DoO(C&S) Vendor Panel | Page ,5864410ed410f3ec3feebfbea95b31c2fbe7862f

Warning!

You need to have JavaScript enabled to use this site.

Facility to apply for multiple items against multiple advertisement introduced. For details Click here || For any system/application related issues, please send the details of the issue to mail id: ofbqcvrcell[dot]ofb[at]ofb[dot]gov[dot]in

Items open for Registration

Search

Reset

No

Advertisement No.

Factory

Location

Items

22721

3173000403

Small Arms Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208009

Name	Code	Quantity	Approx Value	Select
ST BLANK OF RECEIVER PLATE LEFT AND RIGHT FOR MAG Description ST. BLANK OF RECEIVER PLATE LEFT & RIGHT TO DRG. SKM-960* WITH FIRM'S MAT. THE PROFILE & REF HOLES (SHOULDER LOCKING HOLE DIA 13 .39 (+_0.02) & BUSH MOUNTING FRONT HOLE DIA 18.025 (+_0.02) TO BE DONE SIMULT IN BOTH PLATES KEPT TOGETHER ONE ABOVE AND THER & NO. TO MAKE SET DRG. SKM 8842 & SKM-884/13 ENCL Specification AS PER DRG. Drawing no. SKM-960* DRG_STEEL_BLANK_OF_RECEIVER_PLATE.pdf Manufacturing Technology AS PER ENCLOSED manufacturing_inspection_for_RAW_material.pdf Testing / Inspection Facility AS PER ENCLOSED manufacturing_inspection_for_RAW_material.pdf	01	206 Set

