1) BUSH OF BASE BOOSTER CASING TO DRG NO AAIWBS00722A[62]()
Specification : BUSH OF BASE BOOSTER CASING TO DRG NO. AAIW/BS-0072/2A.
A) COMPONENT WILL BE SUPPLIED BY THE FIRM WITH FIRM MATERIAL
B) MATERIAL TEST CERTIFICATE FROM NABL ACCREDIATED LAB SHOULD BE SENT ALONG WITH COMPONENTS.
C) INSPECTION BY AAIW, KHA
C
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) OPERATION DEEP HOLE DRILLING item code 0000000300[00]()
1) ELECTRIC AIR VALVE 3K 48 REQ FOR DRG NO SB114 IN FINISHED CONDITION[72]()
Specification : ELECTRIC AIR VALVE 3K-48 (REQ. FOR DRG. NO. SB114)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6331451400 MS TARGET BLOCK FOR PROOFING 145 MM[63]()
Specification : IS:2062 (GRADE E 250A
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330301300 MS TARGET BLOCK FOR 30 MM CHARGE[63]()
Specification : MS TARGET BLOCK FOR PROOF OF 30 MM SHAPED CHARGE (SIZE DIA300 MM X 100 MM) & QAP NO. HEMRL/HE/ADD/08/01 REV. 00 OF09/2008, MATERIAL SPECN. IS-2062:1999.
S
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Link for AO 18 AK 630 Drg no 3 AO 18 001 AS PER TECH SPECN NO 3 AO 18 001 TY NASK 835 PROV[72]()
Specification : AS PER DRAWING
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX 1709 WITHOUT PASSOIATION AND LACQUERING[91]()
Specification : MACHINING AND PROCESSING OF MAGAZINE IN FINISHED CONDITION TO DRG NO QX-1709 WITHOUT PASSOVATION & LACQUERING
C
Nonestab
2) GRENADE BODY BLANK TO GSF DRG NO M 11220[62]()
Specification : AS PER DRAWING
R
Nonestab
3) SEMI STAGE MACHINING OF CENTRAL SPIDER SPROCKET TO DRG NO M 11441 FROM INPUT MATERIAL[91]()
Specification : SEMI STAGE MACHINING OF CENTRAL SPIDER/SPROCKET TO DRG NO M-11441 FROM INPUT MATERIAL I/CODE NO. 0372150165 (MACHINING AS PER PROCESS SCHEDULE)
P
Nonestab
4) MACHINING AND PROCESSING OF BODY CASTING FORGING TO GSF DRG NO C 1946H TO BODY OF 84 MM TPT TO DRG NO F1301 047291G[91]()
Specification : MACHINING AND PROCESSING OF BODY CASTING/ FORGING TO GSF DRG. NO. C-1946H TO BODY OF 84 MM TPT TO DRG. NO. F1301-047291G
C
Nonestab
5) MACHINING AND PROCESSING OF AL ALLOY ROD 36MM SPECN IS 733 1983 GR 24345 IN WP CONDITION MATERIAL CLASS B OF IS 3965 1981 TO NOSE OF 84MM TPT TO DRG NO F1301 047062E WITHOUT SURFACE TREATMENT[91]()
Specification : MACHINING AND PROCESSING OF AL ALLOY ROD 36MM SPECN IS 733:1983 GR 24345 IN WP CONDITION MATERIAL CLASS B OF IS-3965-1981 TO NOSE OF 84MM TPT TO DRG. NO. F1301-047062E (WITHOUT SURFACE TREATMENT)
C
Nonestab
6) MACHINING AND PROCESSING OF BLANK DISTANCE TUBE TO OFAJ DRG NO CC533 C TO DISTANCE TUBE OF 84 MM TPT TO DRG NO F 1301 047281 D WITHOUT SURFACE TREATMENT[91]()
Specification : MACHINING AND PROCESSING OF BLANK DISTANCE TUBE TO OFAJ DRG. NO. CC533-C TO DISTANCE TUBE OF 84 MM TPT TO DRG. NO. F 1301-047281 D (WITHOUT SURFACE TREATMENT)
C
Nonestab
7) SEMI MACHINED STAGE UP TO KNURLING OPERATION OF 30 MM HEI BODY FROM INPUT STEEL ROD 32MM ITEM CODE NO 0353405132 TO OUTPUT DRG NO M 11209C FOR 30 MM HEI BMP II STORE[91]()
Specification : SEMI MACHINED STAGE (UP TO KNURLING OPERATION) OF 30 MM HE/I BODY FROM INPUT STEEL ROD 32MM (ITEM CODE NO:- 0353405132) TO OUTPUT DRG. NO M-11209C FOR 30 MM HE/I (BMP-II) STORE (I/C- 9140033922)
C
Nonestab
8) MACHINING AND PROCESSING OF AL ROD 22 MM DIA TO PRODUCE CASE IN FINISHED CONDITION TO DRG PT NO IQX 318 WITHOUT SURFACE TREATMENT[91]()
Specification : MACHINING AND PROCESSING OF AL ROD 22 MM DIA +0.25 MM TO PRODUCE "CASE" IN FINISHED CONDITION TO DRG PT NO IQX-318 (WITHOUT SURFACE TREATMENT)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) Complete machining of remover 9 A 62109 001 from input material IC 7299000234 to be supplied by GSF IC 9140701109[91]()
