Specification : It is intimated that the DRAWINGS/ SPECIFICATIONS will be available on the below mentioned address :
Govt. Of India,
Ministry of Defence (DGQA)
Controllerate of Quality Assurance (Amn),
Khadki, Pune- 411 003
Telephone: 25824013-1
Specification : SPECN. 1)Raw material ;100% Cotton, 2) Count: 30s, 3) Ends per inch : 76,4) Picks per inch: 76, 5)Width: 90 cm, 6) Weave:Plain, 7) Coating: HDPE, 8) Colour: White, 9)GSM: 148, 10)Shrinkage %(Tumble Dry):2, 11) Bond Strength (KGS):Greater t
R
Nonestab
Category : DP
Grade : II
Size :
25
Metchem Industries
No 86E Second main road,Ambattur Industrial estate,Chennai-58,Tamilnadu 2nd main road Chennai Tamil Nadu
PIN1 : 600058
Phone No. : 26233272 GSTIN :
33AABFM7284R1ZN
1) C R G M STRIP FOR AK47 KF25 ITEM CODE 0710160157[90]()
Specification : C.R. STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.57±0.015MM TX150+2.0-0.00MM W. IN COIL FORM. COIL Wt. 90-120 Kg. INT DIA OG COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE BOW LIMITS 5MM IN 3 METER MAX. HARDNESS 60 TO
R
Nonestab
2) C R GM STRIP 148 MM 9 MM CUP ITEM CODE 0710161148[90]()
Specification : C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 0.56+0.02-0.0 MM THICK, 148+2.0-0.0 MM WIDE IN COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM PER 3 METE
R
Nonestab
3) STRIP FOR G M CUP 7 POINT 62 MM TRACER ITEM CODE 0710160166[90]()
Specification : C.R. GM STRIP ANNEALED & PICKLED READY TO CUP TO SIZE: 1.66±0.02 MM THICK, 148+1.0-0.0 MM WIDE, COIL FORM. COIL Wt. 90-120 Kg. INTERNAL DIA , OF COIL 300-400 MM CONFIRMING SPECIFICATION IS: 2768 LATEST ISSUE. BOW LIMITS 5MM IN 3 METER MAX
R
Nonestab
4) CONV G M SCRAP TO STRIP 1 POINT 08 MM ITEM CODE 7005080005[90]()
Specification : CONV. GM SCRAP TO STRIP 1.08 MMT ITEM DESC : CONV. OF GM SCRAP TO C.R. STRIP ANNEALED & PICKLD READY TO CUP TO SIZE: 1.08±0.01 MM THX138±2.00-0.00 MM WIDE COIL WT WT. 90 TO 120 KGS. INT DIA OF COIL 300-400 MM CONFIRMING TO IS 2768 (LATE
R
Nonestab
5) CONVERSION GM SCRAP TO STRIP POINT 150 X 1 POINT 57 ITEM CODE 7005080015[90]()
Specification : CONV. GM SCRAP TO STRIP .150X1.57 ITEM DESC: CONVERSION OF GILDING METAL SCRAP TO STRIP, SIZE: 150 MM+2 MM/0.00 MM WIDE X 1.57 MM+0.015/-0.015 MM TH., SPCN. IS: 2768 (LATEST ISSUE) OR JSS-4710-1 GR.II ROLLED ANNEALED IN COIL FROM 1/D 300-
R
Nonestab
6) CONVERSION GM SCRAP TO STRIP 0 POINT 56 MM T ITEM CODE 7005070001[90]()
Specification : CONVERSION OF G.M SCRAP TO C. R STRIP ANNEALED & PICKLED READY TO CUP SIZE : 148+2-0 MM W X 0.56+0.02-0.00MM TH. COIL WT: 90 TO 130 KG . INT. DIA OF COIL: 300 TO 400 MM. CONFORMING TO IS : 2768/ (LATEST ISSUE) BOW LIMIT : 5MM PER 3 m MAX.
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020
Description : copper strip 20 x 0 75 mm BS EN 1652 LF 0700261020()
Specification : COPPER STRIP 20+/_ 0.2 X 0 75 + 0 02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN BS EN 1652
Specification : COPPER STRIP 16+/-0.2 X 0.32+0.02 MM THICK IN COIL OF CONTINUOUS LENGTH TO SPECN.BSEN 1652:1998,MATL SYMBOL Cu-ETPMATL CONDN R-220.MATERIAL MUST BE HOMOGENEOUS, FREE FROMBURRS, BOWINESS (MAX) 2MM/MTR.COIL WT.8-10KG. ID WITH NYLONRING 300M
R
Nonestab
2) Copper Strip 24X0point3 mm IS 14811 O LF 0710261030
Description : Copper Strip 24X0point3 mm IS 14811 O LF 0710261030()
Specification : Copper Strip 24+/- 0.5mm X 0.3 +/-0.015mm thick in coils to specn:- IS:14811-2000 "O" condition, chemical comp. as per IS: 191-2007 grade Cu ETP. I/D of coil = to be kept opened weight of coil =5 to 10 kg
1) FABRICATION OF GAS BLOCK TO DRG.NO.AO-18.01.020()
AS PER DRG.& SPECIFICATION
C
NOT ESTAB.
Category : P
Grade : I
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) FACE PAD PART NO.F13O3-OO719O IN FINISHED CONDITION()
AS PER DRG & SPECIFICATION
C
NOT ESTAB.
Category : P
Grade : II
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) FACE PAD PART NO.F13O3-OO719O IN FINISHED CONDITION[71]()
Specification : AS PER DRG & SPECIFICATION
R
Nonestab
2) IMPACT PROTECTION RIGHT TO DRG. NO 304052778 DC NO-19311-W DATED 02.03.2013 WITH ACCESSORIES I E INCLUDING CLEANING SACHET, STRAP & DOUBLE SIDED ADHESIVE DRG, NO- F- 1303-028990-A[71]()
Specification : AS PER DRAWING
C
Nonestab
3) Impact Protector Left to Drg No F1303-026871 for 84mm RL Mk-III[71]()
Specification : AS PER DRAWING
C
Nonestab
4) IMPACT PROTECTOR MUZZLE TO DRG.NO.304063075 (MODIFIED),PART NO.404031082 IN F/C[71]()
Specification : IMPACT PROTECTOR MUZZLE TO DRG.NO.304063075 (MODIFIED),PART NO.404031082 IN F/C
C
Nonestab
5) BAG NO:1 TO DRG. NO. F1303-027330H IN FINISHED CONDITION[71]()
Specification : BAG NO:1 TO DRG. NO. F1303-027330H IN FINISHED CONDITION
C
Nonestab
6) BAG NO:2 TO DRG. NO. F1303-027420G IN FINISHED CONDITION[71]()
Specification : BAG NO:2 TO DRG. NO. F1303-027420G IN FINISHED CONDITION
C
Nonestab
7) SHOULDER PAD ASSY. TO DRG. NO. F1303-007200 F IN FINISHED CONDITION D.C. NO. 19047-W DT.02.05.07[71]()
Specification : AS PER DRAWING
C
Nonestab
Category : p
Grade : Grade III
Size :
1Gun and Shell Factory
Name
Specification
Use
Status
1) Fabrication of Shutter ring to Drg.no.A.O.18.01.028()
AS PER DRG.& SPECIFICATION
C
NOT ESTAB.
2) Valve to Drg. no.A.O.18.03.010()
AS PER DRG.& SPECIFICATION
C
NOT ESTAB.
Category : P
Grade : I
Size :
S
1Small Arms Factory
Name
Specification
Use
Status
1) MAGAZINE ASSY. TO DRG. NO. 0204-03-03-00-07-000-00DA for JVPC()
AS PER DRG.
C
Not Estab.
