLL -------- 100 M-----------------IS:1954 2-MASS/SQ.MTR.GM.------180+ -3----------------IS:1964 3-WIDTH CM(MIN) ------94 -----------------IS:1954 4-AIR POROSITY(CU.FT./SQ.FT/SEC)---3-6--------IS:472 R Nonestab
Category : s
Grade : 1
Size : S
2560 Industrial Trading Corporation
33/1 NS Road, Marshal House, Room No 520, 5th Floor, Kolkata, WB
PIN1 : 700001
Phone No. : 09830351076 		AABF14503K

Download 		1Ordnance Factory Ambajhari

[ENR Registration]
Name Specification Use Status
1) NORMALISED AND PEELED CARBON STEEL ROUND BAR TO SPECN BS 970 PT I 1983 GRADE 080M40 HAVING GRAIN SIZE 5 TO 8 IZOD IMPACTVALUE 20 POINT 340 NM MIN IN STRAIGHT LENGTH OF MTRS 15 SHORTS DOWN TO 1 POINT 5 2 5 METERS PERMITTED SIZE 41 DIA Description : NORMALISED AND PEELED CARBON STEEL ROUND BAR TO SPECN BS 970 PT I 1983 GRADE 080M40 HAVING GRAIN SIZE 5 TO 8 IZOD IMPACTVALUE 20 POINT 340 NM MIN IN STRAIGHT LENGTH OF MTRS 15 SHORTS DOWN TO 1 POINT 5 2 5 METERS PERMITTED SIZE 41 DIA() Specification : NORMALISED AND PEELED CARBON STEEL ROUND BAR TO SPECN.BS-970 PT-I-1983. GRADE 080M40 HAVING GRAIN SIZE 5 TO 8.IZOD IMPACTVALUE 20.340 NM MIN. IN STRAIGHT LENGTH OF MTRS. 15% SHORTS DOWN TO 1.5 TO 2.5 METERS. PERMITTED SIZE: 41.00- 0.1 MM R Estab
Category : dp
Grade : 3
Size : S

Copyright © 2025 - OFB