Specification : Complete machining of remover (9-A-621.09.001) from input material I/C- 7299000234 to be supplied by GSF (I/C-9140701109)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF PINION SHAFT TO DRG No AO 18 03 019 FROM FORGING DRG NO F 2302[91]()
Specification : FABRICATION OF PINION SHAFT TO DRG. No. AO-18.03.019 FROM FORGING DRG NO F-2302
P
Nonestab
2) FABRICATION OF PINION TO DRG NO AO 18 03 025 FROM PINION FORGING DRG NO F2301[91]()
Specification : FABRICATION OF PINION DRG. No. AO-18.03.025 FROM PINION FORGING DRG. NO. F-2301
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) CAM PLATE STAGE OPERATION ROUGH TURNING HEAT TREATMENT THEN FINISH INSIDE AND OUTSIDE GRINDING TO DRG NO M 11456[91]()
Specification : CAM PLATE ( STAGE OPERATION ROUGH TURNING HEAT TREATMENT THEN FINISH INSIDE AND OUTSIDE GRINDING) TO DRG NO M 11456
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) FABRICATION OF BRACKET DRG NO 9 A 621 02 002[91]()
Specification : FABRICATION OF BRACKET DRG. NO. 9-A-621.02.002 FROM RAW MATERIAL AS PER PROCESSES SCHEDULE
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) STABILIZER ASSEMBLY TO DRG NO 4 025998 det no 030Cb SK NO OTF S 028 FOR SHELL 125 HEAT[62]()
Specification : STABILIZER ASSEMBLY TO DRG. NO. 4-025998 det. no. 030Cb (SK. NO. OTF/S/028) FOR SHELL 125 HEAT
C
Nonestab
2) MACHINING AND PROCESSING OF STABILIZER BODY TO DRG NO 4 025998 023 FOR MARKING REFER DRG NO CQA A AMN 3187 FROM INPUT MATERIAL[91]()
Specification : MACHINING AND PROCESSING OF STABILIZER BODY TO DRG NO 4-025998-023 (FOR MARKING REFER DRG NO CQA(A)/AMN/3187)FROM INPUT MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) PRE MACHINED BLANK TO DRAWING TEND 2639 STAR 2 CYLINDER FOR 38MM MSL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK TO DRAWING TEND 2639*2 REQUIRED FOR 33P 2011 CYLINDER FOR 38MM MSL WITH FIRM'S MATERIAL
C
Nonestab
2) PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRMS MATERIAL[70]()
Specification : PRE MACHINED BLANK DRAWING TO TEND 2637 CYLINDER FOR 40MM MGL WITH FIRM'S MATERIAL
C
Nonestab
3) Base left cylinder gas to DSCAT NO 1005 007317 A2628[70]()
Specification : Base left cylinder gas to DSCAT NO 1005 007317 A2628 DC NO 27095 SA for DC Latest to be followed with firm's material required for 12.7mm AD Gun LF NO 7013998062
C
Nonestab
4) Base right cylinder gas to DSCAT NO 1005 007314 A2627 DC NO 26990 SA[70]()
Specification : Base right cylinder gas to DSCAT NO 1005 007314 A2627 DC NO 26990 SA for DC Latest issued to be followed with firm's material required for 12.7mm AD Gun LF NO 7013998056
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK TO VENTURI IN SEMI FINISHED CONDITION[91]()
Specification : MACHINING OF VENTURI FOR 84MM RL MK III FROM SINGLE PIECE PYT FORGING BLANK (DRG. NO. M-10857B) TO VENTURI IN SEMI FINISHED CONDITION (DRG. NO. M-11593)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) CAP BEARING HALF TO DS CAT NO 3120 004519 FOR 81 MM LIGHT MORTAR IN FC[70]()
Specification : AS PER DRAWING
C
Nonestab
2) BUFFER ASSY TO DS CAT NO 1015 001482 FOR 81 MM LIGHT MORTAR IN FC[70]()
Specification : AS PER DRAWING
C
Nonestab
3) CLAMPING COLLAR TO DS CAT NO 3120 004520 FOR 81 MM LIGHT MORTAR IN FC[70]()
Specification : CLAMPING COLLAR TO DS CAT NO. 3120-004520 FOR 81 MM LIGHT MORTAR IN F/C
C
Nonestab
4) LEG LEFT ASSY TO DS CAT NO 1015 001548 FOR MOUNTING ASSY OF 81MM MORTAR IN FC[70]()
Specification : AS PER DRAWING
C
Nonestab
5) MOUNTING GENERAL ASSY FOR 81 MM MORTAR TO DS CAT NO 1015 001480 PART NO AMG 72895 1 AND SHT 2 IN FC[70]()
Specification : AS PER DRAWINGS
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) LOCK NUT FOR 12 BORE MODIFIED PUMP ACTION GUN[70]()
Specification : 84MM TWIN CONTAINER/ROUND PART NO.1202502.