Category : P
Grade : II
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) BIPOD ASSEMBLY (GUN MOUNT) COMPLETE TO DRG. F1303-028700 IN FINISHED CONDITION DC NO. 19047 W DT. 02.05.07[71]()
Specification : BIPOD ASSEMBLY (GUN MOUNT) COMPLETE TO DRG. F1303-028700 IN FINISHED CONDITION DC NO. 19047 W DT. 02.05.07
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Opto Electronic Factory
Name
Specification
Use
Status
1) GLAND[74]()
Specification : AS PER DRAWING
C
Estab
2) GASKET[74]()
Specification : AS PER DRAWING
C
Estab
3) GASKET[74]()
Specification : AS PER DRAWING
C
Estab
4) SPACER[74]()
Specification : AS PER DRAWING
C
Estab
5) SPACER[74]()
Specification : AS PER DRAWING
C
Estab
6) GASKET[74]()
Specification : AS PER DRAWING
C
Estab
7) GASKET[74]()
Specification : AS PER DRAWING
C
Estab
8) GASKET[74]()
Specification : AS PER DRAWING
C
Estab
9) GASKET[74]()
Specification : AS PER DRAWING
C
Estab
10) WASHER[74]()
Specification : AS PER DRAWING
C
Estab
11) GASKET[74]()
Specification : AS PER DRAWING
C
Estab
12) GASKET[74]()
Specification : AS PER DRAWING
C
Estab
13) GASKET[74]()
Specification : AS PER DRAWING
C
Estab
14) GASKET[74]()
Specification : AS PER DRAWING
C
Estab
15) GASKET VISOR IG46[74]()
Specification : AS PER DRAWING
C
Estab
Category : p
Grade : Grade I
Size :
S
1Opto Electronic Factory
Name
Specification
Use
Status
1) SHOCK ABSORBER TO DRG NO. B11-5.121 (LF:7440101208)[74]()
Specification : AS PER DRAWING
C
Estab
2) GLAND FOR GYRO STABILIZER TO DRG NO. AL8.233.379 (LF:7440202660)[74]()
Specification : AS PER DRAWING
C
Estab
3) GASKET FOR BLOCK BPV-29 TO DRG NO. BPV29.104 (LF:7440901247)[74]()
Specification : AS PER DRAWING
C
Estab
4) GASKET BPV29.112 (LF:7440901249)[74]()
Specification : AS PER DRAWING
C
Estab
5) KNOB (PUSH BUTTON) AS PER DRG NO. BPV29.280 (LF:7441120233)[74]()
Specification : AS PER DRAWING
C
Estab
6) RING FOR BLOCK BPV-29 TO DRG NO. PYU150.005 (LF:7445601236)[74]()
Specification : AS PER DRAWING
C
Estab
7) COVER AF8057112 (LF:7524010112)[75]()
Specification : AS PER DRAWING
C
Estab
8) PLASTIC MOULD HEAD REST AS PER DRG NO. BSH6.548.037 (LF:7582500001)[75]()
Specification : AS PER DRAWING
C
Estab
9) EYE GUARD TO DRG. NO. AL8647015 (LF:9927063762)[99]()
13) Hinge Driver Hatch Assembly forging
Description : Hinge Driver Hatch Assembly forging()
Specification : Hinge (Driver Hatch Assembly) forging
C
Estab
14) HOOK PART NO 675 57271 A
Description : HOOK PART NO 675 57271 A()
Specification : HOOK PART NO 675-57-271/A
C
Estab
15) LEVER CONTROL HAND/TORSION BAR
Description : LEVER CONTROL HAND/TORSION BAR()
Specification : LEVER CONTROL HAND
C
Estab
16) FORGING FOR PIVOT FOR TURRET ASSY.
Description : FORGING FOR PIVOT FOR TURRET ASSY.()
Specification : FORGING FOR PIVOT FOR TURRET ASSY.
C
Estab
17) THREADED BOSS M10X18MMX 25MM
Description : THREADED BOSS M10X18MMX18MM()
Specification : THREADED BOSS M10 X18MM X 18MM (LF No. 9013193479000)
C
Estab
18) THREADED BOSS M10 X 20MM OD X 30MM
Description : THREADED BOSS M10 X 20MM OD X 30MM()
Specification : THREADED BOSS M10 X 20MM (OD) X 30MM LENGTH TO DRG NO.: 218-03-1089/9
C
Estab
19) THREADED BOSS M12 X 1 point 75 X OD 20 X 20L
Description : THREADED BOSS M12 X 1 point 75 X OD 20 X 20L()
Specification : THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8
C
Estab
20) THREADED BOSS M12X 1 point 75 X OD 20X60 MM
Description : THREADED BOSS M12X 1 point 75 X OD 20X60 MM()
Specification : THREADED BOSS M12X1.75X OD 20X60 MM LENGTH MATERIAL : M.S.
C
Estab
21) THREADED BOSS M12 X 20MM OD X30MM
Description : THREADED BOSS M12 X 20MM OD X30MM()
Specification : THREADED BOSS M12 X 20MM (OD) X30MM LENGTH TO DRG NO.:218-03-1089/7
C
Estab
22) THREADED BOSS M6 X 12MM OD X12MM
Description : THREADED BOSS M6 X 12MM OD X12MM()
Specification : THREADED BOSS M6 X 12MM (OD) X12MM LENGTH TO DRG NO.218-03-1089/2
C
Estab
23) THREADED BOSS M6 12MM 16MM
Description : THREADED BOSS M6 12MM 16MM()
Specification : THREADED BOSS M6X12MMX16MM
C
Estab
24) THREADED BOSS M8 X 16MM OD X12MM
Description : THREADED BOSS M8 X 16MM OD X12MM()
Specification : THREADED BOSS M8 X 16MM (OD) X12MM LENGTH
C
Estab
25) THREADED BOSS M8 X 16MM OD X25MM
Description : THREADED BOSS M8 X 16MM OD X25MM()
Specification : THREADED BOSS M8 X 16MM (OD)X25MM LENGTH
C
Estab
26) THREADED BOSS M8 X 16MM OD X40MM
Description : THREADED BOSS M8 X 16MM OD X40MM()
Specification : THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8
C
Estab
Category : p
Grade : 3
Size :
S
1Small Arms Factory
[ENR Registration]
Name
Specification
Use
Status
1) PLUG FOR FIRING DEVICE 1B FOR MINE
Description : PLUG FOR FIRING DEVICE 1B FOR MINE()
Specification : PLUG AS PER DRG.NO. CQA(I)393/4 FOR DEVICE FIRING 1B FOR MINE
C
Estab
2) SCREW SPECIAL AS PER DRG NO CQA I 393 7 CAT PT NO 5305 016656 FOR FIRING DEVICE IB
Description : SCREW SPECIAL AS PER DRG NO CQA I 393 7 CAT PT NO 5305 016656 FOR FIRING DEVICE IB()
Specification : SCREW SPECIAL AS PER DRG.NO.CQA(I)-393/7, CAT/PT NO.5305-016656 FOR DEVICE FIRING IB
C
Estab
Category : p
Grade : 3
Size :
S
30
KIRTI TRADERS
235 - 236, MAJESTIC SHOPPING CENTRE, 2ND FLOOR 144, J. S. S. ROAD, CHARNI ROAD MUMBAI Maharashtra
PIN1 : 400004
Phone No. : 23808568 GSTIN :
27AAAPC7734R2ZA
1) LONG CLOTH COTTON WHITE BLEACHED 91 CMS[21](Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani)()
Specification : IS:187-1978 (V.NO. 1) WITH AMENDMENT NO. 1 & 2 OF 1986
R
Estab
2) FLANNELETTE LINING BROWN 142 + -1CM WIDE WITH FIRM SELVAGE[21](Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 174-1983 (2ND REV.)REAFF. 2001 EXCEPT THAT FASTNESS TO
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Equipment Factory
Debarred
Name
Specification
Use
Status
1) Cloth Duck Rip Stop Cotton 610 gms. OG WP 91 cms. wide[21](Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani)()
Specification : IND/TC/0145
R
Estab
2) Drill Cotton White Bleached 91 cms.[21](Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani)()
Specification : IS:177-1977
R
Estab
3) CLOTH DRILL COTTON WHITE BLEACHED 142 CM V.NO 3[21](Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani)()
Specification : IS:177-1989 V.NO.3
R
Estab
4) CLOTH PLAIN WEAVE POLYESTER AND VISCOSE DOPE DYED KHAKI 138 CMS.(Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani) [21]()
Specification : As per requirement & specification
R
Estab
5) CLOTH DUCK COTTON 610 GRM O.G. W.P. 91 CMS. WIDE[21](Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani)()
Specification : IS:1422-1983 (V.NO.2), REAFF. 2000 WITH AMDT. NO. 1 OF APR., 87, AMDT. NO. 2
R
Estab
6) CLOTH COTTON CLOSELY WOVEN 170 GMS. O.G. W.R. 91 CMS.[21](Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani)()
Specification : JSS: 8305-5-2000 VARIETY NO. "A"
R
Estab
7) CLOTH DUCK RIP STOP COTTON 610 GMS O.G. W.P. 135 CMS WIDE[21](Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani)()
Specification : IND/TC/0145
R
Estab
8) COTTON FABRIC S.D. PARA SCOURED 91 CM[21](Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani)()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
9) CLOTH COTTON DOSSUTIE O.G. 91 CMS WIDE[21](Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 179-1977 (V.NO.4) (REAFF. 1997) EDITION 3.5 (1998-05)
R
Estab
10) CLOTH DUCK POLYESTER/COTTON BLENDED RIP STOP OG WP ROT PROOF 91 CM.[21](Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani)()
Specification : IS:13510 -2000 VARIETY I(TABLE 1 OF CLAUSE 5.1)
R
Estab
11) COTTON DOSUTIE WHITE BLEACHED 91 CMS.[21](Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 179-1977 VARIETY NO. 4
R
Estab
12) CLOTH DUCK COTTON 610 GR. SCOURED 91 CM. WIDE.[21](Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 1422-1983(V.NO.2) REAFF. 2000 WITH AMDT.NO.1
R
Estab
13) CLOTH COTTON DOSSUTI SCOURED 91 CM.[21](Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 179-1977 VARIETY NO. 4
R
Estab
14) DUCK POLYESTER / COTTON BLENDED RIP STOP OGWP 91 CMS. WIDE(Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani) VARIETY NO.1 WITH FIRE RETARDANT TREATM[21](Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani)()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
15) DUCK POLYESTER/ COTTON BLENDED, RIP STOP (MADE FROM - RING SPUN YARN) OG WP ROT PROOF, VARIETY NO.1,[21](Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 13510-2000 RING SPUN YARN (V. NO.1) MASS
R
Estab