22722

OPF/ADVANCE VR/EOI/JULY-17/ TAPE-05

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
TAPE TEXTILE NYLON 25.4MM U/D BS:3952N VATIETY NO 3 Description SPECIFICATION :-JSS 8315-6 Specification SPECIFICATION :-JSS 8315-6 Drawing no. Manufacturing Technology Testing / Inspection Facility	2103784274	155 Metre
TAPE NYLON TUBULAR 2.54 CM (BS-240 KG) Description SPECIFICATION:IND/ADE/0061 Specification SPECIFICATION:IND/ADE/0061 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786926	137 Metre
TAPE NYLON 44 MM O.G. 6914 N (705 KG.) Description SPECIFICATION NO. : IS:4228-1979 Specification SPECIFICATION NO. : IS:4228-1979 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101776056	687 Metre
TAPE COTTON SPECIAL 50.8 MM U/D Description SPECN.NO. IND/ADE/0069 (c). Specification SPECN.NO. IND/ADE/0069 (c). Drawing no. Manufacturing Technology Testing / Inspection Facility	2101774720	84 Metre
COTTON TAPE 76 MM O.G. Description SPECN.NO.: IS : 3255-1979 EXCEPT THAT :- i) In appearance shade finish and in other respect not defined in this Specn. the material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, Kanpur. ii) There shall be no presence of starch. iii) Loss of scouring mild method is to be followed in lieu of severe Method and shall not exceed 2%. iv) Sampling plan & criteria for conformity and Packing & Marking :- as per CQAT&C/QAI/TC-8/11(b). Specification SPECN.NO.: IS : 3255-1979 EXCEPT THAT :- i) In appearance shade finish and in other respect not defined in this Specn. the material shall conform to the sealed pattern held in the custody of the Controller, CQAT&C, Kanpur. ii) There shall be no presence of starch. iii) Loss of scouring mild method is to be followed in lieu of severe Method and shall not exceed 2%. iv) Sampling plan & criteria for conformity and Packing & Marking :- as per CQAT&C/QAI/TC-8/11(b). Drawing no. Manufacturing Technology Testing / Inspection Facility	2101774713	1694 Metre
TAPE FASTENER VELCRO SYNTHETIC HOOK 25 MM O.G. Description SPECIFICATION NO. : IS : 8156:1994 Specification SPECIFICATION NO. : IS : 8156:1994 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786861	37 Metre
TAPE FASTENER VELCRO SYNTHETIC LOOP 25 MM O.G. Description SPECIFICATION NO. : IS : 8156:1994 Specification SPECIFICATION NO. : IS : 8156:1994 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786860	37 Metre
SHEATH NYLON 30 MM U/D Description SPECN NO.AS PER PARTICULARS WIDTH -30MM THICKNESS -2.10 +-0.02MM WEIGHT/M -36.1grm NOs OF ENDS -240 TEXT OF YARNS-38.4X3 WEAVE -BRAIDED Specification SPECN NO.AS PER PARTICULARS WIDTH -30MM THICKNESS -2.10 +-0.02MM WEIGHT/M -36.1grm NOs OF ENDS -240 TEXT OF YARNS-38.4X3 WEAVE -BRAIDED Drawing no. Manufacturing Technology Testing / Inspection Facility	2101728441	963 Metre
TAPE NYLON BLACK STRETCH 26 MM (BS :1050 N) Description SPECIFICATION :-WIDTH -26MM. THICKNESS-0.58+-.01 MM WT./MTR.-6.6 GM NO.OF ENDS-178+1 INTERLOCKING PICKS/CM-26 TEX OF YARN:- WARP-15.6,WEFT-16.5X2,BS.1050N Specification SPECIFICATION :-WIDTH -26MM. THICKNESS-0.58+-.01 MM WT./MTR.-6.6 GM NO.OF ENDS-178+1 INTERLOCKING PICKS/CM-26 TEX OF YARN:- WARP-15.6,WEFT-16.5X2,BS.1050N Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786912	5904 Metre
TAPE NYLON TUBULAR BRAIDED 20 MM U/D (BS:5680-N) Description SPECIFICATION:- WDTH-20MM ,THICKNESS-1.92+.02MM -.01MM WEGHT/MTR.-20.5 GM (MAX.) NO. OF ENDS-132,TEX OF YARN-38.5X3 BS. -5680N , WEAVE-BRAIDED Specification SPECIFICATION:- WDTH-20MM ,THICKNESS-1.92+.02MM -.01MM WEGHT/MTR.-20.5 GM (MAX.) NO. OF ENDS-132,TEX OF YARN-38.5X3 BS. -5680N , WEAVE-BRAIDED Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786911	5579 Metre