C
Nonestab
14) TWIN CONTAINER 520 9 PART 1202503 LF 9911358476[99]()
Specification : TWIN CONTAINER 520:82/ROUND PART NO.1202503 TO OEM DRG.NO. 04110302/TRD DRG.NO.3.2.2568.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6570250309 PACKING FITMENT FOR MINE AT 1B ND[65]()
Specification : PACKING FITMENT FOR MINE A/T 1B WITH FUZE (QTY 4 NOS.) INBOX C-44A AS PER DRG NO. FQ/XI/177
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6330901000 SHAPED CHARGE 90 MM E ASSY CONSISTING OF 2 COMPONENTS TODRG NO HE CAST 018 DET 2 AND DET 4 AND QAP NO HEMRL HE ADD 08 01 REV 00 OF 09 2008[63]()
Specification : SHAPED CHARGE 90 MM (E.ASSY) CONSISTING OF 2 COMPONENTS TODRG. NO. HE/CAST 018 DET 2 & DET 4 & QAP NO. HEMRL/HE/ADD/08/01 REV.00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6338501000 RIGID CUTTING CHARGE EMPTY 85 MM ASSY[63]()
Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/043 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) QAP NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008
C
Nonestab
2) 6331001000 RIGID CUTTING CHARGE EMPTY 100 MM ASSY[63]()
Specification : RIGID CUTTING CHARGE(EMPTY) ASSLY TO DRG NO. HE/CAST/044 DET 1 TO 24 ( EXCLUDING BOOSTER PALLET & COUPLING PALLET ) & specn NO. HEMRL/HE/ADD/08/01 REV 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6333501000 CASING ASSLY FOR MODULAR CHARGE 350[63]()
Specification : CASING ASSLY FOR MODULAR CHARGE 350 GM CONSISTING OF 03 COMP ONENTS TO DRG.NO.HE/CAST 038 DET 1 TO DET 3, 3 COMPONENT TO DRG.NO.HE/CAST 035 DET 4 TO DET 6, & QAP NO. HEMRL/HE/ADD/08 /01 REV. 00 OF 09/2008
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6332201000 CASING ASSLY FOR MODULAR CHARGE 220[63]()
Specification : CASING ASSLY FOR MODULAR CHARGE 220 GM CONSISTING OF 03 COMPONENTS TO DRG.NO. HE/CAST 037 DET 1 TO 3, 3 COMPONENT TO DRG NO.HE/CAST 035 DET 4 TO 6, & QAP NO. HEMRL/HE/ADD/08/01REV. 00 OF 09/2008
Specification : TWIN CONTAINER 520:9 TO DRG NO.02032398/DRG NO.TRD-422155.
P
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
[ENR Registration]
Name
Specification
Use
Status
1) CAP AND BOTTOM FOR 84MM HEAT 751 LF 9911358519
Description : CAP AND BOTTOM FOR 84MM HEAT 751 LF 9911358519()
Specification : CAP-PART NO.4102085 TO OEM DRG.NO.304031170/TRD DRG.NO.4.2.2516 & BOTTOM- PART NO..6414118 TO OEM DRG.NO. 304101481/TRD DRG.NO. 1.2.2409.