16) CLOTH DUCK POLYESTER COTTON RIP STOP 425 GMS OG WP 135 CMS[21](Firm is registered as Sole Selling Agent of M/s GBTL Limited, Bhiwani)()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Equipment Factory
Name
Specification
Use
Status
1) FABRIC COTTON CLOSELY WOVEN 305 GRAM DUAL SHADE (WHITE/O.G.) W.R. 91 CM. WIDE[21](Firm is registered as Sole Selling Agent of M/s Sutlej Textiles and Industries Limited)()
Specification : IND/TC/0116(F)
R
Estab
Category :
Grade : Grade III
Size :
L
1Ordnance Equipment Factory
Name
Specification
Use
Status
1) CLOTH DRILL COTTON DISRUPTIVE PATT VAT PRINTED 142 CMS. WIDE[21](Firm is registered as Sole Selling Agent of M/s Sutlej Textiles and Industries Limited)()
Specification : IND/TC/0044 (d) CONFORMING TO VARIETY NO. 3
R
Estab
Category :
Grade : Grade III
Size :
L
1Ordnance Equipment Factory
Name
Specification
Use
Status
1) Drill Cotton Disruptive Pattern VAT Printed Mineral khaki 142 cms[21](Firm is registered as Sole Selling Agent of M/s Sutlej Textiles and Industries Limited)()
Specification : IND/ME/975(Prov)
R
Estab
Category :
Grade : Grade III
Size :
L
1Ordnance Equipment Factory
Name
Specification
Use
Status
1) Cloth Cotton Closely Woven 235 gms. Dual Shade (OG/ White) WR 91 cms.[21](Firm is registered as Sole Selling Agent of M/s Sutlej Textiles and Industries Limited)()
2) CLOTH COTTON CLOSELY WOVEN 170 GMS. DUAL SHADE (OG/WHITE) WR 91 CMS.[21](Firm is registered as Sole Selling Agent of M/s Sutlej Textiles and Industries Limited)()
Specification : JSS: 8305-5-2000 (FIRST REVISION)
R
Estab
3) CLOTH DUCK COTTON 610 GMS DUAL SHADE (O.G./WHITE) WP RP 91 CMS[21](Firm is registered as Sole Selling Agent of M/s Sutlej Textiles and Industries Limited)()
Specification : IS:1422-1983 V.NO. 2 EXCEPT THAT
R
Estab
Category :
Grade : Grade III
Size :
L
1Ordnance Equipment Factory
Debarred
Name
Specification
Use
Status
1) CLOTH CALICO COTTON WHITE BLEACHED 91 CM.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 1544-1973 (Ist REV.) (REAFF.1997), EDITION 2.3 (1993-02)
R
Estab
2) CLOTH CANVAS COTTON 680 GMS. O.G. WP 91 CMS.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 1424-1983 (V.NO.2) REAFMD. 1995 & WATERPROOFNESS TO IS: 6803
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Equipment Factory
Debarred
Name
Specification
Use
Status
1) Cloth Cotton Dosuti Green 91 cms. wide[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
2) CLOTH COTTON CANVAS 410 GMS. KHAKI 91 CM.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 1424-1983 VARIETY NO.4 duly flame proofed
R
Estab
3) FABRIC COTTON MINERAL KHAKI WATER REPELLENT FOR CAPE WATER PROOF 135 CMS WIDE[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 2422-1985 WITH AMENDMENT NO. 1 & 2 OF AUGUST 1995 V.NO.1
R
Estab
4) CLOTH COTTON DOSSUTI BLUE 91 CMS[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 179-1977 VARIETY NO. 4
R
Estab
5) CLOTH DUCK POLYESTER COTTON RIP STOP 425 GMS OG WP 135 CMS[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : AS PER REQUIREMENT AND SPECIFICATION
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Equipment Factory
Debarred
Name
Specification
Use
Status
1) CLOTH COTTON 375 GRM. SCOURED W.R. FOR CAPES 91 CMS. WIDE[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS:2422-1985 (REAFFIRMED 1999) WITH AMENDMENT NO.1 OF AUG., 95
R
Estab
2) CLOTH PLAIN WEAVE POLYESTER AND VISCOSE DOPE DYED KHAKI 138 CMS.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : As per requirement & specification
R
Estab
3) CLOTH DUCK COTTON 475 GMS SCOURED W.P. RP 91 CMS[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS:1422-1983 V. NO. 3 WATER PROOFNESS TO IS:6803 LATEST
R
Estab
4) CLOTH COTTON O.G. W.R. 375 GMS. FOR CAPES 76 CMS.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 2422 & MODIFICATION AS PER ANNEX. "A"
R
Estab
5) CLOTH DUCK COTTON 340 GMS O.G. WP 91 CMS.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 1422-1983 (V.NO.4) AND WATER PROOFNESS TO IS: 6803-1972
R
Estab
6) CLOTH DUCK COTTON 475 GRM. BLACK W.P, R.P. (VAT DYED) 91 CMS.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 1422-1983 V.NO.3 WATER PROOFNESS TO IS: 6803 LATEST EXCEPT
R
Estab
7) CLOTH COTTON MINERAL KHAKI WATER REPELLENT FOR CAPE WATER PROOF 90 CM[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 2422-1985 WITH AMENDMENT NO.1&2 OF AUGUST 95 (V.NO.1)
R
Estab
8) CLOTH DUCK COTTON 475 O.G W.P. AND RP 91 CMS.[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : AS PER REQUIREMENT & SPECIFICATION
R
Estab
9) CLOTH DUCK COTTON 610 GMS KHAKI W.P. 91 CM[21](Firm is registered as sole selling agent of M/s GBTL Limited, Bhiwani)()
Specification : IS: 1422:1983 V.NO. 2
R
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Equipment Factory
Name
Specification
Use
Status
1) CLOTH CALICO COTTON WHITE 91 CMS[21]()
Specification : IS:5088-1982(V.NO.3)
R
Estab
2) CLOTH CALICO COTTON KHAKI 91 CM.[21]()
Specification : IS: 1544-1973 (Ist REV.) (REAFFIRMED 1997) EDITION 2.3
Specification : DRG. NO ERDL 959 DET. 4 DT 14-09-76
C
Nonestab
2) SQUIB ASSY (EMPTY) FOR PYRO CTG.[60]()
Specification : NASK 856 (PROVISIONAL)
C
Nonestab
3) SET OF PYRO SQUIB OPERATOR II-253ME[6099990159]()
Specification : DRG .NO. NASK--- 1089/1 (PROV.)
C
Nonestab
4) SQUIB PLUG BRIDGED FOR IGNITER[6099990231]()
Specification : DRG. NO. ERDL,1164 DET. 2
C
Nonestab
5) COMPONENTS FOR SQUIB PSQ 6[6099990236]()
Specification : 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG. NO. PTA-L-54-01-01-103-X
C
Nonestab
6) BRIDGED SQUIB[6099990414]()
Specification : DRG. NO. ERDL; 1320 DET. NO. 5. FOR SAM 5B-87 DT. 09.10.98
Specification : DRG.NO. MD SK 1208/7 DT.14.12.1964.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6571856109 BOX M-32A(WOOD)PT NO 548A(MINEAP1B)[65]()
Specification : SPECN.NO.IA 948(AK)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774200 PACKING BOX FOR SHAPED CHARGE 145MM[65]()
Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
2) 6576773800 PACKING BOX FOR MODULAR CHARGE 350G[65]()
Specification : QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6191700063 PACKING BOX FOR ASSY OF PINAKA RKT[61]()
Specification : PACKING BOX FOR ASSEMBLY OF PINAKA ROCKET ACCESSORIES TO ARDE DRAWING NO 8603 02 04 00 000 00 DA
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6454000052 SQUIB HOUSING EMPTY TO ERDL DRG1295[64]()
Specification : HEMRL/PYRO/PS/207(C)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6519000002 CONTAINER 47B (PLASTIC) FOR FZ 117[65]()
Specification : AMMN CONTAINER 47B.DES.REF. CIA/AMN/2483, PT.NO.ISV-515A DC-36647-A,CONSISTING OF (1) BODY TO PT.NO.ISV 1769 2)LID PT.NO.ISV 1770 (3) RING PT.NO.ISV 1771 (4) DISC DIA 28 X 7.5 + - 0.5 THICK CAPCELL.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6570963298 BOX S 9 WOOD FOR 140MM HE ROCKET[65]()
Specification : BOX S-9 WOOD TO HOLD-2, 140MM HE FRAGMENTATION ROTARY ROCKET PLGD DRAWING NUMBER NAI(V)-5502(P).
C
Nonestab
2) 6576774400 PACKING BOX FOR CUTTING CHARGE 100M[65]()
Specification : PACKING BOX (SUB ASSLY) FOR CUTTING CHARGE 100 MM (EMPTY) TO DRG.NO.HE/CAST/080 DET.1 TO 17 & QAP NO.HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576773700 PACKING BOX FOR MODULAR CHARGE 220G[65]()
Specification : PACKING BOX FOR MODULAR CHARGE 220G COMPRISING OF 5 ITEMS TO DRG. NO. HE/CAST 077 DET 1 TO 5 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
2) 6576773900 PACKING BOX FOR SHAPED CHARGE 30MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 30MM COMPRISING OF 6 ITEMS TODRG. NO. HE/CAST 084 DET 1 TO 6 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576774000 PACKING BOX FOR SHAPED CHARGE 60 MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 60 MM COMPRISING OF 8 ITEMS TO DRG NO. HE/CAST 085 DET 1 TO 8 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
2) 6576774100 PACKING BOX FOR SHAPED CHARGE 90 MM[65]()
Specification : PACKING BOX FOR SHAPED CHARGE 90 MM COMPRISING OF 10 COMPONENTS TO DRG NO. HE/CAST 086 1 TO 10 EXCLUDING 90 MM CHARGE & SET OF LEGS) & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330685101 L T SQUIB PLUG BRIDGED TO DRG 563[63]()
Specification : L.T.SQUIB BRIDGED TO DRG NO.ERDL 563 DETAIL NO. 6 & 7 ( 7- STRAND TINNED COPPER WIRE TO DEF STANDARD -61-12 PART 6/ISSUE 4 WILL BW SUPPLIED BY OFCH)
C
Nonestab
2) 6454000050 L T AQUIB PLUG TO ERDL DRG NO 563[64]()
Specification : L.T SQUIB PLUG TO ERDL DRG NO.563DETAILNO.7
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) BOX WOOD TO HOLD 5 FUZES TIME K 3 M[65]()
Specification : DRG. NO. NAI(V) 8324 (PROV.)