TAPE COTTON THIN 30-MM U/D (BS:340-N) Description SPECIFICATION:-WIDTH-30MM THICKNESS-0.40+ - 0.02MM WEIGHT/MTR-5.3GM (MAX.) NO.OF ENDS-87 PICKS/CM -16 TEX OF YARNS -WARP- 17.8X2 WEFT- 17.8X2 BREAKING STRENGTH-340 N (MIN.) Specification SPECIFICATION:-WIDTH-30MM THICKNESS-0.40+ - 0.02MM WEIGHT/MTR-5.3GM (MAX.) NO.OF ENDS-87 PICKS/CM -16 TEX OF YARNS -WARP- 17.8X2 WEFT- 17.8X2 BREAKING STRENGTH-340 N (MIN.) Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786910	21258 Metre
TAPE TUBULAR NYLON 2.54 CM BS 1800 KG UNDYED Description SPECIFICATION NO.: BS=17650 N (1800 KG MIN.) WIDTH 25.4 + 0.4 MM THICKNESS 2.3+ 0.3 MM WT. PER MTR.IN GRM 40 MAX. Specification SPECIFICATION NO.: BS=17650 N (1800 KG MIN.) WIDTH 25.4 + 0.4 MM THICKNESS 2.3+ 0.3 MM WT. PER MTR.IN GRM 40 MAX. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786908	651 Metre
TAPE NYLON 14 MM THICK 230 KG OG/UNDYED Description SPECN. NO.IS:4228- 1968. Specification SPECN. NO.IS:4228- 1968. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786901	63 Metre
TAPE NYLON 14mm THICK 230 KG YELLOW Description SPECN NO.:-IS:4228-1968 Specification SPECN NO.:-IS:4228-1968 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786896	10 Metre
TAPE TUBULAR NYLON 18 MM BRAIDED U/D (700 KG.) Description SPECN. NO.ADDE/SPECN/1992/38. Specification SPECN. NO.ADDE/SPECN/1992/38. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786894	102 Metre
TAPE FASNER VELCRO 30 MM OG (LOOP) Description SPECN-NO:-IS:8156-1981. Specification SPECN-NO:-IS:8156-1981. Drawing no. Manufacturing Technology Testing / Inspection Facility	2110797693	21 Metre
VELCRO TAPE BLACK 16 MM HOOK Description SPECN NO.IS:8156-1981 Specification SPECN NO.IS:8156-1981 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101830053	124 Metre
VELCRO TAPE BLACK 16 MM HOOK Description SPECN.NO.IS:8156-1981 Specification SPECN.NO.IS:8156-1981 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101830052	124 Metre
TAPE POLYESTER 13 MM BS:1800 - N Description SPECIFICATION :- WIDTH---------------------13 MM +/-1 WEIGHT/MRT.IN GMS.--------4.8 GMS.MAX. B.S. IN NEWTON------------1800-N MIN. THICKNESS 500 GMS/CM.SQR.--0.51 MM +/-0.2 TEX OF YARN---WARP----52, WEFT------23.9. NO.OF ENDS----------------72. PICKS/CM------------------14. WEAVE---------------------2/2 POINTED TWILL WEAVE. Specification SPECIFICATION :- WIDTH---------------------13 MM +/-1 WEIGHT/MRT.IN GMS.--------4.8 GMS.MAX. B.S. IN NEWTON------------1800-N MIN. THICKNESS 500 GMS/CM.SQR.--0.51 MM +/-0.2 TEX OF YARN---WARP----52, WEFT------23.9. NO.OF ENDS----------------72. PICKS/CM------------------14. WEAVE---------------------2/2 POINTED TWILL WEAVE. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101796983	4879 Metre
TAPE POLYESTER 13.5 MM BS:3200-N Description SPECIFICATION :- WIDTH-------------------------13.5 MM +/-1 WEIGHT/MTR. IN Gms.-----------10.3 gms (MAX) B.S.IN NEWTON-----------------3200-N (MIN) THICKNESS 500 gms./CM.SQR.----1.03 MM (MAX) TEX OF YARN----WARP--110 (FACE + BACK),WEFT--120.60 AND BINDER--25.30 NO.OF ENDS--------63 (FACE + BACK)+ 7 BINDER PICKS/CM----------12/13 (BOTH LAYER) WEAVE-------------DOUBLE PLAIN. Specification SPECIFICATION :- WIDTH-------------------------13.5 MM +/-1 WEIGHT/MTR. IN Gms.-----------10.3 gms (MAX) B.S.IN NEWTON-----------------3200-N (MIN) THICKNESS 500 gms./CM.SQR.----1.03 MM (MAX) TEX OF YARN----WARP--110 (FACE + BACK),WEFT--120.60 AND BINDER--25.30 NO.OF ENDS--------63 (FACE + BACK)+ 7 BINDER PICKS/CM----------12/13 (BOTH LAYER) WEAVE-------------DOUBLE PLAIN. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101796982	22146 Metre