R
Nonestab
2) CAP AND BOTTOM FOR 84MM SMOKE 469C LF 9911358520
Description : CAP AND BOTTOM FOR 84MM SMOKE 469C LF 9911358520()
Specification : CAP - PART NO.4102110 TO OEM DRG.NO.301178701/TRD DRG.NO.4.2.2743 & BOTTOM- PART NO. 6413039 TO OEM DRG.NO. 304061652/TRD DRG. NO.2.2.2742
R
Nonestab
3) 2nd SET OF 3 PLASTIC ITEMS FOR MMHG LF 9911358525
Description : 2nd SET OF 3 PLASTIC ITEMS FOR MMHG LF 9911358525()
Specification : 2ND SET OF 3 PLASTIC ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.BLAST CUP DRG.NO TBRL/MMG-H/MK-1/036/R0 2.PLUG RETAINING DRG.NO TBRL/MMG-H/MK-1/041/R0 3.FRAGMENTING SLEEVE DRG.NO TBRL/MMG-H/MK-1/038/R0
R
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BALLISTIC CAP ASSY.5209 540 FOR 551[99]()
Specification : BALLISTIC CAP ASSEMBLY TO DRG NO.5209 540.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CAP AND BOTTOM SPECN F1301-905060-P[99]()
Specification : CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SET OF INNER PACKING FITMENT OF BOX C-235[99]()
Specification : SET OF INNER PACKING OF BOX C-235 FOR PACKING OF 25 LBS BOMB TO OFK DRG.NO.KhPK-210098.
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) SLIPPING RING LF 6770430100[67]()
Specification : SLIPPING RING TO DRG. NO. F-1301-152220-B DC NO-36730-A DTD. 15/01/01 SPECN:- F1301-924320-D (CQA-4919)DC NO-36730-A DTD15/01/01
C
Nonestab
2) SLIPPING RING PART NO 6414119 LF 9911358441[99]()
Specification : SLIPPING RING PART NO.6414119 TO OEM DRG.NO.301069467/ TRD.DRG.NO.1.2.2592
C
Nonestab
3) SEALING RING PART NO 6413249 LF 9911358408[99]()
Specification : SEALING RING PART NO.6413249 TO OEM DRG.NO.304101502/ TRD.DRG.NO 1.2.2420
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) CAP AND BOTTOM SPECN F1301 905060 P LF 9911350158[99]()
Specification : CAP TO DRG NO-F1301-024351-J DC NO.36522-A DT 10/02/99 SPECN F1301-905060-P DT 7/1/91 & BOTTOM TO DRG NO F1301-029650-EDC NO.36816-A DT.25/02/02 SPECN.F1301-905060-P DT.07/01/91.
C
Nonestab
2) CAP AND LOCK BOTTOM F1301 905060 P 2013998518[20]()
Specification : CAP TO DRG.NO. F1301-024351-J DC NO. 36522-A DT. 10/02/99 AND LOCK BOTTOM TO DRG.NO. F1301-029651-F DC NO. 36771-A DT. 31/07/01 SPECN: F1301-905060-P DT. 07/01/91
C
Nonestab
3) PROFEEL INNER PKG OF FZ ASY M GR LF 9911358099[99]()
Specification : SET OF INNER PACKING FITMENT FOR PACKING OF FUZE ASSEMBLY TO TBRL DRG.NO.9774 DET NO.2(PIECE HOUSING-II)3 NOS.IN A SETWITH PIECE PACKING TO TBRL DRG.NO.9774 DET.4 2 NOS IN A SETFOR MULTI MODE HAND GRENADE.
R
Nonestab
4) PACKING FITMENTS BOTTOM AND TOP LF 9911356664[99]()
Specification : PACKING FITMENTS CONSISTING OF ONE NO.EACH OF THE FOLLOWING:1.BOTTOM TO DRG. PT. NO: ISV-1976 DC-36073-A DT 31/01/96.2.TOP TO DRG. PT. NO. : ISV-1975 DC-36073-A DT 31/01/96.
C
Nonestab
5) SET OF INNER PACKING FITMENT FOR PACKING OF MAIN BODY ASSY LF 9911358102[99]()
Specification : SET OF INNER PACKING FITMENT FOR PACKING OF MAIN BODY ASSY. TO TBRL DRG.NO.9774 DET NO.1(PIECE HOUSING-I)2 NOS.IN A SETWITH PIECE PACKING TO TBRL DRG.NO.9774 DET.4(2 NOS IN A SET)FOR MULTI MODE HAND GRENADE.
P
Nonestab
6) CAP AND BOTTOM FOR 84MM HEAT 751 LF 9911358519[99]()
Specification : CAP-PART NO.4102085 TO OEM DRG.NO.304031170/TRD DRG.NO.4.2.2516 & BOTTOM- PART NO..6414118 TO OEM DRG.NO. 304101481/TRD DRG.NO. 1.2.2409.