C
Nonestab
2) BOX B 201 MK I[6570091000]()
Specification : DRG. NO. ARM 1477C
C
Nonestab
3) BOX M20C(WOOD) TO DRG PT.NO.ISV 546[6570522016]()
Specification : DRG.NO. CQA(A)/AMN/ST/365
C
Nonestab
4) BOX NO.279 MK1 TO HOLD 40 DETONATER[6575550001]()
Specification : DRG.NO. ARM 1466 D1 BASED ON DD(L) 8008
C
Nonestab
5) BOX WOOD PKG TO DRG.AFK/SK-2823[6580230800]()
Specification : DRG NO. AFK/SK - 2823
C
Nonestab
6) BOX WOOD NO :- S-5 MK-1(IN)[65]()
Specification : DRG. NO.ARDE-2055 SHT NO.03
C
Nonestab
7) AMMUNITION CONTAINER M31-A,CQA/AMN/2870[99]()
Specification : DRG NO CQA(A)/AMMN./ 2870 PART NO. ISV 547 A
C
Nonestab
8) BOX W 123 MK2 DESIGNER'S REF IA 882[65]()
Specification : IA 948 (a,k) DC 36868-A.
C
Nonestab
9) BOX S-12 WOOD FOR FUZE YDB-60[65]()
Specification : DRG.NO.NAI(V)5508 WITH 1)TIN LINER(EMPTY)TO DRG.NO.NAI(V)-5509/1,QTY-2NOS.2)PACKING PIECE-I,ASSY.TO DRG NO.NAI(V)-5509/2QTY-4NOS. 3)PACKING PIECE-II TO DRG.NO.NAI (V)-5509/3, QTY-4NOS. & 4)PACKING PIECE TO DRG.NO.NAI(V)- 5510/1, QTY-1NOS.
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) SQUIB ASSY.EMPTY DRG.NO.ERDL 959[6482720100]()
Specification : DRG. NO ERDL 959 DET. 4 DT 14-09-76
C
Nonestab
2) SQUIB ASSY (EMPTY) FOR PYRO CTG.[60]()
Specification : NASK 856 (PROVISIONAL)
C
Nonestab
3) SET OF PYRO SQUIB OPERATOR II-253ME[6099990159]()
Specification : DRG .NO. NASK--- 1089/1 (PROV.)
C
Nonestab
4) SQUIB PLUG BRIDGED FOR IGNITER[6099990231]()
Specification : DRG. NO. ERDL,1164 DET. 2
C
Nonestab
5) COMPONENTS FOR SQUIB PSQ 6[6099990236]()
Specification : 1) HOUSING FOR SQUIB DRG NO PTA-L-54-01-01-102-X DT.23.2.98 2) CERAMIC BASE FOR SQUIB DRG PTA-L-54-01-01-104-X DT.23.2.98 3) SLEEVE FOR SQUIB DRG. NO. PTA-L-54-01-01-103-X
C
Nonestab
6) BRIDGED SQUIB[6099990414]()
Specification : DRG. NO. ERDL; 1320 DET. NO. 5. FOR SAM 5B-87 DT. 09.10.98
1) PRIMER ELECTRIC IA_/L/EMPTY TO CQA (A) DRG.PART[62]()
Specification : PRIMER ELECTRIC IA_/L/EMPTY TO CQA (A) DRG.PART NO.IQX 46GE, DC NO.36662-A, DT.23.03.2000.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CAP CONDUCTING COMPOSITION[62]()
Specification : CAP CONDUCTING COMPOSITION (EMPTY) TO DESIGNER REF NO.1A4167,ITEM LIST FOR QX-115A AND PART NO QX-115A TO DC NO 36230-A DTD.29.01.1997 FOR PRIMER 1 A/L
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CUP FOR KB 3B DETONATOR EMPTY[65]()
Specification : CUP FOR KB 3B DETONATOR_ EMPTY TO DRG NO. 3_076960/A3-KB-003/1 DCI 37271 A DT. 08.11.2010.
C
Nonestab
2) CAP FOR KB 3B DETONATOR EMPTY TO DRG[65]()
Specification : CAP FOR KB 3B DETONATOR EMPTY TO DRG NO 3-076960/A3-KB-003/2, DCI NO. 37271-A DT. 08.11.10.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) DISC TO DRG.NO.2-013535[62]()
Specification : DISC TO DRG.NO.2-013535/53-00-482M/14, DC NO.36785-A, DT.08.10.2001.
Specification : CAP KG-4 FOR A30-T DETONATOR TO DRG FOR PRIMER DETONATOR A-30-T,NO.CQA(A)/AMN/2857, DC NO 37271-A DT 08.11.10
C
Nonestab
2) PRIMER ELECTRIC NO N30MK1 EMPTY[62]()
ERDL DRG 971, DET NO.1ARD NO-2374 DT.31.01.08 SPECIFICATION:ERDL/PYRO/PS-152(a) CONSISTING OF(01)BODY TO DRG NO.NAD 1589/1/1 ARD-2371 DT.24.07.07(QTY 01 NO.), (02) CONTACT BOLT: ERDL DRG 971 DET NO.3ARD-2403 DT.19.04.10(QTY-01 NO.),(03)PRIMER MAGAZINE CU
C
Nonestab
3) CUP YA 5 FOR A30 T DET[65]()
Specification : CUP YA-5 FOR A30-T (DET) TO DRG.NO. FOR PRIMER A-30-T CQA(A)/AMN/2856 DC NO. 37271-A, DT.08.11.10 SCANNED ON DT.05.01.2011.
C
Nonestab
4) CAP TO DRG NO ARM 1172 A26 6221020012[62]()
Specification : CAP TO DRG. NO.ARM 1172 A26 DT. 24-11-79.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6454000051 SQUIB PLG BRIDGED TO ERDL DRG 1096[64]()
Specification : HEMRL/PYRO/PS/207(C).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1410052010 CUP AND CAP FOR FUZE B429E[14]()
Specification : CUP & CAP FOR MAGAZINE TO DRG. NO. PROP/SK-443 FOR RECTIFICATION OF FUZE B-429E.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6454000053 SLIDER ASSEMBLY TO ERDL DRG 1287 DET[64]()
Specification : HEMRL/PYRO/PS/207(C).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6333800330 PLUG WITH FILAMENT BRIDGE BUSHING[63]()
Specification : PLUG TO DRG. PART NO. IQX 975 & BUSHING TO DRG. PART NO.IQX 976 TO DESIGNERS REF. OST-B 84-409-79.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6192228146 DETONATOR HOLDER ARDE 1146 DET 21[61]()
Specification : DETONATOR HOLDER TO DRG. NO. ARDE-1146 DETAIL NO. 21 AL. NO.312 DT. 13-9-1977 FOR ROCKET 68 MM HE.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6078000600 CAP CONDUCTING COMP EMPTY 105MM TK SH[60]()
Specification : CAP CONDUCTING COMPOSITION EMPTY DRG PART NO. QX-115 A DC.NO.36230-A DATED 29-01-97 SPEC NO. L 10155 A (B) DC NO. 31887-A DATED 12-03-76
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6419000014 PLUG TO DRG.NO ISX-393 FOR 125MM HE[64]()
Specification : PLUG (PLASTIC)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6141701400 CONNECTR NO 3981 FOR MINE AP 1A DIR[61]()
Specification : CONNECTOR NO. CA 3981 FOR DETONATOR CABLE ELECTRIC 1B/L TO DRG. PART NO. IQX 165 GF DC NO. 36953-A DT.10-03-04 ANDPVC SLEEVE INTERNAL DIAMETER 3.00 MM AND LENGTH 25 TO 30 MM
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6576763203 CONTAINER 66 A[65]()
Specification : CQA(A) 2805 (H)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6192229966 PLUG SEALING RUB FOR RKT 68MM HE HC P[61]()
Specification : SEALING PLUG (RUBBER) TO DRG.NO. ARDE-1135 DET.NO. 2 AL.NO. 21/94 DT. 12-10-1994 FOR ROCKET 68 MM HE/HC/PRACTICE.
C
Nonestab
2) 6143102151 RING NYLON TO DRG NO ISX 426[61]()
Specification : NYLON RING TO DRG.PART NO. ISX 426 DC NO. 36342-A FOR SHELL, 130 MM, HE, 1B PLUGGED FILLED ASSY.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6078000021 ELECTRIC BRIDGE WIRE CAP FOR FSAPDS[60]()
Specification : ELECTRIC BRIDGE WIRE CAP FOR PRIMER OF 120 MM AMMUNITION TODRAWING NO. HEMRL/PYRO/H/SK.021NOTE- THE RESISTANCE OF EACH EMPTY CAP SHOULD BE 1.5 OHM+ / - 0.3 OHM I.E. FROM 1.2 OHM TO 1.8 OHM
C
Nonestab
2) 6330301100 DETONATOR HOLDER FOR SHAPED CHARGE 30MM[63]()
Specification : DETONATOR HOLDER TO DRG. NO. HE/CAST 012 DET 5 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6504300006 RETAINER[65]()
Specification : RETAINER TO DRG. NO. 9102 00 01 00 01 003 00TB FOR 30 MM GRENADE RUDRA AGS-17
C
Nonestab
2) 6330901300 LINER FOR SHAPED CHARGE 90 MM TO DRG NO HE CAST 018 DET 3 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]()
Specification : LINER FOR SHAPED CHARGE 90 MM TO DRG. NO. HE/CAST/018 DET 3& QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008.