22723

OPF/ADVANCE VR/EOI/JULY-17/ TAPE-04

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
TAPE TUBULAR NY. 14MM BS 850 KG. Description SPCN. NO. ADRDE/SPECN/1981/6 Specification SPCN. NO. ADRDE/SPECN/1981/6 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786942	1096 Metre
VALCRO FASTENER TAPE O.G. 50 MM LOOP Description SPECIFICATION NO. : IS : 8156-1981 Specification SPECIFICATION NO. : IS : 8156-1981 Drawing no. Manufacturing Technology Testing / Inspection Facility	2199024409	107 Metre
VELCRO FASTENER TAPE O.G. 50 MM HOOK Description SPECIFICATION NO. : IS : 8156-1981 Specification SPECIFICATION NO. : IS : 8156-1981 Drawing no. Manufacturing Technology Testing / Inspection Facility	2199022926	128 Metre
TAPE FASTENER VELCRO 20 MM LOOP Description SPECIFICATION IS : 8156 OF 1981. Specification SPECIFICATION IS : 8156 OF 1981. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101830058	36 Metre
TAPE FASTENER VELCRO 20 MM HOOK Description SPECIFICATION IS : 8156 - 1981. Specification SPECIFICATION IS : 8156 - 1981. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101830057	25 Metre
TAPE NYLON 19 MM O.G. BS=193 KGS. Description SPCN.NO. IS:4228-1967. Specification SPCN.NO. IS:4228-1967. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101796988	211 Metre
TAPE NYLON 25.4 MM BS=137 KGS. U/D Description SPCN.NO.IND/ADE/0072. Specification SPCN.NO.IND/ADE/0072. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101796985	201 Metre
TAPE NYLON 14 MM THICK U/D 230 KG Description SPECN.NO.IS:4228-1968. Specification SPECN.NO.IS:4228-1968. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786966	338 Metre
TAPE NYLON 26MM MEDIUM OG 600 KG BS. Description SPECCCN. NO. ADDE/BP/1 (b) ROLL LENGTH 100 MTR. EXCLUDING SAMPLING Specification SPECCCN. NO. ADDE/BP/1 (b) ROLL LENGTH 100 MTR. EXCLUDING SAMPLING Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786902	829 Metre
TAPE NYLON TUBULAR 2.54 CM U/D 1850 KG Description AS PER PARTICULARS GIVEN IN SHEET NO.102 OF DRAWING NO. ADRDE/1164/A-7(a) WIDTH - 25.4 MM, THICKNESS - 2.35 MM (MAX) MASS/METER - 36.5 GM (MAX.) NO. OF ENDS - 316 +2 (GOLDEN THREAD AT CENTRE) PICKS/CM - 10 INCLUDING BOTH LAYERS B.S. - 1850 KG (MIN.) WEAVE - TUBULAR PLAIN Specification AS PER PARTICULARS GIVEN IN SHEET NO.102 OF DRAWING NO. ADRDE/1164/A-7(a) WIDTH - 25.4 MM, THICKNESS - 2.35 MM (MAX) MASS/METER - 36.5 GM (MAX.) NO. OF ENDS - 316 +2 (GOLDEN THREAD AT CENTRE) PICKS/CM - 10 INCLUDING BOTH LAYERS B.S. - 1850 KG (MIN.) WEAVE - TUBULAR PLAIN Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786895	901 Metre
RIBBON NYLON 50 MM 250 KG U/D Description SPECN.NO:-ADRDE/QAC/TECH.PART/07/01(b). Specification SPECN.NO:-ADRDE/QAC/TECH.PART/07/01(b). Drawing no. Manufacturing Technology Testing / Inspection Facility	2101682191	106 Metre
TAPE VELCRO 25MM (FEMALE ) Description SPECN-IS:8156-1981 Specification SPECN-IS:8156-1981 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101221280	54 Metre
TAPE NYLON 21 MM BS:600 KGS U/D Description SPECN.NO:-ADRDE/SPECN/2000/54(b) Specification SPECN.NO:-ADRDE/SPECN/2000/54(b) Drawing no. Manufacturing Technology Testing / Inspection Facility	2110797692	11 Metre