C
Nonestab
7) CAP AND BOTTOM FOR 84MM SMOKE 469C LF 9911358520[99]()
Specification : CAP - PART NO.4102110 TO OEM DRG.NO.301178701/TRD DRG.NO.4.2.2743 & BOTTOM- PART NO. 6413039 TO OEM DRG.NO. 304061652/TRD DRG. NO.2.2.2742
C
Nonestab
8) 3rd SET OF 4 ITEMS FOR MMHG 9911358526[99]()
Specification : 3rd SET OF 4 ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.'O'RING FOR MAIN HOUSING (QTY.-2NOS.) DRG.NO.TBRL/MMG-H/MK-1/042/R0 2. 'O'RING FOR MAGAZINE DRG.NO.TBRL/MMG-H/MK-1/043/R0 3. PULL RING DRG.NO.TBRL/MMG-H/MK-1/044/R0 4. SEALING BUS
C
Nonestab
9) 2nd SET OF 3 PLASTIC ITEMS FOR MMHG LF 9911358525[99]()
Specification : 2ND SET OF 3 PLASTIC ITEMS FOR MMHG CONSISTS OF FOLLOWING ITEMS. 1.BLAST CUP DRG.NO TBRL/MMG-H/MK-1/036/R0 2.PLUG RETAINING DRG.NO TBRL/MMG-H/MK-1/041/R0 3.FRAGMENTING SLEEVE DRG.NO TBRL/MMG-H/MK-1/038/R0
C
Nonestab
10) 7th set of 3 items for MMHG 9911358531[99]()
Specification : 7th set of 3 items for MMHG consists of Following items-
1. CAP DRG no. TBRL/MMG-H/MK-I/037/R0
2. Fuze Body Assy. (Empty)Drg. no. TBRL/MMG-H/MK-1/034/R1
3.Magzine holder Drg no. TBRL/MMG-H/MK-1/040/R1
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) AMMN CONTAINER 69 A/L PLASTIC ARDE[65]()
Specification : CQA(A)2804
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ammunition Factory Khadki
Name
Specification
Use
Status
1) ANTISTATIC PLASTIC BOX POLY PROPYLENE COPOLYMER PPCP WITH ANTISTATIC GRAIN FOR PACKING OF CARTRIDGE S A 9 MM BALL[65]()
Specification : DRAWING NO AFK/PROV-51 DTD.12.10.2016 & 15.05.2017
1) PIN FIXING BARREL AS PER DRG NO K 1011 WITH FIRMS MATERIAL[70]()
Specification : AS PER DRG NO K 1011 WITH FIRMS MATERIAL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MFG & SUPPLY OF SPRING LEVER LOCKING BARREL TO DRG NO.32P1008*5 FULLY FINISHED WITH FIRM'S MATERIAL REQUIRED FOR 40MM UBGL[70]()
Specification : AS PER DRG NO.32P1008*5
E
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) TRACER BODY DRG NO.F1334-154780-D[99]()
Specification : TRACER BODY TO DRG NO.F-1334-154780-D, DC-36534-A DT.6/3/99
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) BOOSTER CUP and PIN FOR 84MM HEAT 551 LF 9911358084[99]()
Specification : SET OF BOOSTER CUP AND PIN FOR 84MM HEAT-551 AMMN. (BOOSTER CUP TO DRG NO.TRD-2-2-2277 & PIN TO DRG NO.TRD-1-2-2278 ).
C
Nonestab
2) PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817[99]()
Specification : 81 MM PRIMER BODY TO DRG NO. IQX 861DC NO 36304-A DT. 03/07/97, SPECIFICATION OF MATERIAL, PROTECTIVE FINISH AND OTHER GENERAL REQUIREMENT TO THE
COMPONENT AS PER SPECIFICATION MENTIONED IN DRG NO. IQX861DC NO 36304-A DT. 03/07/97 & 04/
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1565170625 BAND PVC PLASTIC 25 MM X 1.0 MM TH.[15]()
Specification : PVC PLASTIC BAND (WHITE) SIZE - 25 MM WIDE X 0.5 MM THICK +-0.1 MM SPECN. IS: 9766 -1992 (FIRST REV.) CLASS I, TYPE 'A', MATERIAL FLEXIBLE PVC COMPOUND CONFIRMING TO ABOVE SPECIFICTION.
R
Nonestab
2) 2101114049 CORD NYLON 15MM CIRCUM FOR RKT 68MM[21]()
Specification : JSS-4020-06: 2006
R
Nonestab
3) 6192229966 PLUG SEALING RUB FOR RKT 68MM HE HC P[61]()
Specification : SEALING PLUG (RUBBER) TO DRG.NO. ARDE-1135 DET.NO. 2 AL.NO. 21/94 DT. 12-10-1994 FOR ROCKET 68 MM HE/HC/PRACTICE.