C
Nonestab
3) 6330901100 DETONATOR HOLDER FOR SHAPED CHARGE 90 MM TO DRG NO HE CAST 018 DET 5 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]()
Specification : DETONATOR HOLDER FOR SHAPED CHARGE 90 MM TO DRG. NO. HE/CAST/018 DET. 5 & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF 09/2008.
C
Nonestab
4) 6330901000 SHAPED CHARGE 90 MM E ASSY CONSISTING OF 2 COMPONENTS TODRG NO HE CAST 018 DET 2 AND DET 4 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]()
Specification : SHAPED CHARGE 90 MM (E.ASSY) CONSISTING OF 2 COMPONENTS TODRG. NO. HE/CAST 018 DET 2 & DET 4 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
5) 6454000058 SQUIB PLUG BRIDGED EMPTY FOR CONTAINER CLEANING CHARGE TODRAWING NO ARDE 9707 00 01 1718 000 00TA FOR INFLUENCE MINEMK II FILLING AND ASSEMBLY[64]()
Specification : SQUIB PLUG (BRIDGED)(EMPTY) FOR CONTAINER CLEANING CHARGE TODRAWING NO.ARDE 9707 00 01 1718 000 00TA FOR INFLUENCE MINEMK-II-FILLING AND ASSEMBLY.
C
Nonestab
6) 6331451300 DETONATOR HOLDER TO DRG NO HE CAST 022 DET 5 QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008 FOR SHAPED CHARGE145 MM[63]()
Specification : DETONATOR HOLDER TO DRG.NO. HE/CAST 022 DET.5 & QAP NO.HEMRL/HE/ADD/08/01 REV.00 OF 09/2008, FOR SHAPED CHARGE145 MM.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6584113900 CONTAINER 39A[65]()
Specification : SPECN. NO. CQA(A) 2805
C
Nonestab
2) 6580853267 CONTAINER 63A ISV 506A[65]()
Specification : AMMUNITION CONTAINER 63A DRG.PT.NO.ISV 506-A DC NO.36166-A
C
Nonestab
3) 6433055491 NOSE ADAPTOR TO DRG PT NO ITV-19[64]()
Specification : NOSE ADAPTER TO DRG.PT.NO.ITV-19 FOR BOMB 120 MM HE DC 36749-A
5) COMPONENTS FOR CARTG. 40MM MGL AMN[6099999032]()
Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP
Specification : 1) CSE PRI. DRG. ARDE: 1460/1 CASE,WASHER & DISC, RING SEALING, DISC 2) CSE SEC. ARDE:1765/1 CUP & SUPPORT, COVER & DISC, RING SEALING 3) CSE DROGUE DRG. ARDE 1657/1-CASE,DISC, WASHER
C
Nonestab
3) COMPONENTS FOR CARTG. 40MM MGL AMN[60]()
Specification : (1) CASE TO DRG NO. AFK/ SK-206-05 (2)BASE PLUG TO DRG NO. AFK/SK-210-05 (3)INSERT TO DRG NO. AFK/SK-209-05 (4) SKIRT TO DRG NO. AFK/SK-207-05 & CUP
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) PLASTIC INDEX DISC FOR CARTG. SA 12 BORE 65/70 MM TO DRG. NO. AFK/SK-2888 DT. 17/01/2007[60]()
1) CCJ CLAM EMPTY ASSEMBLY SET CONSISTING OF 06 COMPONENTS[60]()
Specification : AS PER SPECN.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) MOULDING OF PRIMER BODY and CONTACT LF 9911349627
Description : MOULDING OF PRIMER BODY and CONTACT LF 9911349627()
Specification : MOULDING OF PRIMER BODY TO DRG NO.NAD-1589/1/1 R.NO. NIL DT.24-7-07. CONTACT BOLT TO DRG. NO. ERDL DRG.971 DET.NO.3 DT.19-04-10 WITH GLASS FILLED PHENOLIC RESIN TO SPECN: JSS-9330-05:2012(REVISION NO-1) DC NO.5091-ME DT 21/8/2012 AS ERDLD
C
Nonestab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) PHENOLIC MOULDING OF BODY CONTACT LF 9911356304
Description : PHENOLIC MOULDING OF BODY CONTACT LF 9911356304()
Specification : PHENOLIC MOULDING FOR BODY & CONTACT TO DRG NO:OST-B84-410- 78 MOULDED COMPONENTS TO SATISFY PARAMETER OF TESTING ATSHEET NO: 4,5 & 6 OF OST-B84-410:78 MOULDING MATERIAL TOSPECN:- SP-16 OF IPL.
26) THREADED BOSS M10X18MMX18MM
Description : THREADED BOSS M10X18MMX18MM()
Specification : THREADED BOSS M10 X 18MM (OD) X18MM LENGTH FULL THREADED MATERIAL :IS:9550 GR-2, 20C8
C
Estab
27) THREADED BOSS M10 X 18 X 18MM()
Specification : THREADED BOSS M10 X 18 X 18MM (L.F. No.-9013193479000)
C
Estab
28) THREADED BOSS M10 X 20MM OD X 30MM
Description : THREADED BOSS M10 X 20MM OD X 30MM()
Specification : THREADED BOSS M10 X 20MM (OD) X 30MM LENGTH TO DRG NO.: 218-03-1089/9
C
Estab
29) THREADED BOSS M12 X 1 point 75 X OD 20 X 20L
Description : THREADED BOSS M12 X 1 point 75 X OD 20 X 20L()
Specification : THREADED BOSS M12 X 1.75 X OD 20 X 20L FULLY THREADED MATERIAL- IS:9550 GR-2 20 C8
C
Estab
30) THREADED BOSS M12X 1 point 75 X OD 20X60 MM
Description : THREADED BOSS M12X 1 point 75 X OD 20X60 MM()
Specification : THREADED BOSS M12X1.75X OD 20X60 MM LENGTH MATERIAL : M.S.
C
Estab
31) THREADED BOSS M12 X 20MM OD X30MM
Description : THREADED BOSS M12 X 20MM OD X30MM()
Specification : THREADED BOSS M12 X 20MM (OD) X30MM LENGTH TO DRG NO.:218-03-1089/7
C
Estab
32) THREADED BOSS M6 X 12MM OD X12MM
Description : THREADED BOSS M6 X 12MM OD X12MM()
Specification : THREADED BOSS M6 X 12MM (OD) X12MM LENGTH TO DRG NO.218-03-1089/2
C
Estab
33) THREADED BOSS M6 12MM 16MM
Description : THREADED BOSS M6 12MM 16MM()
Specification : THREADED BOSS M6X12MMX16MM
C
Estab
34) THREADED BOSS M8 X 16MM OD X12MM
Description : THREADED BOSS M8 X 16MM OD X12MM()
Specification : THREADED BOSS M8 X 16MM (OD) X12MM LENGTH
C
Estab
35) THREADED BOSS M8 X 16MM OD X25MM
Description : THREADED BOSS M8 X 16MM OD X25MM()
Specification : THREADED BOSS M8 X 16MM (OD)X25MM LENGTH
C
Estab
36) THREADED BOSS M8 X 16MM OD X40MM
Description : THREADED BOSS M8 X 16MM OD X40MM()
Specification : THREADED BOSS M8 X 16MM (OD)X40MM LENGTH TO DRG NO.:218-03-1089/8
C
Estab
Category : dp
Grade : 3
Size :
S
1Gun and Shell Factory
[ENR Registration]
Name
Specification
Use
Status
1) BOLT TO DRG No M10 8G X 55 109 40 X 029 IN FINISHED CONDITION
Description : BOLT TO DRG No M10 8G X 55 109 40 X 029 IN FINISHED CONDITION()
Specification : BOLT TO DRG No. M10 - 8G X 55.109.40 X .029 IN FINISHED CONDITION
C
Estab
2) SCREW TO DRG No M4 6GX6 point 33 H 026 IN FINISHED CONDITION
Description : SCREW TO DRG No M4 6GX6 point 33 H 026 IN FINISHED CONDITION()
Specification : SCREW TO DRG. No. M4-6GX6.33 H 026 IN FINISHED CONDITION
C
Estab
3) BOLN TO DRG No BOLT M10 8G X 55 109 40 X 029 IN FINISHED CONDITION
Description : BOLN TO DRG No BOLT M10 8G X 55 109 40 X 029 IN FINISHED CONDITION()
Specification : BOLN TO DRG. No. BOLT M10 - 8G X 55.109.40 X .029 IN FINISHED CONDITION
C
Estab
4) RING GOST 13943 86 V55
Description : RING GOST 13943 86 V55()
Specification : RING TO DRG. No. GOST 13943-86 V558 IN FINISHED CONDITION
C
Estab
5) THREADED BUSH TO DRG No 9 A 621 08 015
Description : THREADED BUSH TO DRG No 9 A 621 08 015()
Specification : THREADED BUSH TO DRG. No. 9-A-621.08.015
C
Estab
6) BUSH GOST 1050 88
Description : BUSH GOST 1050 88()
Specification : BUSH (AK-630.101.24) STEEL-5, GOST : 1050-88
8) SECTOR RIM ( AK 630 101.26) FORGING TO DR TO SPECN ALLOY A MG6.GOST: 4784-97
Description : SECTOR RIM ( AK 630 101.26) FORGING TO DR TO SPECN ALLOY A MG6.GOST: 4784-97()
Specification : AS PER DRG. & SPECIFICATION
C
Estab
9) BOLT 2 M10 8g X 50 109 40 X 029 GOST 7798 70
Description : BOLT 2 M10 8g X 50 109 40 X 029 GOST 7798 70()
Specification : BOLT .2 M10 - 8g X 50.109.40 X .029 GOST : 7798-70
C
Estab
10) BOLT 2 M10 8g X 40 109 40 X 029 GOST 7798 70
Description : BOLT 2 M10 8g X 40 109 40 X 029 GOST 7798 70()
Specification : BOLT .2 M10 - 8g X 40.109.40 X .209 GOST : 7798-70
23) BOLT TO SPECIFICATION M8 8G X 75 109 40 X 029
Description : BOLT TO SPECIFICATION M8 8G X 75 109 40 X 029()
Specification : BOLT TO SPECIFICATION M8-8G X 75.109.40 X .029
C
Estab
24) RIB 102 68
Description : RIB 102 68()
Specification : RIB TO DRG. No. AK-630 102-68 IN FINISHED CONDITION
C
Estab
25) RIB 102 69
Description : RIB 102 69()
Specification : RIB TO DRG. No. AK-630 102-69 IN FINISHED CONDITION
C
Estab
Category : ddp
Grade : 3
Size :
S
1Gun and Shell Factory
[Deemed Registration]
Name
Specification
Use
Status
1) SET OF PARTS FOR ERECTION FOR AK 630 GUN WITH ALTERNATE MATERIAL 28 MECHANICAL ITEMS AS PER ATTACHED LIST
Description : SET OF PARTS FOR ERECTION FOR AK 630 GUN WITH ALTERNATE MATERIAL 28 MECHANICAL ITEMS AS PER ATTACHED LIST()
Specification : AS PER DRAWING
R
Nonestab
Category : ddp
Grade : 3
Size :
S
36
M/s SWAN ENTERPRISES PVT. LTD.