TAPE NYLON 26 MM BS:450 KGS STEEL GREY Description SPECN-NO:-ADRDE/SPECN/1992/38 Specification SPECN-NO:-ADRDE/SPECN/1992/38 Drawing no. Manufacturing Technology Testing / Inspection Facility	2110797689	141 Metre
TAPE NYLON 44 MM BS:705 kg. STEEL GREY Description SPCEN.AS PER IS: 4228-1979. Specification SPCEN.AS PER IS: 4228-1979. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101796992	46 Metre
TAPE NYLON 2.54 CM BS-227 KG STEEL GREY Description SPECN-ADDE/BP/3(c) Specification SPECN-ADDE/BP/3(c) Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786917	25 Metre
TAPE NYLON 19 MM THICK BS 193 KG UNDYED.V. NO:2 Description SPECN. NO. JSS:8315-6. Specification SPECN. NO. JSS:8315-6. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786819	6185 Metre
TAPE NYLON 2.6 CM MED. 600 KG STEEL GREY Description SPECIFICATION NO.:- ADDE/BP/1(b) Specification SPECIFICATION NO.:- ADDE/BP/1(b) Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786937	428 Metre
TAPE COTTON SPECIAL 12.7MM SCOURED. (1)Specn No.IS:3255-79 Description Except that in apperance finish and all other respects not defined in this specn., the material shall conform to the sealed pattern held in the custody of controller CQAT&C Kanpur.There shall be no presence of starch. Scouring loss Mild method is to be followed in lieu of severe method and shall not exceed 2% picks/cm (-1) tolerance to be permittd. In addition the firm shall get their name or trade mark woven/stamped alongwith seldvedges at a interval of one meter on either side of the tape.(2)Sampling plan and criteria of conformtty:as per QAI NO.CQAT&C/TC-8/11(b).(3)Packing Marking:As per relevant clause of specn. Specification Except that in apperance finish and all other respects not defined in this specn., the material shall conform to the sealed pattern held in the custody of controller CQAT&C Kanpur.There shall be no presence of starch. Scouring loss Mild method is to be followed in lieu of severe method and shall not exceed 2% picks/cm (-1) tolerance to be permittd. In addition the firm shall get their name or trade mark woven/stamped alongwith seldvedges at a interval of one meter on either side of the tape.(2)Sampling plan and criteria of conformtty:as per QAI NO.CQAT&C/TC-8/11(b).(3)Packing Marking:As per relevant clause of specn. Drawing no. Manufacturing Technology Testing / Inspection Facility	2101774701	188 Metre
TAPE NYLON 28 MM U/D 7500N BS,SPECNS.NO.-AS UNDER PARTCULARS Description 1-LENGTH PER ROLL(MIN) --100M ---IS:1954 2-WIDTH IN MM 28 + - 0.5 ---IS:1954 3-THICKNESS IN MM AT 200GM/CM^2 PRESSURE(MAX)--1.0--IS:7702 4-MASS,gm,MAX --17gm ---IS:4727 5-BREAKING LOAD "N" MIN. --7500 ---IS:1969 6-TOTAL NO.OF ENDS(FULL WIDTH) --135 ----IS:1963 7-PICKS/CM --14 -----IS:1963 8-LINEAR DENSITY OF YARN,TEX WARP ---93.3 WEFT ---23.3 X 2 9-WEAVE PLAIN ----VISUAL (2 PICKS/SHED) Specification 1-LENGTH PER ROLL(MIN) --100M ---IS:1954 2-WIDTH IN MM 28 + - 0.5 ---IS:1954 3-THICKNESS IN MM AT 200GM/CM^2 PRESSURE(MAX)--1.0--IS:7702 4-MASS,gm,MAX --17gm ---IS:4727 5-BREAKING LOAD "N" MIN. --7500 ---IS:1969 6-TOTAL NO.OF ENDS(FULL WIDTH) --135 ----IS:1963 7-PICKS/CM --14 -----IS:1963 8-LINEAR DENSITY OF YARN,TEX WARP ---93.3 WEFT ---23.3 X 2 9-WEAVE PLAIN ----VISUAL (2 PICKS/SHED) Drawing no. Manufacturing Technology Testing / Inspection Facility	2101786939	33609 Metre