C
Nonestab
4) 6262102100 RING RUB VUL QX 1492 FOR 105MM TKSH[62]()
Specification : IND/ME/728
C
Nonestab
5) 2029992283 RING SECURING ISV 1122[20]()
Specification : SECURING RING,DRG.PART NO.ISV-1122, DC 35975-A.
C
Nonestab
6) 6143102151 RING NYLON TO DRG NO ISX 426[61]()
Specification : NYLON RING TO DRG.PART NO. ISX 426 DC NO. 36342-A FOR SHELL, 130 MM, HE, 1B PLUGGED FILLED ASSY.
C
Nonestab
7) 6572129006 CONTAINER 38 B WITHOUT FITMENTS[65]()
Specification : CQA(A) 2804(M)
C
Nonestab
8) 6141600000 MINE APERS M 14 EMPTY WITH FZ INTGL[61]()
Specification : CQA (A) 1837
C
Nonestab
9) 6491338958 PLUG FUZE HOLE 35 MM FOR 81 MM HE[64]()
Specification : PLUG,FUZE HOLE,35 MM NO.6,DESIGNER REF. CIA/AMN/2125 PART NO.ITV 95 DC NO.36172-A.
C
Nonestab
10) 6143102150 RING NYLON PT NO ITV 50 81MM HE ANDPWP[61]()
Specification : NYLON RING TO DESIGNER'S REF.CIA/AMN/1579, PT.NO.ITV-50 DC- 36257-A. DT.14-3-97.
C
Nonestab
11) 2103678110 CHLORINATED RUBBER TO SPECIFICATION[21]()
Specification : IND/ME/513
R
Nonestab
Category : p
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 1412402313 PAPER KRAFT AMMN 482X635 MM 125 GSM[14]()
Specification : SPECN. NO. JSS 8135-017
R
Nonestab
2) 6473200483 O RING (MOD) FOR 155MM ERFB BB[64]()
Specification : SPECN. NO. IND/ME/914
C
Nonestab
3) 2103789155 POLYTHENE LAY FLAT 200 X 0.076 MM.[21]()
Specification : JSS 9330-03:2007 REVISION NO 2
C
Nonestab
4) 6141800106 WASHER SPRING ITX-240 MINE AP 1B DR[61]()
Specification : WASHER, SPRING FOR ASSLY OF MINE AP 1B DIRECTIONAL.
Specification : MS PLATE OF SIZE-1100 X 100 X 10MM (IS 2062-1994 OF ANYGRADE)
C
Nonestab
2) 0133030115 MS PLATE SIZE 400[01]()
Specification : MS PLATE OF SIZE 400 X 200 X 6MM (IS 2062-1994 OF ANYGRADE)
C
Nonestab
3) 0133030113 MS PLATE SIZE 450 MM[01]()
Specification : MS PLATE OF SIZE 450 X 450 X 50MM (IS-2062-1994 OF ANYGRADE)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Chanda
Name
Specification
Use
Status
1) 6333501102 MS TARGET PLATE[63]()
Specification : MS TARGET PLATE THICKNESS 5 MM AS PER OFCH DRG. NO. OFCH/PR/236
C
Nonestab
2) 6333501101 MS TARGET PLATE[63]()
Specification : MS TARGET PLATE THICKNESS 1.5 MM AS PER OFCH DRG. NO. OFCH/PR/235
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Metal and Steel Factory
Name
Specification
Use
Status
1) STEEL BLANKS TO SIZE 125 MM X 125MM X 3.15 (+/- 0.05) MM THICK: STEEL SPECIFICATION:- IS:513/1994 GRADE DD (DEEP DRAWN QUALITY) : WITH BEST SURFACE FINISH CONDITION.[44]()
Specification : STEEL BLANKS TO SIZE 125 MM X 125MM X 3.15 (+/- 0.05) MM THICK: STEEL SPECIFICATION:- IS:513/1994 GRADE DD (DEEP DRAWN QUALITY) : WITH BEST SURFACE FINISH CONDITION.