49 & 50, SIDCO INDUSTRIAL ESTATE GUMMIDIPOONDI, CHENNAI TAMIL NADU
PIN1 : 601201
Phone No. : 044-27922687
Specification : PYRO DELAY TUBE EMPTY TO DRG.NO.Khs-2-2-0406(a)
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) NOSE FUZE TYPE A 670M (EMPTY) FOR30MM BMP-II AMMN()
CQA(A) DRG.NO.bw.3.140.039.cb/c,DC-34241 -A,DT.24.9.87(IN LOOSLY ASSEMBLED CONDITION) CONSISTING OFVARIOUS COMPONENTS AS PER ENCLOSED LIST(PASSED PROOF). PROGRAMME AND TEST PROCEDURE AS PER ALBUM NO. D-2040,SHEETNO.Bw.3.140.039 II M/c (12 SHEETS) DC-3424
C
Not Estab
2) TOP PLUG()
OFAJ DRG.NO:S-78C (REF. DRG.NO.4079922,DC NO.36817-A,DT.08.03.2002,DULY SURFACETREATED AS PER DRG.NO.5191819,DC NO.34810-A, DT.05.03.90(PRF FOR 155MM M-107 & M77B )
C
Not Estab
Category : P
Grade : II
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CAP CONDUCTING COMPOSITION[62]()
Specification : CAP CONDUCTING COMPOSITION (EMPTY) TO DESIGNER REF NO.1A4167,PART NO QX-115A TO DC NO 36230-A DTD.29.01.1997 FOR PRIMER 1 A/L
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CAP FOR KB 3B DETONATOR EMPTY TO DRG[65]()
Specification : CAP FOR KB 3B DETONATOR EMPTY TO DRG NO 3-076960/A3-KB-003/2, DC NO 37271-A DT08.11.10
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) DISC TO DRG 6281000130()
DISC TO DRG 6281000130, DC NO.-36490-A, DT-19.11.98
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12[62]()
Specification : BODY WITH BAND [FOR 30MM AP(T)] TO DRG.NO.bw 5.500.113/C,DC NO.37321-A,DT-18.10.12 [USING WITH BODY (ALTERNATIVE) TO DRG.NO.bW 8.035.085/C SHEET 3 & 4 DC NO.34640-A,DT-9.6.89]. REF:(1) BODY WITH ASSY. DRAWING bW 5.500.113 Cb/c DC(1)-3
R
Nonestab
2) FUZE PERCUSSION DA NO.117 (EMPTY) MK.20 WITH CAP TO DESIGNERS REF NO.L5/10744/GE/341, PART NO:[62]()
Specification : FUZE PERCUSSION DA NO.117 (EMPTY) MK.20 WITH CAP TO DESIGNERS REF NO.L5/10744/GE/341, PART NO: QX-244 GE,DC NO. 31398-A,DT.10.02.75. (REF.DRG.FUZE PERCUSSION DA NO.117 EMPTY MK 20 ITEM LIST FOR QX 244 GE DCI-31398-A DT.10.02.75)
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CAP KG 4 FOR A30 T DETONATOR[65]()
Specification : CAP KG-4 FOR A30-T DETONATOR TO DRG FOR PRIMER DETONATOR A-30-T,NO.CQA(A)/AMN/2857, DC NO 37271-A DT 08.11.10
5) Pin fixing barrel Drg. No. PH-1-9 in finished condn.()
AS PER DRG.
C
Not Estab.
Category : P
Grade : III
Size :
M
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6331800100 FUZE PERCN DA 162 MK8(M2)EMPTY[63]()
Specification : SPECN. NO. CQA(A) 0917
C
Nonestab
2) 6331800200 FUZE PERCN DA NO 162 MK-9(M-1)EMPTY[63]()
Specification : SPECN.NO. CQA(A) 0917
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6431826719 CUP & BASE DETONATOR HOLDER 560 MG[64]()
Specification : CUP DETONATOR HOLDER & BASE DETONATOR HOLDER FOR DET. 560 MG FOR MINE APERS M-14.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330130100 FZ 117 DA MK 20 E WITH CAP[63]()
Specification : IA 1204 (LATEST ISSUE), DULY ACCEPTED IN PROOF AS PER CQA(A) PROOF SCHEDULE NO. CQA(A)/PS/ FZ/92/4 AND PROOF SCHEDULE NO. CQA (A)/PS/FZ/93/3.
C
Nonestab
2) 1410052010 CUP AND CAP FOR FUZE B429E[14]()
Specification : CUP & CAP FOR MAGAZINE TO DRG. NO. PROP/SK-443 FOR RECTIFICATION OF FUZE B-429E.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6332299004 FUZE NT GAINE 1A[63]()
Specification : GAINE 1A EMPTY TO DRG.PART NO.IQX 58 GE DC NO.34637-A.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6331800294 SLEEVE B FOR FUZE 162 MK 8[63]()
Specification : SLEEVE "B" TO DRAWING NUMBER PROP/SK-294 FOR PACKING OF FUZE162 MK-8 AND MK-9.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330604970 PLUG REPRESENTING FUZE B429[63]()
Specification : PLUG, REPRESENTING, FUZE B 429, B TO DRG. PART NO. ISX 266 DC 35494-A.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6491338958 PLUG FUZE HOLE 35 MM FOR 81 MM HE[64]()
Specification : PLUG,FUZE HOLE,35 MM NO.6,DESIGNER REF. CIA/AMN/2125 PART NO.ITV 95 DC NO.36172-A.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6356000012 EMPTY ASSY OF DETONATOR ELECTRIC CONSISTING OF A DETONATOR TUBE ARDE DRG NO 9707 00 01 01 05 001 00TAB SQUIB PLUG EMPTY ARDE DRG NO 9707 00 01 05 19 000 00TAC PROTECTIVE CAP FOR SQUIB PLUG DETONATOR ARDE DRG NO 970700 01 17 19 001 00TA[63]()
Specification : RIVET TO DESIGNERS REF.ARDE-1521 DET NO.6 DRG.PT.NO. ITX-239 DC 35824-A
C
Nonestab
2) 6454000053 SLIDER ASSEMBLY TO ERDL DRG 1287 DET[64]()
Specification : HEMRL/PYRO/PS/207(C).