22724

110170194

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
FABRIC NYLON LOW POROSITY 52 GM RIP STOP WEAVE ORANGE 94 CM Description FABRIC NYLON LOW POROSITY 52 GM,RIP STOP WEAVE ORANGE 94 CM Specification SECIFICATION NO. : ADRDE/SPECN/1983/14 (a) Drawing no. Manufacturing Technology As per Specification/Drawing ADRDE_SPECN_1983_14_a.pdf Testing / Inspection Facility As per Specification/Drawing ADRDE_SPECN_1983_14_a.pdf	2101211903	4667 Metre

22725

110170193

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
QUICK RELEASE LOCK TP WITH BUCKLE Description QUICK RELEASE LOCK TP WITH BUCKLES Specification DRG.NO.-ADRDE/PAS/2007/16. Drawing no. DRG.NO.-ADRDE/PAS/2007/16. Manufacturing Technology As per Specification/Drawing Quick_Release_Lock_TP_with_Buckles_ADRDE_PAS.pdf Testing / Inspection Facility As per Specification/Drawing Quick_Release_Lock_TP_with_Buckles_ADRDE_PAS.pdf	2110019011	179 Number

22726

110170100

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
THREAD SEWING NYLON 66 Bonded BS 4point5 Kgf Navy Blue Description THREAD SEWING NYLON '66' Bonded BS: 4.5 Kgf. Navy Blue Specification Spec.No.ADRDE/TDTM/TH/2009/1(c) Dtd:-20.05.21, Shade No. 106 AS PER IS-5-1994 THE THREAD SHOULD BE BONDED THREAD Drawing no. Manufacturing Technology As per Specification ADRDE_TDTM_TH_2009_1(c)_TECHNICAL_PARTICULARS_FOR_SEWING_THREAD _NYLON_66 _UNDYED_DYED_NON-_BONDED _4_1_kgf_BS_BONDED _4_5kgf_BS.pdf Testing / Inspection Facility As per Specification CV_norms_for_various_Types_of_Nylon _Polyester_and_cotton_Sewing_Threads.pdf	2103784268	3170 Kilometer(km)

22727

110170195

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
TAPE NYLON 12MM THICK 450KG U/D Description specn.no:-ADRDE/QMS/TDTM/SPECN/93 Specification specn.no:-ADRDE/QMS/TDTM/SPECN/93 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101797647	58723 Metre

22728

110170197

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
FABRIC NYLON 66 93g Undyed 120 Cm Description FABRIC NYLON 66, 93g U/D 120 Cm. Specification ADRDE/SPECN/2000/53(c) Drawing no. Manufacturing Technology As per Drawing / Specification Fabric_Nylon_93_gsm_Undyed_Dyed_ADRDE_SPECN_2000_53(c).pdf Testing / Inspection Facility As per Drawing / Specification Fabric_Nylon_93_gsm_Undyed_Dyed_ADRDE_SPECN_2000_53(c).pdf	2101221251	21729 Metre

22729

110170167

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
PULLY Description SPECN. NO. ADRDE/1159-A-2/SA-6 Specification SPECN. NO. ADRDE/1159-A-2/SA-6 Drawing no. Manufacturing Technology Testing / Inspection Facility	2101069001	193 Number

22730

110170196

Ordnance Parachute Factory

The General Manager,
Kanpur
Kanpur
Kanpur, Uttar Pradesh
208004

Name	Code	Quantity	Approx Value	Select
DUCK NYLON 230 GM STEEL GREY 91point4 CM WIDTH Description DUCK NYLON 230 GM STEEL GREY 91.4 CM WIDTH Specification SPECN.NO.ADRDE/SPECN./1984/23(d) Drawing no. Manufacturing Technology As per Specification/Drawing ADRDE_SPECN_1984_23_d.pdf Testing / Inspection Facility As per Specification/Drawing ADRDE_SPECN_1984_23_d.pdf	2101142715	828 Metre

22731

OLF/MM-2/T-1706011536

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
COVER AS PER DRG NO 71940300031 (LF 7440205937) Description COVER AS PER DRG NO 71940300031 (LF 7440205937) Specification COVER AS PER DRG NO 71940300031 (LF 7440205937) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	98 Number
COVER AS PER LF 7440205936 Description COVER AS PER LF NO 7440205936 Specification COVER AS PER LF NO 7440205936 Drawing no. DRG NO 7194.03.00.021 Manufacturing Technology MECHANICAL COMPONENT manufacturing_technology_files.docx Testing / Inspection Facility MECHANICAL COMPONENT testing_inspection_file.docx	74	98 Number
BRACKET AS PER DRG NO BL8.095.524 (LF 7440205930) Description BRACKET AS PER DRG NO BL8.095.524 (LF 7440205930) Specification BRACKET AS PER DRG NO BL8.095.524 (LF 7440205930) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number