C
Estab
Category : p
Grade : Grade III
Size :
S
1) Rifle Factory Ishapur
Name
Specification
Use
Status
1) LOCK NUT FOR 12 BORE MODIFIED PUMP ACTION GUN[70]()
1) STAINLESS STEEL ERW PIPE AS PER DRG. NO. V548-0129-4019()
Specification : AS PER DRG. NO. V548-0129-4019
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Kanpur
Name
Specification
Use
Status
1) NUT to part no.2A46M-01-23()
Specification :NUT to part no. 2A46M-01-23
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun Carriage Factory
Name
Specification
Use
Status
1) CABLE ASSY SPECIAL PURPOSE ELECTRICAL 3 CORE DRG NO GCF LM 1442 B REF DRG NO 5080664 PT NO M 2 5995 001856[90]()
Specification : CABLE ASSY SPECIAL PURPOSE ELECTRICAL 3 CORE DRG NO GCF LM 1442 B REF DRG NO 5080664 PT NO M 2 5995 001856
C
Nonestab
2) CABLE ASSY SPECIAL PURPOSE ELECTRICAL 2 CORE ILLUMINATION TRVERSE SCALE 1135 MM LONG TO CAT PT NO M2 BOF 6151669 SHT CAT PART NO M2 5995 001869[90]()
Specification : CABLE ASSY SPECIAL PURPOSE ELECTRICAL 2 CORE ILLUMINATION TRVERSE SCALE 1135 MM LONG TO CAT PT NO M2 BOF 6151669 SHT CAT PART NO M2 5995 001869
C
Nonestab
Category : p
Grade : 3
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL[70]()
Specification : FRONT FRAME BLANK TO DRG TEND 2630 REQ FOR MGL
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Khamaria
Name
Specification
Use
Status
1) PRIMER BODY DRG NO IQX861 DC36304 A LF 9911358817[99]()
Specification : 81 MM PRIMER BODY TO DRG NO. IQX 861DC NO 36304-A DT. 03/07/97, SPECIFICATION OF MATERIAL, PROTECTIVE FINISH AND OTHER GENERAL REQUIREMENT TO THE
COMPONENT AS PER SPECIFICATION MENTIONED IN DRG NO. IQX861DC NO 36304-A DT. 03/07/97 & 04/
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Steel Blank of Cylinder Gas[01]()
Specification : Steel Blank of Cylinder Gas To Drg. No. SKM-889* without heat treatment (Steel Forging SKM-306*6 LF No. 0144079003 to be issued by SAF against B/G).
C
Nonestab
2) CYLINDER GAS FOR LMG BELT FED[70]()
Specification : CYLINDER GAS AS PER DRG.NO.1804 01 01 01 00 001 00DA REQUIRED FOR LMG 7.62MM X 51MM BELT FED
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) SCREW AS PER DRAWING NO SK 6506 TE[70]()
Specification : SCREW AS PER DRAWING NO SK 6506 TE
C
Nonestab
2) LATCH AS PER DRAWING NO SK 6519 TE[70]()
Specification : LATCH AS PER DRAWING NO SK 6519 TE
C
Nonestab
3) SLIDE DRG No SK 6534 TE[70]()
Specification : SLIDE DRG No SK-6534/TE
C
Nonestab
4) PIN DRG No SK 6531 TE[70]()
Specification : PIN DRG No SK- 6531/ TE
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF MGL BLOCK SCREW PISTOL GRIP TO DRG NO 30P 3015 ST 3 WITH FIRM MATERIAL
R
Nonestab
2) MANUFACTURE AND SUPPLY OF MGL BUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITH FIRMS MATERIAL[70]()
Specification : MANUFACTURE AND SUPPLY OF MGL BUSH EXTRACTOR BEFORE ANODIC COATING TO DRG NO TEND 2261 ST WITH FIRMS MATERIAL
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Gun and Shell Factory
Name
Specification
Use
Status
1) MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING OR FORGING TO GSF DRG NO C 1946H DT 25 04 17 TO BODY OF 84 MM TPT TO DRG NO F1301 047291G WITHOUT SURFACE TREATMENT[91]()
Specification : MACHINING AND PROCESSING OF BLANKS FOR BODY CASTING / FORGING TO GSF DRG. NO. C-1946H DT.25-04-17 TO BODY OF 84 MM TPT TO DRG NO F1301-047291G (WITHOUT SURFACE TREATMENT)
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Ordnance Factory Tiruchirapalli
Name
Specification
Use
Status
1) Block Gas to ICR 1322 with OFT material[70]()