C
Nonestab
3) 6454000052 SQUIB HOUSING EMPTY TO ERDL DRG1295[64]()
Specification : HEMRL/PYRO/PS/207(C)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6575000010 CYLINDER NO 239 FOR FZ 24A RKT 68 MM[65]()
Specification : CYLINDER NO 239 TO DGAQA DRG NO ARM 1515 C1 FOR PACKAGES OF FUZE 24 A 68 MM ROCKET
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6419000075 DETONATING DEVICE FOR FZ B15 EMPTY[64]()
Specification : DETONATING DEVICE FOR FZ. B15(EMPTY)TO 3-024045,DRG.NO.IQX-73 GE(WITHOUT SUB.ASSY.CD-2.2 & SED(3X1)CONST.OF(1)SUB.ASSY.CD-2.9(2)SUB.ASSY.CD-2.1(3)SUB.ASSY.TO DET 2.21(4)CONTACT TODET 2.12(5)NUT TO DET 2.16(6)LOOSE COMPONENTS CAP TO DET 2.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330685102 ELECTRIC FUZE UNCHARGED EMPTY[63]()
Specification : ELECTRIC FUZE UNCHARGED ( EMPTY) TO DRG NO. 3-027321 CD 8
C
Nonestab
2) 6356000102 FUZE FOR ADRUSHY MINE MK II ASSY[63]()
Specification : FUZE FOR ADRUSHY MINE MK II (ASSY) TO ARDE DRG NO 9707 00 0200 00 000 00TB AND AS PER SCOPE OF WORK
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Gun and Shell Factory
Name
Specification
Use
Status
1) PIN RELEASE IQX-320 IN F/C DC NO. 36997-A DT. 25.01.2005()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
2) FORGED BLANK FOR ILLUMINATING TIME FUZE BODY TO GSF DRG. NO. F-2316A SPECN. IS: 734 GR 24345 WP()
AS PER DRG. & SPECIFICATION
C
NOT ESTAB.
Category : P
Grade : I
Size :
M
1Gun and Shell Factory
Name
Specification
Use
Status
1) SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION[63]()
Specification : SAFETY LOCK ASSY TO DRG. NO. NAI(J)/501/16 IN FINISHED CONDITION
C
Nonestab
2) SPIRAL TO DRG. NO. NAI(J) 501/6/3(P) FOR Fz DASD AK-630[63]()
Specification : NAI(J) 501/6/3(P) FOR Fz DASD AK-630
C
Nonestab
Category : p
Grade : Grade I
Size :
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SHUTTER PLATE TBRL LF NO 9911358300[99]()
Specification : SHUTTER PLATE TO DRG.NO.TBRL/MMG-H/MK1/053/R0
C
Nonestab
2) ARMING PYRO DELAY EMPTY TO DRG LF 9911358385[99]()
Specification : ARMING PYRO DELAY EMPTY TO DRG.NO.Khs-2-2-0405(a)
C
Estab
3) PYRO DELAY TUBE EMPTY LF 9911358384[99]()
Specification : PYRO DELAY TUBE EMPTY TO DRG.NO.Khs-2-2-0406(a)
C
Nonestab
4) WASHER AS PER DRG NO MKTA 754152 003 LF 9911358670[99]()
Specification : WASHER AS PER DRG NO MKTA 754152 003 TRD 1 1 3223
C
Nonestab
5) WASHER AS PER DRG NO TRD 1 1 3223 LF 9911358675[99]()
Specification : WASHER AS PER DRG MKTA 754152 003 TRD 1 1 3223 ALT
C
Nonestab
6) WASHER AS PER DRG NO MKTA 754152 001 LF 9911358668[99]()
Specification : WASHER AS PER DRG NO MKTA 754152.001/TRD 1.1.3221
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6261109200 S D ARMING 6 1 E FOR 105MM TKSH[62]()
Specification : SHUTTER DELAYED ARMING EMPTY NO 6/1 TO DRG.PT.NO.QX-178-A,DC-35465-A,ITEM LIST FOR QX-178-A DC 35465-A DT.4.3.93.SPECN : L-10360(C) DCI-31888-A.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOOSTER CUP & PIN FOR 84MM HEAT-551[99]()
Specification : SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SHELL HEI EMPTY 30MM BMP II LF 9911358129[99]()
Specification : BODY EMPTY WITH BAND ASSY TO DRG NO.bw5.500.009Cb/c 2 SHEETSSHEET-1 DC-37321-A DT 18-10-12 SHEET-2 DC- 34241-ADT.24/09/87 SPECN.PROGRAMME AND METHOD OF TESTING AS PERSHEET NO.5w5.500.112 M/C (5 SHEET) DC-34241-A DT.24-9-87.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) 5TH SET OF 8 ITEMS FOR MMHG L F 9911358528[99]()
Specification : 5th SET OF 8 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.Top Det Holder, TBRL/MMG-H/MK-1/020/R0 2.Magazine Body, TBRL/MMG-H/MK-1/011/R0 3.Cup (Qty-2nos), TBRL/MMG-H/MK-1/022/R0 4.Clapper Spring assembly, TRD-1-1-3148 5.Hand Lever, TBRL/
C
Estab
2) 4th SET OF 3 ITEMS FOR MMHG L F 9911358527[99]()
Specification : 4th SET OF 3 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS.
1.Shutter TBRL/MMG-H/MK-1/027/R2 2.Cup Closing TBRL/MMGH/
MK-1/025/R2 3.Main Hosing TBRL/MMG-H/MK-1/010/R2
C
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BODY ASSY 4 26941 060 FOR 81MM SMK LF 9911355970[99]()
Specification : BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87.
C
Nonestab
2) SHUTTER SPRING TBRL LF NO 9911358297[99]()
Specification : SHUTTER SPRING TO DRG. NO. TBRL/MMG-H/MK1/031/R1
C
Estab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SELF TAPPING SCREW DRG 121932 LF NO 9911357650[99]()
Specification :
R
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SUPPORTING RING TO DRG.NO.TRD222272[99]()
Specification : SUPPORTING RING TO DRG.NO.TRD-2-2-2272.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TRACER BODY DRG NO.F1334-154780-D[99]()
Specification : TRACER BODY TO DRG NO.F-1334-154780-D, DC-36534-A DT.6/3/99
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) STABILIZING TUBE F1301-026223-D[99]()
Specification : STABILIZING TUBE TO DRG NO F-1301-026222-H DC NO.37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CLAPPER PIN ASSY FOR MULTIMODE GR LF 9911357706[99]()
Specification : CLAPPER PIN ASSEMBLY TO DRG NO.TBRL/MMG-H/MK-I/A41/RO.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ADOPTER BUSH TO DRG NO 4 26941 007 Lf 9911358269[99]()
Specification : ADOPTER BUSH TO DRG NO.4-26941-007 DC NO.35878-A DTD. 20.12.94
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BODY ASSY 4 26941 060 FOR 81MM SMK LF 9911355970[99]()
Specification : BODY ASSY TO DRG NO.4-26941-060Cb DC34269-A DT.17-11-87.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) CAP TO DRG NO 9 0643[63]()
Specification : CAP TO DRG.NO.9-0643/9- -104/1,DC.34183-A,DT-28.7.87.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) ADOPTER SCREW TO LF 9911358097[99]()
Specification : ADOPTER SCREW TO DRG.NO.MMG-H/MK-1/051/RO.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) EMPTY FUZE B 25M TO DRG TRD 1778 LF 9911357354[99]()
Specification : EMPTY ASSY.FUZE B-25M TO DRG.NO TRD-1778a ( CONSISTING OF 37 ITEM ) REQD. FOR 140 MM ROCKET
Specification : DISC TO DRG.3-027321-4B2-24, DC NO.36811-A,DT-14.02.2002
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Bolangir
Name
Specification
Use
Status
1) SLEEVE TO DRG FOR 30MM BMPII[63]()
Specification : 6380102072 SLEEVE TO Drg NO.9-04367/9-104/38.316.101 DC- NO. 37514-A
DTD.18.02.19
AS PER DRG./SPECIFICATION
C
Nonestab
2) WASHER TO DRG NO155 1120 DC NO 36792A 6284001025[62]()
Specification : WASHER TO DRG NO.155-1120,DC NO- 36792-A,DT.01.11.2001
C
Nonestab
3) CUP YA 5 FOR A30 T DET[65]()
Specification : CUP YA-5 FOR A30-T (DET) TO DRG.NO. FOR PRIMER A-30-T CQA(A)/AMN/2856,DCNO.37271-A,DT.08.11.10 SCANNED ON DT.05.01.2011.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PLUNGER TO DRG NO TRD 1 1 3147a L F 9911358303[99]()
Specification : PLUNGER TO DRG.NO.TRD-1-1-3147 'a'
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) 1st SET OF 4 ITEMS FOR MMHG LF NO 9911358524
Description : 1st SET OF 4 ITEMS FOR MMHG LF NO 9911358524()
Specification : 1ST SET OF 4 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS.1.Rivet for Top Plate (Qty.-2 NOS.) TBRL/MMG-H/MK-1/016/R0 2.Plunger Spring TBRL/MMG-H/MK-1/029/F0 3.Conical spring (Qty-2nos) TBRL/MMG-H/MK-1/030/R0 4.Safety Pin, TRD-1-1-3047
R
Estab
Category : p
Grade : 3
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) FUZE MINE COMB M605 ASSEMBLY EMPTY[63]()
Specification : CQA(A) 1803
C
Nonestab
Category :
Grade : Grade III
Size :
S
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) CARTG TRG FOR 81MM MOR BOMB3B EMPTY[60]()
Specification : CQA (A) 2348
C
Nonestab
2) FUZE PERCN DA 117 MK20 EMPTY COMPLETE[63]()
Specification : I.A. 1204
C
Nonestab
3) 6381210301 SET OF COMPONENTS FOR PRIMER M191A2[63]()
Specification : SET OF COMPONENTS FOR PRIMER M191 A2 CONSISTING OF PLUNGER, PLUNGER GUIDE, WASHER SEALING, IGNITION ELEMENT AND INNER CASE AS PER ATTACHED ANNEXURE "A"
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ammunition Factory Khadki
Name
Specification
Use
Status
1) 6099999131 SET OF COMPONENTS FOR 30MM MIL 17HE[60]()
Specification : SET OF COMP. CONSISTING OF GRENADE BODY WITH DRIVING BAND (AFK/DEV-07), RETAINER (AFK/DEV-09), TRANSIT PLUG (AFK/DEV-11), TRANSIT RING (AFK/DEV-08), NOTCHED CLOSE COIL (AFK/DEV-12), CARTG. CASE (AFK/DEV-06)
C
Nonestab
Category :
Grade : Grade III
Size :
M
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) HOLDER TO DRG NO IQX 1251 DC34168 A DTD 27 06 87
Description : HOLDER TO DRG NO IQX 1251 DC34168 A DTD 27 06 87()
Specification : HOLDER TO DRG. NO. IQX 1251 DC34168-A DTD.27.06.87
C
Estab
2) PIN TO DRG NO IQX 579 DC 34416 A DTD 29 06 88
Description : PIN TO DRG NO IQX 579 DC 34416 A DTD 29 06 88()
Specification : PIN TO DRG NO. IQX 579 DC 34416-A DTD.29.06.88
C
Estab
3) PIN ALUMINIUM TO DRG NO 3 016919 DET 45 DC 37284 A DT 06 07 11
Description : PIN ALUMINIUM TO DRG NO 3 016919 DET 45 DC 37284 A DT 06 07 11()
Specification : PIN (ALUMINIUM) TO DRG.NO.3-016919 DET-45 DC-37284-ADT.06-07-11
C
Estab
4) WASHER TO CQA(A) DRG NO. BW9.440.047 DC 37271-A
Description : WASHER TO CQA(A) DRG NO. BW9.440.047 DC 37271-A()
Specification : WASHER TO CQA(A) DRG NO. BW9.440.047 DC 37271-A
C
Estab
5) WASHER TO CQA AMMN DRG NO BW 9 440 010 DC 37271 A DT 08 11 2010
Description : WASHER TO CQA AMMN DRG NO BW 9 440 010 DC 37271 A DT 08 11 2010()
Specification : WASHER TO CQA(AMMN.) DRG. NO. BW 9.440.010 DC 37271-A DT. 08.11.2010.