22732

OLF/MM-2/T-1706011540

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
FLANGE AS PER DRG NO ADSH8232221 (LF 7440205920) Description FLANGE AS PER DRG NO ADSH8232221 (LF 7440205920) Specification FLANGE AS PER DRG NO ADSH8232221 (LF 7440205920) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number
FLANGE AS PER DRG NO ADSH8230005 (LF 7440205919) Description FLANGE AS PER DRG NO ADSH8230005 (LF 7440205919) Specification FLANGE AS PER DRG NO ADSH8230005 (LF 7440205919) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number
FLANGE AS PER DRG NO ADSH8230004 (LF 7440205918) Description FLANGE AS PER DRG NO ADSH8230004 (LF 7440205918) Specification FLANGE AS PER DRG NO ADSH8230004 (LF 7440205918) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number
CONTROL ROD AS PER DRG NO BL8352489 (LF 7440205911) Description CONTROL ROD AS PER DRG NO BL8352489 (LF 7440205911) Specification CONTROL ROD AS PER DRG NO BL8352489 (LF 7440205911) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number
CONTROL ROD AS PER DRG NO BL8352488 (LF 7440205910) Description CONTROL ROD AS PER DRG NO BL8352488 (LF 7440205910) Specification CONTROL ROD AS PER DRG NO BL8352488 (LF 7440205910) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number

22733

OLF/MM-2/T-1706011535

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
BODY AS PER DRG NO AL7804119 FOR 1A43-BLOCK D (LF 7440205951) Description BODY AS PER DRG NO AL7804119 FOR 1A43-BLOCK D (LF 7440205951) Specification BODY AS PER DRG NO AL7804119 FOR 1A43-BLOCK D (LF 7440205951) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	248 Number
ARMATURE AS PER DRG NO AL7774031 FOR 1A43 (LF 7440205950) Description ARMATURE AS PER DRG NO AL7774031 FOR 1A43 (LF 7440205950) Specification ARMATURE AS PER DRG NO AL7774031 FOR 1A43 (LF 7440205950) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	248 Number
WALL LF NO 7440205949 Physical Verification needed Description WALL AS PER LF NO 7440205949 Specification WALL AS PER DRAWING NO 7194.03.00.041 (LF 7440205949) Drawing no. DRAWING NO 7194.03.00.041 Manufacturing Technology MECHANICAL COMPONENT manufacturing_technology_files.docx Testing / Inspection Facility MECHANICAL COMPONENT testing_inspection_file.docx	74	98 Number
LINING AS PER DRG NO 7194030002 (LF 7440205947) Description LINING AS PER DRG NO 7194030002 (LF 7440205947) Specification LINING AS PER DRG NO 7194030002 (LF 7440205947) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	98 Number
GASKET AS PER DRG NO 70843200002-05 (LF 7440205946) Description GASKET AS PER DRG NO 70843200002-05 (LF 7440205946) Specification GASKET AS PER DRG NO 70843200002-05 (LF 7440205946) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	98 Number
BUSHING AS PER DRG NO 70253206407 (LF 7440205939) Description BUSHING AS PER DRG NO 70253206407 (LF 7440205939) Specification BUSHING AS PER DRG NO 70253206407 (LF 7440205939) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	294 Number
LOBE AS PER DRG NO 1134.76.00.062 (LF 7440205938) Description LOBE AS PER DRG NO 1134.76.00.062 (LF 7440205938) Specification LOBE AS PER DRG NO 1134.76.00.062 (LF 7440205938) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	98 Number