Specification : Block Gas to drawing No. ICR 1322 DS CAT No/1005-001510, DC No. 26759-SA dated 29.05. 215 with OFT mtl
C
Nonestab
2) GUIDE RECOIL FRONT[74]()
Specification : GUIDE RECOIL FRONT (View) AS PER DRG NO.075870A-00 FOR CRADLE WEAPON ASSY OF SRCG
C
Nonestab
3) MANUFACTURING AND SUPPLY OF PAWL TO DRG NO C5096 IN FULLY FINISHED CONDITION WITH FIRMS MATERIAL LATEST TO BE FOLLOWED[70]()
Specification : As per TE
C
Nonestab
4) MANUFACTURING AND SUPPLY OF C1092 F STRIPER TEND 2739 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
5) MANUFACTURING AND SUPPLY OF C1093 R STRIPER AS PER DRG NO TEND 2740 WITH OFT MATERIAL SEMI FINISHED[70]()
Specification : As per TE
C
Nonestab
6) MANUFACTURING OF SUPPLY OF PRE MACHINED BLANK TO DRG NO TEND 2747 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM CASING C2012 RAW MATERIAL WILL BE SUPPLIED BY OFT[70]()
Specification : AS per TE
C
Nonestab
7) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRAWING NO TEND 2727 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM GAS CYLINDER C2035 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2035 200 D3[70]()
Specification : As per TE
C
Nonestab
8) MANUFACTURING AND SUPPLY OF PRE MACHINED BLANK TO DRG NO TEND 2726 WITHOUT HEAT TREATMENT REQUIRED FOR 30MM BARREL CATCH C2037 FORGINGS WILL BE SUPPLIED BY OFT FORGING DRAWING NO 64C 2037 200 E3[70]()
Specification : As per TE
R
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Body Trigger for MAG[61]()
Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) Body Trigger for MAG[61]()
Specification : BODY TRIGGER, PART NO. 1099A, DS CAT NO. 1005-006855 (WITHOUT ANODIZING) (MATL.WILL BE SUPPLY BY S.A.F. ON B/G DC(I) NO. 26752-SA, DT. 03.04.15
C
Nonestab
Category :
Grade : Grade III
Size :
S
1) Small Arms Factory
Name
Specification
Use
Status
1) AMMUNITION POUCH FOR GPMG[70]()
Specification : AMMUNITION POUCH FOR GPMG 7.62X51MM DRG. NO. SK-GPMG-6251
2) 6043000153 ADAPTOR TUBE ITV 13 A FOR 120MM PWP
Description : 6043000153 ADAPTOR TUBE ITV 13 A FOR 120MM PWP()
Specification : ADAPTER, TUBE, ASSY. TO DRG. PART NO. ITV 13-A DC NO. 36930-A FOR 120 MM PWP.
C
Estab
3) 6330130100 FZ 117 DA MK 20 E WITH CAP
Description : 6330130100 FZ 117 DA MK 20 E WITH CAP()
Specification : IA 1204 (LATEST ISSUE), DULY ACCEPTED IN PROOF AS PER CQA(A) PROOF SCHEDULE NO. CQA(A)/PS/ FZ/92/4 AND PROOF SCHEDULE NO. CQA (A)/PS/FZ/93/3.
C
Estab
4) 6380600100 PRIMER 18 A EMPTY
Description : 6380600100 PRIMER 18 A EMPTY()
Specification : PRIMER PERCUSSION 18A EMPTY TO DRG.PART NO.IQX-51 GE DC 36506-A DT.23/12/1998 WITH BODY AND MAGAZINE SEPARATELY.
C
Estab
5) 6473200484 SPACER (MODIFIED) FOR 155MM ERFB BB
Description : 6473200484 SPACER (MODIFIED) FOR 155MM ERFB BB()
Specification : SPACER FOR 155 MM ERFB (BB) DES.REF. 02676-20003A203 DC NO.37128-A DT.03/08/2007
1) READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004[00]()
Specification : READY MIXED PAINT AIR DRYING SEMI GLOOSY TYPE SPRAYING TO SPECN. IS:168:1993 (REAFFIRMED 2002) WITH INDIAN STANDARD COLOUR NO.359, COLOUR SHADE-MIDDLE BUFF TO SPEC.IS:5-2004
R
Nonestab
2) PAINT PRIMING REDOXIDE ZINC CHROME AMMN AIR DRYING MATT FINISH BRUSHING or SPRAYING[00]()
1) BOX C-235 (STEEL) WITH 10 MM HOLES (22 NOS.) (6570190100)[65]()
Specification : BOX C-235 (STEEL) WITH 10MM HOLES ( 22 NOS.) TO DRG NO.ARM- 1513 D1 R.NO.1 DT.26-04-04 SPECN.IA-1169 (n) DC-35576-A,AIDEMEMOIRE-P/11 DULY PAINTED WITH A COAT OF READY MIXED PAINT,AIR DRYING MATT FINISH BRUSHING/SPRAYIG/DIPPING FOR GENERAL