R
Estab
6) SAFETY DEVICE TO CQA A DRG NO 4 024069 DET 2 DC 35212 A DT 12 11 91
Description : SAFETY DEVICE TO CQA A DRG NO 4 024069 DET 2 DC 35212 A DT 12 11 91()
3) Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97
Description : Swivel butt sub Assy. Drg. No. PH-11SA in finished condition D.A. No. 83/97()
Specification : AS PER DRG.
C
Estab
Category : p
Grade : 3
Size :
S
1Ordnance Factory Bolangir
[ENR Registration]
Name
Specification
Use
Status
1) CAP K3-2
Description : CAP K3-2()
Specification : CAP K3-2 (IGNITING PRIMER MG-8) TO DRG. NO. CQA(A)/AMN/2854, DC NO. 37271-A, DT. 08.11.10 SCANNED ON DT. 05.01.11. HEIGHT SHOULD BE FROM 3.05 MM TO 3.15 MM. NOTE:- EDGE SHOULD BE VERY SMOOTH, EQUAL HEIGHTED, NO CROWN & SHAPPING OR BURRS S
C
Estab
2) CUP Y1-3
Description : CUP Y1-3()
Specification : CUP Y1-3 (IGNITING PRIMER MG-8) TO DRG. NO. CQA(A)/AMN/2855, DC NO. 37271-A, DT. 08.11.10. SCANNED ON DT. 05.01.11. HEIGHT SHOULD BE FROM 1.30 MM TO 1.40 MM. OUTSIDE DIAMETER SHOULD BE 2.35 MM TO 2.38 MM. NOTE:- EDGE SHOULD BE VERY SMOOTH
C
Estab
3) CAP FOR KB 3B DETONATOR EMPTY TO DRG
Description : CAP FOR KB 3B DETONATOR EMPTY TO DRG()
Specification : CAP FOR KB 3B DETONATOR EMPTY TO DRG NO 3-076960/A3-KB-003/2, DCI NO 37271-A DT. 08.11.10.
C
Estab
4) CUP FOR KB 3B DETONATOR EMPTY
Description : CUP FOR KB 3B DETONATOR EMPTY()
Specification : CUP FOR KB 3B DETONATOR EMPTY TO DRG NO. 3-076960/A3-KB-003/1 DCI-37271-A DT.08.11.2010.
C
Estab
Category : p
Grade : 3
Size :
S
1Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) DEVELOPMENT OF SAFE AND ARM DEVICE(EMPTY)FOR FUZE FB-40 AS PER SCOPE OF WORK ANNEXURE-A.[71]()
Specification : DEVELOPMENT OF SAFE AND ARM DEVICE(EMPTY)FOR FUZE FB-40 AS PER SCOPE OF WORK ANNEXURE-A.
C
Nonestab
Category : p
Grade : Grade III
Size :
M
1Machine Tool Proto Type Factory
Name
Specification
Use
Status
1) MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00[71]()
Specification : MAIN BODY FOR POINT DETONATION FUZE EMPTY MK II AS PER ODC DRG NO 140 21 31 00.
3) BOX H-60 MK-I NEW W/O FMT (ARMY&NVL) (6570010000)()
BOX H-60 MK-1 (INDIA) (NEW) AS PER DRG. LIST NO. ARM-1253 NO. OF SHEETS-3, SHEET-1 R.NO. 9 DT. 7/03/02 SHEET-2 R.NO. 5 DT. 31/07/96 SHEET-3 R.NO. NIL DT. 2/3/98 TO DRG.NO. ARM-1253-D1 (WITHOUT FITMENTS) R.NO. 6 DT. 27/06/96 SPECN: IA-1169 (n) DC-35576-A A
C
NOT ESTABLISHED
4) SET OF CARRIER 4A/L & CARRIER 5A/L (9911358263)()
SET OF CARRIER 4A/L AND CARRIER 5A/L SPECN.DETAIL AS BELOW:-AMMUNITION CONTAINER CARRIER-4A/L(STEEL) TO DRG. PT NO. ISV-335A DC(I) NO 33739-A DT 30/3/85 TO SPECN:-IA 1169(n) DC NO.35576-A, AIDE MEMOIRE P/11.AND AMMUNITION CONTAINER CARRIER-5A/L (STEEL) TO
C
NOT ESTABLISHED
5) AFT CLOSURE BLANK FOR HEAT-551 (9911357918)()
DRG.NO. 4103408/DRG.NO. TRD-2-2-2294
C
NOT ESTABLISHED
6) BOOSTER CUP & PIN FOR 84MM HEAT-551 (9911358084)()
BOOSTER CUP TO DRG.NO. TRD-2-2-2277 PIN TO DRG.NO. TRD-1-2-2278
C
NOT ESTABLISHED
7) VALVE DRG NO.5209565 FOR 84HEAT-551 (9911357921)()
DRG.NO. 5209565/DRG.NO. TRD-2-2-2247
C
NOT ESTABLISHED
8) TRACER BODY DRG NO.F1334-154780-D (9911334357) ()
TRACER BODY TO DRG NO.F1334-154780-D DC-36534-A DT. 6/3/99
C
NOT ESTABLISHED
9) STABILIZING TUBE F1301-026223-D (9911334347)()
DRG NO F-1301-026222-H DC NO. 37379-A DT.7-4-15 SPECN:F-1301-901480-C DT.30/6/78.
C
NOT ESTABLISHED
10) SET OF 8 COMP.FOR DELAY UNIT OF 551. (9911357954)()
SET OF 8 COMPONENTS FOR DELAY UNIT TO DRG NO. TRD-2-2-2226 OF 84MM HEAT-551. (1) CLOSING SLEEVE (2) CLOSING DISC (3) GASKET (4) DELAY BODY UPPER (5) DELAY BODY LOWER (6) WASHER (7) DISC (8) O RING 8.1 X 1.6
C
NOT ESTABLISHED
Category : P
Grade : III
Size :
L
1Grey Iron Foundry
Name
Specification
Use
Status
1) Machining of Cylinder ()
As per Drg. & Specification
C
Not Established
Category : DP
Grade : III
Size :
L
40
MAHINDRA DEFENCE NAVAL SYSTEMS PVT. LTD.
HISSA NO. 625/1/2, BEHIND GOLDEN WEIGH BRIDGE, PUNE NASIK HIGHWAY, KURULI, TAL KHED, DIST. PUNE, MAHARASHTRA
PIN1 : 410501
Phone No. : 02135-670703 FAX: 02135-670713/16 GSTIN :
27AAHCM9573A1ZB
SET OF MODULE ASSEMBLY TO DRG.NO. 0303 00 01 03 000 00PB & WITH TEN (10) COMPONENTS FOR PRE-FRAG 100-120 KG BOMB TO ARDE SPECN: ARDE/SPECN/669 DT. DEC. 2007 REV. 2 DT. 07/06/12
C
NOT ESTABLISHED
Category : P
Grade : III
Size :
S
1Ordnance Factory Ambajhari
[ENR Registration]
Name
Specification
Use
Status
1) RHE WARHEAD EMPTY TO ARDE DRG 8603 03 01 01 00 000 00DE REV 03 DT 12 09 12 OR LATEST AMND DRG AS ON TE DATE
Description : RHE WARHEAD EMPTY TO ARDE DRG 8603 03 01 01 00 000 00DE REV 03 DT 12 09 12 OR LATEST AMND DRG AS ON TE DATE()