22734

OLF/MM-2/T-1706011534

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
LUG TO DRG NO BSH8669028 (LF 9927089032) Description LUG TO DRG NO BSH8669028 (LF 9927089032) Specification LUG TO DRG NO BSH8669028 (LF 9927089032) Drawing no. Manufacturing Technology Testing / Inspection Facility	99	622 Number
STRIP AS PER DRG NO BL8603454 (LF 7440205931) Description STRIP AS PER DRG NO BL8603454 (LF 7440205931) Specification STRIP AS PER DRG NO BL8603454 (LF 7440205931) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	150 Number
YOKE AS PER DRG NO BL8217295 (LF 7440205929) Description YOKE AS PER DRG NO BL8217295 (LF 7440205929) Specification YOKE AS PER DRG NO BL8217295 (LF 7440205929) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number
BUTTON AS PER DRG NO BL8337308 (LF 7440205926) Description BUTTON AS PER DRG NO BL8337308 (LF 7440205926) Specification BUTTON AS PER DRG NO BL8337308 (LF 7440205926) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number
BUTTON AS PER DRG NO BL8337357 (LF 7440205925) Description BUTTON AS PER DRG NO BL8337357 (LF 7440205925) Specification BUTTON AS PER DRG NO BL8337357 (LF 7440205925) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number
BUTTON AS PE DRG NO BL8337357-01 (LF 7440205924) Description BUTTON AS PE DRG NO BL8337357-01 (LF 7440205924) Specification BUTTON AS PE DRG NO BL8337357-01 (LF 7440205924) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number
LEVER AS PER DRG NO BL9185930 (LF 7440205923) Description LEVER AS PER DRG NO BL9185930 (LF 7440205923) Specification LEVER AS PER DRG NO BL9185930 (LF 7440205923) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number
FILTER AS PER DRG NO NBL8886.000 (LF 7440205922) Description FILTER AS PER DRG NO NBL8886.000 (LF 7440205922) Specification FILTER AS PER DRG NO NBL8886.000 (LF 7440205922) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number
GASKET AS PER DRG NO OLF/MISC/926 (LF 7440205921) Description GASKET AS PER DRG NO OLF/MISC/926 (LF 7440205921) Specification GASKET AS PER DRG NO OLF/MISC/926 (LF 7440205921) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number
STUD AS PER DRG NO BL7734106 (LF 7440205917) Description STUD AS PER DRG NO BL7734106 (LF 7440205917) Specification STUD AS PER DRG NO BL7734106 (LF 7440205917) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number
STUD AS PER DRG NO BL7734104 (LF 7440205916) Description STUD AS PER DRG NO BL7734104 (LF 7440205916) Specification STUD AS PER DRG NO BL7734104 (LF 7440205916) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number
PLUG AS PER DRG NO BL8656941 (LF 7440205913) Description PLUG AS PER DRG NO BL8656941 (LF 7440205913) Specification PLUG AS PER DRG NO BL8656941 (LF 7440205913) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number
PLUG AS PER DRG NO BL8656060 (LF 7440205912) Description PLUG AS PER DRG NO BL8656060 (LF 7440205912) Specification PLUG AS PER DRG NO BL8656060 (LF 7440205912) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	200 Number

22735

OLF/MM-2/T-1706011533

Opto Electronic Factory

Dehradun
Dehradun
Dehradun
Dehradun, Uttaranchal
248008

Name	Code	Quantity	Approx Value	Select
COVER AS PER DRG NO NO BL8040782 FOR PNK4S (LF 7440205928) Description COVER AS PER DRG NO NO BL8040782 FOR PNK4S (LF 7440205928) Specification COVER AS PER DRG NO NO BL8040782 FOR PNK4S (LF 7440205928) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number
BODY AS PER DRG NO BL8021688 FOR PNK-4S (LF 7440205927) Description BODY AS PER DRG NO BL8021688 FOR PNK-4S (LF 7440205927) Specification BODY AS PER DRG NO BL8021688 FOR PNK-4S (LF 7440205927) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number
LEVER AS PER DRG NO BL9.185.894 FOR PNK-4S (LF 7440205915) Description LEVER AS PER DRG NO BL9.185.894 FOR PNK-4S (LF 7440205915) Specification LEVER AS PER DRG NO BL9.185.894 FOR PNK-4S (LF 7440205915) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number
LEVER AS PER DRG NO BL9.185.895 FOR PNK-4S (LF 7440205914) Description LEVER AS PER DRG NO BL9.185.895 FOR PNK-4S (LF 7440205914) Specification LEVER AS PER DRG NO BL9.185.895 FOR PNK-4S (LF 7440205914) Drawing no. Manufacturing Technology Testing / Inspection Facility	74	50 Number

Proceed